ArticleslgStudy

engineering

Historic Mill of Sanssouci

Historic Mill of Sanssouci is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Historic Mill of Sanssouci rather than just read about it. In short: The Historic Mill of Sanssouci is a windmill located in Potsdam, Germany, featured in the legend of The Miller of Sanssouci (German: Der Müller von Sanssouci). It is particularly associated with Frederick the Great and his summer palace of Sanssouci.

Historic Mill of Sanssouci — main illustration
Historic Mill of Sanssouci — illustration

Key takeaways

  • Historic Mill of Sanssouci belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Historic Mill of Sanssouci to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Historic Mill of Sanssouci from memory before moving on to harder problems.

Reference excerpt

The Historic Mill of Sanssouci is a windmill located in Potsdam, Germany, featured in the legend of The Miller of Sanssouci (German: Der Müller von Sanssouci). It is particularly associated with Frederick the Great and his summer palace of Sanssouci.

History of the Mill In 1736 the soldier king, Frederick William I of Prussia, gave permission for the construction of a windmill, which was started in 1737. This first windmill, completed in 1738, was a post mill, whose entire superstructure, supported on a wooden post, was turned "into the wind" depending on the wind direction. The first mill and actual Historic Mill was thus older than the nearby summer palace, built in the years 1745 to 1747 for Frederick the Great. A half-century later the, by now dilapidated, post mill had to be demolished. The construction of a new mill, between 1787 and 1791, was financed by Frederick William II, because the mill had become famous far beyond the city of Potsdam as the result of a legend. The task was given to the master builder, Cornelius Wilhelm van der Bosch, who erected a bigger smock mill based on the Dutch prototype in place of the post mill. Following the accession of Frederick William IV in 1840, the landscape architect, Peter Joseph Lenné, smartened up the area around the mill. In connexion with this, a triumphal way was planned by the king, in honour of Frederick the Great, but it was only partially realised. It was intended to incorporate the Historic Mill into this project as the road was to run from the Gate of Triumph, east of Sanssouci Park, and run past the newly built Orangery Palace to the Belvedere on the Klausberg. The March Revolution of 1848 and a lack of finance, however, meant that this grand project came to nothing. In 1858 the last miller finished his tenancy. Because the king refused to allow other applicants to run the mill, the building became open to visitors in 1861. At the end of the Second World War, on 27 April 1945, a Soviet tank was hit by a panzerfaust between the mill and the drive up to Sanssouci Palace. In the battle that followed the mill and the Swiss house at its foot were set ablaze. Both buildings were destroyed, but the Swiss house (Schweizerhaus) was not rebuilt.

Reconstruction of the Historic Mill

In 1983 the Potsdam Chamber of Commerce began the restoration of the stone base. This work had to be stopped in 1990 due to financial difficulties. At the end of 1991, the rebuilding work was able to start again thanks to donations from the state of Brandenburg, the North Rhine-Westphalia Foundation and the then Potsdam-Sanssouci Foundation of Prussian Palaces and Gardens. The present smock mill is a replica of the one built from 1787 to 1791 and the third so-called Historic Mill. It had to be planned from photographs and measurements of the mill foundations, because the construction drawings by Cornelius Wilhelm van der Bosch were no longer available. The mill is owned by the Berlin-Brandenburg Foundation for Prussian Palaces and Gardens (Stiftung Preußische Schlösser and Gärten Berlin-Brandenburg). It has been operated since 1995 by the Berlin-Brandenburg Mill Association, founded in 1990. Since 1984 a replica of the Historic Mill of Sanssouci in Potsdam has stood in the open land of the Gifhorn Mill Museum.

Technical data

The design reflects construction methods around the year 1800, its technical equipment in part that of the turn of the 19th century. Mill design: Octagonal post, mill cap, mill technical features like the 5.5 metre long sail axle. The mill has a height of 25.78 metres and, up to the upper edge of the sail, 35.45 metres. Breakdown:

Stone pedestal: 13.41 metres. Wooden smock: 12.37 metres. Length of the rods (Segelgatterflügel): each 12 metres.

