History of radio receivers

Radio waves were first identified in German physicist Heinrich Hertz's 1887 series of experiments to prove James Clerk Maxwell's electromagnetic theory. Hertz used spark-excited dipole antennas to generate the waves and micrometer spark gaps attached to dipole and loop antennas to detect them. These precursor radio receivers were primitive devices, more accurately described as radio wave "sensors" or "detectors", as they could only receive radio waves within about 100 feet of the transmitter, and were not used for communication but instead as laboratory instruments in scientific experiments and engineering demonstrations.

Spark era

The first radio transmitters, used during the initial three decades of radio from 1887 to 1917, a period called the spark era, were spark gap transmitters which generated radio waves by discharging a capacitance through an electric spark. Each spark produced a transient pulse of radio waves which decreased rapidly to zero. These damped waves could not be modulated to carry sound, as in modern AM and FM transmission. So spark transmitters could not transmit sound, and instead transmitted information by radiotelegraphy. The transmitter was switched on and off rapidly by the operator using a telegraph key, creating different length pulses of damped radio waves ("dots" and "dashes") to spell out text messages in Morse code. Therefore, the first radio receivers did not have to extract an audio signal from the radio wave like modern receivers, but just detected the presence of the radio signal, and produced a sound during the "dots" and "dashes". The device which did this was called a "detector". Since there were no amplifying devices at this time, the sensitivity of the receiver mostly depended on the detector. Many different detector devices were tried. Radio receivers during the spark era consisted of these parts:

An antenna, to intercept the radio waves and convert them to tiny radio frequency electric currents. A tuned circuit, consisting of a capacitor connected to a coil of wire, which acted as a bandpass filter to select the desired signal out of all the signals picked up by the antenna. Either the capacitor or coil was adjustable to tune the receiver to the frequency of different transmitters. The earliest receivers, before 1897, did not have tuned circuits, they responded to all radio signals picked up by their antennas, so they had little frequency-discriminating ability and received any transmitter in their vicinity. Most receivers used a pair of tuned circuits with their coils magnetically coupled, called a resonant transformer (oscillation transformer) or "loose coupler". A detector, which produced a pulse of DC current for each damped wave received. An indicating device such as an earphone, which converted the pulses of current into sound waves. The first receivers used an electric bell instead. Later receivers in commercial wireless systems used a Morse siphon recorder, which consisted of an ink pen mounted on a needle swung by an electromagnet (a galvanometer) which drew a line on a moving paper tape. Each string of damped waves constituting a Morse "dot" or "dash" caused the needle to swing over, creating a displacement of the line, which could be read off the tape. With such an automated receiver a radio operator did not have to continuously monitor the receiver. The signal from the spark gap transmitter consisted of damped waves repeated at an audio frequency rate, from 120 to perhaps 4000 per second, so in the earphone the signal sounded like a musical tone or buzz, and the Morse code "dots" and "dashes" sounded like beeps. The first radio wave based communication system was a wireless telegraphy system developed by Guglielmo Marconi, beginning in 1894–5. In 1894 English physicist Oliver Lodge had laid out the basic techniques of radio detection in his demonstrations on Hertz's discovery. Within a year Marconi and Russian physicist Alexander Popov were building receivers based on Lodge's techniques. Lodge's focus was a scientific demonstration of the quasi optical nature of "Hertzian waves" and Popov was constructing a radio based early warning lightning detector for the forest service so Marconi is usually given credit for building the first radio receiver used for communication.

Coherer receiver

… excerpt ends here. Continue reading the full article.