ArticleslgStudy

chemistry

Hitting the wall

Hitting the wall is a chemistry topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Hitting the wall rather than just read about it. In short: In endurance sports such as road cycling and long-distance running, hitting the wall or the bonk is a condition of sudden fatigue and loss of energy which is caused by the depletion of glycogen stores in the liver and muscles. Milder instances can be remedied by brief rest and the ingestion of food or drinks containing carbohydrates.

Hitting the wall — main illustration
Hitting the wall — illustration

Key takeaways

  • Hitting the wall belongs to chemistry; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Hitting the wall to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Hitting the wall from memory before moving on to harder problems.

Reference excerpt

In endurance sports such as road cycling and long-distance running, hitting the wall or the bonk is a condition of sudden fatigue and loss of energy which is caused by the depletion of glycogen stores in the liver and muscles. Milder instances can be remedied by brief rest and the ingestion of food or drinks containing carbohydrates. Otherwise, it can be remedied by attaining second wind by either resting for approximately 10 minutes or by slowing down considerably and increasing speed slowly over a period of 10 minutes. Ten minutes is approximately the time that it takes for free fatty acids to sufficiently produce ATP in response to increased demand. During a marathon, for instance, runners typically hit the wall around kilometer 30 (mile 20). The condition can usually be avoided by ensuring that glycogen levels are high when the exercise begins, maintaining glucose levels during exercise by eating or drinking carbohydrate-rich substances, or by reducing exercise intensity.

Biology Skeletal muscle relies predominantly on glycogenolysis for the first few minutes as it transitions from rest to activity, as well as throughout high-intensity aerobic activity and all anaerobic activity. The lack of glycogen causes a low ATP reservoir within the exercising muscle cells. Until second wind is achieved (increased ATP production primarily from free fatty acids), the symptoms of a low ATP reservoir in exercising muscle due to depleted glycogen include: muscle fatigue, muscle cramping, muscle pain (myalgia), inappropriate rapid heart rate response to exercise (tachycardia), breathlessness (dyspnea) or rapid breathing (tachypnea), exaggerated cardiorespiratory response to exercise (tachycardia & dyspnea/tachypnea). The heart tries to compensate for the energy shortage by increasing heart rate to maximize delivery of oxygen and blood borne fuels to the muscle cells for oxidative phosphorylation. Without muscle glycogen, it is important to get into second wind without going too fast, too soon nor trying to push through the pain. Going too fast, too soon encourages protein metabolism over fat metabolism, and the muscle pain in this circumstance is a result of muscle damage due to a severely low ATP reservoir. Protein metabolism occurs through amino acid degradation which converts amino acids into pyruvate, the breakdown of protein to maintain the amino acid pool, the myokinase (adenylate kinase) reaction and purine nucleotide cycle. Amino acids are vital to the purine nucleotide cycle as they are precursors for purines, nucleotides, and nucleosides; as well as branch-chained amino acids are converted into glutamate and aspartate for use in the cycle (see Aspartate and glutamate synthesis). Severe breakdown of muscle leads to rhabdomyolysis and myoglobinuria. Excessive use of the myokinase reaction and purine nucleotide cycle leads to myogenic hyperuricemia. In muscle glycogenoses (muscle GSDs), an inborn error of carbohydrate metabolism impairs either the formation or utilization of muscle glycogen. As such, those with muscle glycogenoses do not need to do prolonged exercise to experience hitting the wall. Instead, signs of exercise intolerance, such as an inappropriate rapid heart rate response to exercise, are experienced from the beginning of activity.

Etymology, usage, and synonyms The term bonk for fatigue is presumably derived from the original meaning "to hit", and dates back at least half a century. Its earliest citation in the Oxford English Dictionary is a 1952 article in the Daily Mail. The term is used colloquially as a noun ("hitting the bonk") and as a verb ("to bonk halfway through the race"). The condition is also known to long-distance (marathon) runners, who usually refer to it as "hitting the wall". The British may refer to it as "hunger knock," while "hunger bonk" was used by South African cyclists in the 1960s. It can also be referred to as "blowing up" or a "weak attack".

In other languages In German, hitting the wall is known as "der Mann mit dem Hammer" ("the man with the hammer"); the phenomenon is thus likened to a man with the hammer coming after the athlete, catching up, and eventually hitting the athlete, causing a sudden drop in performance. In French, marathoners in particular use "frapper le mur (du marathon)", literally hitting the (marathon) wall. One may also hear "avoir un coup de barre" (getting smacked by a bar), which means experiencing sudden, incredible fatigue. This expression is used in a wider set of contexts.

Mechanisms Athletes engaged in exercise over a long period of time produce energy via two mechanisms, both facilitated by oxygen:

via fat metabolism and via breakdown of glycogen into glucose-1-phosphate, followed by glycolysis. How much energy comes from either source depends on the intensity of the exercise. During intense exercise that approaches one's VO2 max, most of the energy comes from glycogen. A typical untrained individual on an average diet is able to store about 380 grams of glycogen, or 1500 kcal, in the body, though much of that amount is spread throughout the muscular system and may not be available for any specific type of exercise. Intense cycling or running can easily consume 600–800 or more kcal per hour. Unless glycogen stores are replenished during exercise, glycogen stores in such an individual will be depleted after less than 2 hours of continuous cycling or 15 miles (24 km) of running. Training and carbohydrate loading can raise these reserves as high as 880 g (3600 kcal), correspondingly raising the potential for uninterrupted exercise.

Effects In one study of five male subjects, "reduction in preexercise muscle glycogen from 59.1 to 17.1 μmol × g−1 (n = 3) was associated with a 14% reduction in maximum power output but no change in maximum O2 intake; at any given power output O2 intake, heart rate, and ventilation (VE) were significantly higher, CO2 output (VCO2) was similar, and the respiratory exchange ratio was lower during glycogen depletion compared with control." Five is an extremely small sample size, so this study may not be representative of the general population.

Avoidance There are several approaches to prevent glycogen depletion:

… excerpt ends here. Continue reading the full article.

Illustrations

Hitting the wall: Statue of the "Tired Man" (Megfáradt ember in Hungarian), referring to the poem of Attila József. The statue is the work of József Somogyi.
Statue of the "Tired Man" (Megfáradt ember in Hungarian), referring to the poem of Attila József. The statue is the work of József Somogyi.

Worked examples

Example 1 — a first encounter with Hitting the wall

Start with the simplest possible case. Write down what Hitting the wall claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In chemistry, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Hitting the wall before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Hitting the wall ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Hitting the wall

In research
Hitting the wall appears in chemistry research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Hitting the wall in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Hitting the wall is common in secondary-school and first-year university syllabi. It links to neighbouring topics Endurance games, Exercise biochemistry, Sports terminology, so understanding it makes those chapters shorter.
In everyday life
Look for Hitting the wall outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Hitting the wall” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Hitting the wall in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Hitting the wall means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Hitting the wall out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Hitting the wall in simple terms?

In endurance sports such as road cycling and long-distance running, hitting the wall or the bonk is a condition of sudden fatigue and loss of energy which is caused by the depletion of glycogen stores in the liver and muscles. Milder instances can be remedied by brief rest and the ingestion of food…

Why does Hitting the wall matter?

Because it connects several chemistry ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Hitting the wall?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Hitting the wall.

Tags

  • Endurance games
  • Exercise biochemistry
  • Sports terminology

Keep exploring