Legend As recorded by historian Franz Theodor Kugler in 1856, the legend goes that Frederick the Great was being disturbed by the clatter of the mill sails and offered to buy the mill from its miller, Johann William Grävenitz. When he refused, the king is supposed to have threatened:

"Does he not know that I can take the mill away from him by virtue of my royal power without paying one groschen for it?" Whereupon the miller is supposed to have replied:

"Of course, your majesty, your majesty could easily do that, if – begging your pardon – it were not for the Supreme Court in Berlin."

This is only a legend. According to Frederick the Great the mill underscored the rural character of his summer palace and said "that, ... the mill is an ornament for the palace." The miller was reportedly a difficult man, who cheated the local farmers over their flour and constantly pestered the king with petitions. At least one of these petitions was heard by Frederick II. Grävenitz pointed to the fact that, as a result of the construction of the palace, the post mill no longer stood in the open, but was partly shielded from the wind. So he demanded that the king let him build the mill in another site and to pay him for it. Frederick II acceded to this, with the result that, shortly thereafter, the wily Grävenitz was the proud possessor of two mills thanks to the king's grace, until he eventually resold the old mill.

In 1768 there was a legal dispute at another location over water rights and the remaining lease between Christian Arnold, the tenant of a mill in Pommerzig in the Neumark, and his landlord, the Count of Schmettau. After the miller was found guilty on two accounts, he appealed to Frederick the Great, who intervened in the ongoing proceedings in favour of the miller. Wrongly, as it turned out later. The king referred the case to the Berlin Court of Appeal, who once again ruled against the miller. Frederick the Great, then demanded a condemnation of the judges and their imprisonment in Spandau Citadel for their unjust judgments and thus precipitated an abuse of his name. This legal battle and the story of the Sanssouci miller were woven together in the legend and were intended to emphasize the king's justice towards all his subjects. After the death of Frederick the Great, the case was reopened. His nephew and successor, Frederick William II decided in a compromise that:

… excerpt ends here. Continue reading the full article.

Illustrations

Historic Mill of Sanssouci: Historic Mill of Sanssouci
Historic Mill of Sanssouci
Historic Mill of Sanssouci: Around 1900
Around 1900
Historic Mill of Sanssouci: The mill around 1900
The mill around 1900
Historic Mill of Sanssouci: Historic Mill – view from below
Historic Mill – view from below
Historic Mill of Sanssouci: The mill in June 2009
The mill in June 2009

Worked examples

Example 1 — a first encounter with Historic Mill of Sanssouci

Start with the simplest possible case. Write down what Historic Mill of Sanssouci claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Historic Mill of Sanssouci before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Historic Mill of Sanssouci ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Historic Mill of Sanssouci

In research
Historic Mill of Sanssouci appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Historic Mill of Sanssouci in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Historic Mill of Sanssouci is common in secondary-school and first-year university syllabi. It links to neighbouring topics 1738 establishments in the Holy Roman Empire, Buildings and structures completed in 1738, Buildings and structures in Germany destroyed during World War II, so understanding it makes those chapters shorter.
In everyday life
Look for Historic Mill of Sanssouci outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Historic Mill of Sanssouci” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Historic Mill of Sanssouci in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Historic Mill of Sanssouci means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Historic Mill of Sanssouci out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Historic Mill of Sanssouci in simple terms?

The Historic Mill of Sanssouci is a windmill located in Potsdam, Germany, featured in the legend of The Miller of Sanssouci (German: Der Müller von Sanssouci). It is particularly associated with Frederick the Great and his summer palace of Sanssouci.

Why does Historic Mill of Sanssouci matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Historic Mill of Sanssouci?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Historic Mill of Sanssouci.

Tags

  • 1738 establishments in the Holy Roman Empire
  • Buildings and structures completed in 1738
  • Buildings and structures in Germany destroyed during World War II
  • Frederick William I of Prussia
  • Frederick the Great
  • Mill museums in Germany
  • Museums in Potsdam
  • Rebuilt buildings and structures in Potsdam
  • Sanssouci Park
  • Windmills in Germany
  • Wooden buildings and structures in Germany

Keep exploring