Hydrogen peroxide is a chemical compound with the formula H2O2. In its pure form, it is a very pale blue liquid; however, at lower concentrations, it appears colorless due to the faintness of the blue coloration. The molecule hydrogen peroxide is asymmetrical and highly polarized. Its strong tendency to form hydrogen bond networks results in greater viscosity compared to water. It is used as an oxidizer, bleaching agent, and antiseptic, usually as a dilute solution (3%–6% by weight) in water for consumer use and in higher concentrations for industrial use. Concentrated hydrogen peroxide, or "high-test peroxide", decomposes explosively when heated and has been used as both a monopropellant and an oxidizer in rocketry. Hydrogen peroxide is a reactive oxygen species and the simplest peroxide, a compound having an oxygen–oxygen single bond. It decomposes slowly into water and elemental oxygen when exposed to light, and rapidly in the presence of organic or reactive compounds. It is typically stored with a stabilizer in a weakly acidic solution in an opaque bottle. Hydrogen peroxide is found in biological systems including the human body. Enzymes that use or decompose hydrogen peroxide are classified as peroxidases.
Properties The boiling point of H2O2 has been extrapolated as being 150.2 °C (302.4 °F), approximately 50 °C (90 °F) higher than water. In practice, hydrogen peroxide will undergo potentially explosive thermal decomposition if heated to this temperature. It may be safely distilled at lower temperatures under reduced pressure. Hydrogen peroxide forms stable adducts with urea (hydrogen peroxide–urea), sodium carbonate (sodium percarbonate) and other compounds. Stable hydrogen-bonded adducts with various amine oxides and substituted phosphine oxides are known. The adduct with triphenylphosphine oxide can serve as a "carrier" for H2O2 in some reactions, although triphenylphosphine oxide can also catalyze the decomposition of hydrogen peroxide.
Structure
Hydrogen peroxide (H2O2) is a nonplanar molecule with (twisted) C2 symmetry; this was first shown by Paul-Antoine Giguère in 1950 using infrared spectroscopy. Although the O−O bond is a single bond, the molecule has a relatively high energy barrier of 386 cm−1 (4.62 kJ/mol) for rotation between enantiomers via the anti configuration, and 2460 cm−1 (29.4 kJ/mol) via the eclipsed configuration. These barriers are proposed to be due to repulsion between the lone pairs of the adjacent oxygen atoms and dipolar effects between the two O–H bonds. For comparison, the rotational barrier for ethane is 1040 cm−1 (12.4 kJ/mol). The approximately 100° dihedral angle between the two O–H bonds makes the molecule chiral. It is the smallest and simplest molecule to exhibit enantiomerism. It has been proposed that the enantiospecific interactions of one rather than the other may have led to amplification of one enantiomeric form of ribonucleic acids and therefore an origin of homochirality in an RNA world. The molecular structures of gaseous and crystalline H2O2 are significantly different. This difference is attributed to the effects of hydrogen bonding, which is absent in the gaseous state. Crystals of H2O2 are tetragonal with the space group D44 or P41212.
Aqueous solutions In aqueous solutions, hydrogen peroxide forms a eutectic mixture, exhibiting freezing-point depression down as low as −56 °C under atmospheric pressure; pure water has a freezing point of 0 °C and pure hydrogen peroxide of −0.43 °C. The boiling point of the same mixtures is also depressed in relation with the mean of both boiling points (125.1 °C). It occurs at 114 °C. This boiling point is 14 °C greater than that of pure water and 36.2 °C less than that of pure hydrogen peroxide.
Hydrogen peroxide is most commonly available as a solution in water. For consumers, it is usually available from pharmacies at 3 and 6 wt% concentrations. The concentrations are sometimes described in terms of the volume of oxygen gas generated; one milliliter of a 20-volume solution generates twenty milliliters of oxygen gas when completely decomposed. For laboratory use, 30 wt% solutions are most common. Commercial grades from 70% to 98% are also available, but due to the potential of solutions of more than 68% hydrogen peroxide to be converted entirely to steam and oxygen (with the temperature of the steam increasing as the concentration increases above 68%) these grades are potentially far more hazardous and require special care in dedicated storage areas. Buyers must typically allow inspection by commercial manufacturers.
Comparison with analogues Hydrogen peroxide has several structural analogues with HmX−XHn bonding arrangements (water also shown for comparison). It has the highest (theoretical) boiling point of this series (X = O, S, N, P). Its melting point is also fairly high, being comparable to that of hydrazine and water, with only hydroxylamine crystallising significantly more readily, indicative of particularly strong hydrogen bonding. Diphosphane and hydrogen disulfide exhibit only weak hydrogen bonding and have little chemical similarity to hydrogen peroxide. Structurally, the analogues all adopt similar skewed structures, due to repulsion between adjacent lone pairs.
Natural occurrence Hydrogen peroxide is produced by various biological processes mediated by enzymes. Hydrogen peroxide has been detected in surface water, in groundwater, and in the atmosphere. It can also form when water is exposed to UV light. Sea water contains 0.5 to 14 μg/L of hydrogen peroxide, and freshwater contains 1 to 30 μg/L. Concentrations in air are about 0.4 to 4 μg/m3, varying over several orders of magnitude depending in conditions such as season, altitude, daylight and water vapor content. In rural nighttime air it is less than 0.014 μg/m3, and in moderate photochemical smog it is 14 to 42 μg/m3. The amount of hydrogen peroxide in biological systems can be assayed using a fluorometric assay.
… excerpt ends here. Continue reading the full article.
