ArticleslgStudy

engineering

Harry F. Olson

Harry F. Olson is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Harry F. Olson rather than just read about it. In short: Dr Harry Ferdinand Olson, E.E., Ph.D. (December 28, 1901 – April 1, 1982) was a prominent engineer and inventor with RCA Victor, the Acoustic Research Director of RCA Laboratories, Princeton, and a pioneer in the field of 20th century acoustical engineering notably in the fields of high-fidelity, digital music synthesis, microphones, loudspeakers, acoustics, radar, submarine communication, magnetic tape and noise re…

Harry F. Olson — main illustration
Harry F. Olson — illustration

Key takeaways

  • Harry F. Olson belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Harry F. Olson to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Harry F. Olson from memory before moving on to harder problems.

Reference excerpt

Dr Harry Ferdinand Olson, E.E., Ph.D. (December 28, 1901 – April 1, 1982) was a prominent engineer and inventor with RCA Victor, the Acoustic Research Director of RCA Laboratories, Princeton, and a pioneer in the field of 20th century acoustical engineering notably in the fields of high-fidelity, digital music synthesis, microphones, loudspeakers, acoustics, radar, submarine communication, magnetic tape and noise reduction. Olson wrote ten books including Dynamical Analogies, on electrical-mechanical-acoustical analogies, and had over one hundred patents.

Biography Harry F. Olson was born in Mount Pleasant, Iowa, to Swedish immigrant parents. Technically inclined from an early age, he built and flew model airplanes, constructed a steam engine and invented a wood-fired boiler that drove a 100-volt DC generator. Olson designed and built an amateur radio transmitter, gaining enough proficiency to be granted an operator's license. Olson went on to earn a bachelor's degree in electrical engineering from the University of Iowa then continued to earn a master's degree with a thesis on acoustic wave filters in solids and a doctorate in physics, working with polarization of resonance radiation in mercury. Immediately after completing his course of study in 1928, Olson moved to New Jersey to work for RCA Laboratories. Olson would remain at RCA for almost four decades.

Olson had a continuing interest in music, acoustics, and sound reproduction, and, by 1934, he was placed in charge of acoustical research at RCA. At RCA, Olson worked on a wide range of projects, which included developing microphones for the broadcasting and motion picture industries, improving loudspeakers, and making significant contributions to magnetic tape recording. Like many engineers of the World War II generation, Olson also made significant contributions to military technology as well, particularly to the fields of underwater sound and anti-submarine warfare. After the war Olson, along with Herbert Belar, developed the first modern electronic synthesizer. Equipped with electron tubes, the Mark II Sound Synthesizer was used to compose music, which was recorded and sold to the public. A prolific inventor and engineer, Olson was awarded more than 100 patents for the various types of microphones (including the widely used 44- and 77-series), cardioid (directional) microphones, loudspeaker baffles, air-suspension loudspeakers, isobaric loudspeakers, early video recording equipment, audio recording equipment, phonograph pickups, underwater sound equipment, noise reduction, sound technology in motion-pictures, and public-address systems he developed. He also authored 135 articles and ten books including an interdisciplinary text charting the dynamical analogies between electrical, acoustical and mechanical systems. In 1949, Olson was honored by being the first recipient of the Audio Engineering Society's John H. Potts Memorial Award, an award program which was later renamed the gold medal. In 1953-4 Olson served as president of the Acoustical Society of America, which awarded him the very first Silver Medal in Engineering Acoustics in 1974 and the Gold Medal in 1981. He won the IEEE Lamme Medal in 1970, was elected to the National Academy of Sciences in 1959, and was the recipient of many honorary degrees during his lifetime. Olson retired from RCA in 1967, continuing as a consultant for RCA Laboratories.

High Fidelity Demonstration Shortly after World War II, Dr. Olson conducted an experiment, now considered a classic, to determine the preferred bandwidth for the reproduction of music. Previous experimenters had found that listeners seemed to prefer a high-frequency cutoff of 5000 Hz for reproduced music. Dr. Olson suspected that this was likely due to imperfections in the sound, especially in the higher frequencies, as reproduced by equipment in common use at the time. These imperfections included clicks and pops (from 78 rpm recordings), added noise (from AM radio broadcast static), hiss and harmonic distortion (from amplifier circuits), and non linear frequency response from primitive loudspeaker designs. If the sound was free of these problems, he reasoned, listeners would prefer full frequency reproduction. In his experiment, he set up a room which was divided diagonally by a visually opaque but acoustically transparent screen. The screen incorporated a concealed low-pass acoustical filter having an upper frequency cutoff of 5000 Hz. This filter could be opened or closed, allowing either the full range of frequencies to pass or the range only below 5000 Hz. At first, a small orchestra sat and performed on one side of the screen, while a group of test subjects sat on the other and listened. The listeners were asked to select their preference between two conditions: full bandwidth or restricted bandwidth. There was overwhelming preference in favor of the full bandwidth. Next, the orchestra was replaced with a sound-reproduction system with loudspeakers positioned behind the screen instead. When the sound system was free of distortion, the listeners preferred the full bandwidth. But when he introduced small amounts of nonlinear distortion, the subjects preferred a restricted bandwidth, thus demonstrating clearly the importance of high quality in audio systems. As a result of this experiment and the work of others, such as Avery Fisher and later Edgar Villchur, high fidelity sound recording, transmission, and reproduction equipment saw increased investment, development, and public acceptance in the following decades. The design and manufacture of everything from microphones, to tape recorders, vinyl records, amplifiers, and loudspeakers were impacted.

Influence on High-Quality Modern PA Systems The Grateful Dead's early sound engineering team, led by Owsley Stanley and Dan Healy, considered Harry Olson's 1957 book "Acoustical Engineering" the Dead's "bible" on building the Wall of Sound (Grateful Dead), the first touring sound system that allowed a band to actually hear themselves and have the audience hear what the band was hearing on stage. The band made copies of the book for all of the Dead's sound crew. The Wall of Sound influenced all modern high-quality PA systems for live music.

Personal life

… excerpt ends here. Continue reading the full article.

Illustrations

Harry F. Olson: Iconic microphone image based on the design of the RCA Type 77-A microphone
Iconic microphone image based on the design of the RCA Type 77-A microphone

Worked examples

Example 1 — a first encounter with Harry F. Olson

Start with the simplest possible case. Write down what Harry F. Olson claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Harry F. Olson before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Harry F. Olson ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Harry F. Olson

In research
Harry F. Olson appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Harry F. Olson in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Harry F. Olson is common in secondary-school and first-year university syllabi. It links to neighbouring topics 1901 births, 1982 deaths, 20th-century American engineers, so understanding it makes those chapters shorter.
In everyday life
Look for Harry F. Olson outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Harry F. Olson” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Harry F. Olson in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Harry F. Olson means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Harry F. Olson out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Harry F. Olson in simple terms?

Dr Harry Ferdinand Olson, E.E., Ph.D. (December 28, 1901 – April 1, 1982) was a prominent engineer and inventor with RCA Victor, the Acoustic Research Director of RCA Laboratories, Princeton, and a pioneer in the field of 20th century acoustical engineering notably in the fields of high-fidelity, d…

Why does Harry F. Olson matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Harry F. Olson?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Harry F. Olson.

Tags

  • 1901 births
  • 1982 deaths
  • 20th-century American engineers
  • 20th-century American inventors
  • ASA Gold Medal recipients
  • American acoustical engineers
  • American people of Swedish descent
  • Engineers from Iowa
  • Fellows of the American Physical Society
  • IEEE Lamme Medal recipients
  • Members of the United States National Academy of Sciences

Keep exploring