ArticleslgStudy

science

Gait

Gait is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Gait rather than just read about it. In short: Gait is the pattern of movement of the limbs of animals, including humans, during locomotion over a solid substrate. Most animals use a variety of gaits, selecting gait based on speed, terrain, the need to maneuver, and energetic efficiency.

Gait — main illustration
Gait — illustration

Key takeaways

  • Gait belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Gait to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Gait from memory before moving on to harder problems.

Reference excerpt

Gait is the pattern of movement of the limbs of animals, including humans, during locomotion over a solid substrate. Most animals use a variety of gaits, selecting gait based on speed, terrain, the need to maneuver, and energetic efficiency. Different animal species may use different gaits due to differences in anatomy that prevent use of certain gaits, or simply due to evolved innate preferences as a result of habitat differences. While various gaits are given specific names, the complexity of biological systems and interacting with the environment make these distinctions "fuzzy" at best. Gaits are typically classified according to footfall patterns, but recent studies often prefer definitions based on mechanics. The term typically does not refer to limb-based propulsion through fluid mediums such as water or air, but rather to propulsion across a solid substrate by generating reactive forces against it (which can apply to walking while underwater as well as on land). Due to the rapidity of animal movement, simple direct observation is rarely sufficient to give any insight into the pattern of limb movement. In spite of early attempts to classify gaits based on footprints or the sound of footfalls, it was not until Eadweard Muybridge and Étienne-Jules Marey began taking rapid series of photographs that proper scientific examination of gaits could begin.

Overview Milton Hildebrand pioneered the contemporary scientific analysis and the classification of gaits. The movement of each limb was partitioned into a stance phase, where the foot was in contact with the ground, and a swing phase, where the foot was lifted and moved forwards. Each limb must complete a cycle in the same length of time, otherwise one limb's relationship to the others can change with time, and a steady pattern cannot occur. Thus, any gait can completely be described in terms of the beginning and end of stance phase of three limbs relative to a cycle of a reference limb, usually the left hindlimb.

Variables

Gaits are generally classed as "symmetrical" and "asymmetrical" based on limb movement. These terms have nothing to do with left-right symmetry. In a symmetrical gait, the left and right limbs of a pair alternate, while in an asymmetrical gait, the limbs move together. Asymmetrical gaits are sometimes termed "leaping gaits", due to the presence of a suspended phase. The key variables for gait are the duty factor and the forelimb-hindlimb phase relationship. Duty factor is simply the percent of the total cycle which a given foot is on the ground. This value will usually be the same for forelimbs and hindlimbs unless the animal is moving with a specially trained gait or is accelerating or decelerating. Duty factors over 50% are considered a "walk", while those less than 50% are considered a run. Forelimb-hindlimb phase is the temporal relationship between the limb pairs. If the same-side forelimbs and hindlimbs initiate stance phase at the same time, the phase is 0 (or 100%). If the same-side forelimb contacts the ground half of the cycle later than the hindlimb, the phase is 50%.

Physiological effects of gait

Gait choice can have effects beyond immediate changes in limb movement and speed, notably in terms of ventilation. Because they lack a diaphragm, lizards and salamanders must expand and contract their body wall in order to force air in and out of their lungs, but these are the same muscles used to laterally undulate the body during locomotion. Thus, they cannot move and breathe at the same time, a situation called Carrier's constraint, though some, such as monitor lizards, can circumvent this restriction via buccal pumping. In contrast, the spinal flexion of a galloping mammal causes the abdominal viscera to act as a piston, inflating and deflating the lungs as the animal's spine flexes and extends, increasing ventilation and allowing greater oxygen exchange.

Differences between species Animals typically use different gaits in a speed-dependent manner. Almost all animals are capable of symmetrical gaits, while asymmetrical gaits are largely confined to mammals, who are capable of enough spinal flexion to increase stride length (though small crocodilians are capable of using a bounding gait). Lateral sequence gaits during walking and running are most common in mammals,[3] but arboreal mammals such as monkeys, some opossums, and kinkajous use diagonal sequence walks for enhanced stability.[3] Diagonal sequence walks and runs (aka trots) are most frequently used by sprawling tetrapods such as salamanders and lizards, due to the lateral oscillations of their bodies during movement. Bipeds are a unique case, and most bipeds will display only three gaits—walking, running, and hopping—during natural locomotion. Other gaits, such as human skipping, are not used without deliberate effort. Hexapod gaits have also been well characterized, particularly for drosophila and stick insects (Phasmatodea). Drosophila use a tripod gait where 3 legs swing together while 3 legs remain on the ground in stance. However, variability in gait is continuous. Flies do not show distinct transitions between gaits but are more likely to walk in a tripod configuration at higher speeds. At lower speeds, they are more likely to walk with 4 or 5 legs in stance. Tetrapod coordination (when 4 legs are in stance) is where diagonally opposite pairs of legs swing together. Wave (sometimes called a metachronal wave) describes walking where only 1 leg enters swing at a time. This movement propagates from back to front on one side of the body and then the opposite. Stick Insects, a larger hexapod, only shows a tripod gait during the larval stage. As adults at low speeds, they are most likely to walk in a metachronal wave, where only 1 leg swings at a time. At higher speeds, they walk in a tetrapod coordination with 2 legs paired in swing or a metachronal wave, only moving one leg at a time.

Energy-based gait classification

… excerpt ends here. Continue reading the full article.

Illustrations

Gait: Elephant walking.
Elephant walking.
Gait: Gait graphs in the style of Hildebrand. Dark areas indicate times of contact, bottom axis is % of cycle.
Gait graphs in the style of Hildebrand. Dark areas indicate times of contact, bottom axis is % of cycle.
Gait: Bison galloping.
Bison galloping.

Worked examples

Example 1 — a first encounter with Gait

Start with the simplest possible case. Write down what Gait claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Gait before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Gait ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Gait

In research
Gait appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Gait in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Gait is common in secondary-school and first-year university syllabi. It links to neighbouring topics Terrestrial locomotion, so understanding it makes those chapters shorter.
In everyday life
Look for Gait outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Gait in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Gait means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Gait out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Gait in simple terms?

Gait is the pattern of movement of the limbs of animals, including humans, during locomotion over a solid substrate. Most animals use a variety of gaits, selecting gait based on speed, terrain, the need to maneuver, and energetic efficiency.

Why does Gait matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Gait?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Gait.

Tags

  • Terrestrial locomotion

Keep exploring