ArticleslgStudy

engineering

Harling (wall finish)

Harling (wall finish) is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Harling (wall finish) rather than just read about it. In short: Harling is a rough-cast wall finish consisting of lime and aggregate, known for its rough texture. Many castles and other buildings in Scotland and Ulster have walls finished with harling.

Harling (wall finish) — main illustration
Harling (wall finish) — illustration

Key takeaways

  • Harling (wall finish) belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Harling (wall finish) to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Harling (wall finish) from memory before moving on to harder problems.

Reference excerpt

Harling is a rough-cast wall finish consisting of lime and aggregate, known for its rough texture. Many castles and other buildings in Scotland and Ulster have walls finished with harling. It is also used on contemporary buildings, where it protects against the wet Scottish and Ulster climates and eliminates the need for paint.

Technique Harling as a process covers stonework using a plastering process involving a slurry of small pebbles or fine chips of stone. After a wall is complete and has been pointed and allowed to cure then a base of lime render is applied to the bare stone. While this render is still wet a specially shaped trowel is used to throw the pebbles onto the lime surface, which are then lightly pressed into it. Harl, being mostly lime render, cures chemically rather than simply drying. After this setting process, the harl is sometimes lime washed in a colour using traditional techniques. It is not recommendable to replace more than around 20% of the lime content with cement. Cement-based render is very stiff and prone to crack or detach from the wall when subjected to stress induced by expansion due to solar radiation and moisture. It is also less permeable to moisture and water vapour. Water entering through fine cracks in the surface does not easily diffuse and can penetrate into the softer stone, thus causing the deterioration which harling aims to prevent. For similar reasons, modern barrier paints should not be used in place of traditional lime washes. An example of the inadequate protection afforded by high cement harling is the Charles Rennie Mackintosh designed Hill House completed in 1904 using the newly available but poorly understood Portland cement harling. Over the years water had penetrated the harling and threatened the overall integrity of the building. The National Trust for Scotland, the building's owner, has (2019) enclosed Hill House in a transparent 'box' which will allow some rain to enter but which will eventually allow it to dry naturally. It is estimated that this will take seven to ten years, after which the box will be removed.

Examples

The technique of harling features in a large number of famous Scottish buildings including:

Clark Cottage, Scotland on the island of Islay Crathes Castle in Aberdeenshire (16th century) Craigievar Castle in Aberdeenshire (17th century) Muchalls Castle in Aberdeenshire Myres Castle in Fife (1530 onwards) Stirling Castle in Stirling Castle of Park (Aberdeenshire)

Historic record

The word "harling" was used in this sense in building accounts written in the Scots language, possibly deriving from the name of a tool called a "harl". At Falkland Palace, in 1540, John Kelly and John Malcolm alias Callum worked on the "harling" of the chapel (its interior), the tennis court walls, the east turnpike turret, and the Cross House of the East Quarter. Some of the interiors were plastered by a French specialist craftsman called Hector Beato. The three craftsmen were known as "pargeonars" and their interior work was sometimes called "pargeoning". Lime for the work came from kilns on the nearby Lomond Hills or was shipped from Dundee to Lindores. Some lime called "unburnt plaster" shipped from Dundee was processed for use at Falkland using coal. The lime used with sand to "pergyn" two round turrets and vaulted entranceways or "transes" at Holyrood Palace in 1532 came from Cousland and Gilmerton.

See also Stucco Roughcast Pargetting

References

Further reading Meek, T., (1996) Case Studies of Traditional Lime Harling. Historic Scotland Addyman, T., Meek, T. (2019) Historic External Lime Finishes in Scotland. Technical Paper 31, Historic Environment Scotland Adderley, P., Meek, T. (2019) Harl-as-you-Go! Implications for robustness. Journal of the Building Limes Forum. Meek, T, (2020) The Practical and Cultural Implications of a Bare Stone Paradigm in Heritage Conservation. The Construction Historian Meek, T. (2022) Pointing and Joint Finishing in Scotland. Technical Paper 33. Historic Environment Scotland

External links Scottish Lime Centre

Illustrations

Harling (wall finish): Close view of the harling at Craigievar Castle
Close view of the harling at Craigievar Castle
Harling (wall finish): Craigievar Castle
Craigievar Castle
Harling (wall finish): The Great Hall at Stirling Castle
The Great Hall at Stirling Castle
Harling (wall finish): The East turnpike turret at Falkland Palace (on right), now without a surface finish, was harled by "Callum perjonar" in 1540.[5]
The East turnpike turret at Falkland Palace (on right), now without a surface finish, was harled by "Callum perjonar" in 1540.[5]

Worked examples

Example 1 — a first encounter with Harling (wall finish)

Start with the simplest possible case. Write down what Harling (wall finish) claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Harling (wall finish) before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Harling (wall finish) ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Harling (wall finish)

In research
Harling (wall finish) appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Harling (wall finish) in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Harling (wall finish) is common in secondary-school and first-year university syllabi. It links to neighbouring topics Architecture in Scotland, Building, Building materials, so understanding it makes those chapters shorter.
In everyday life
Look for Harling (wall finish) outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Harling (wall finish)” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Harling (wall finish) in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Harling (wall finish) means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Harling (wall finish) out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Harling (wall finish) in simple terms?

Harling is a rough-cast wall finish consisting of lime and aggregate, known for its rough texture. Many castles and other buildings in Scotland and Ulster have walls finished with harling.

Why does Harling (wall finish) matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Harling (wall finish)?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Harling (wall finish).

Tags

  • Architecture in Scotland
  • Building
  • Building materials
  • Plastering
  • Visual and material culture of Scotland

Keep exploring