An ideal solid surface is flat, rigid, perfectly smooth, and chemically homogeneous, and has zero contact angle hysteresis. Zero hysteresis implies the advancing and receding contact angles are equal.
In other words, only one thermodynamically stable contact angle exists. When a drop of liquid is placed on such a surface, the characteristic contact angle is formed as depicted in Fig. 1. Furthermore, on an ideal surface, the drop will return to its original shape if it is disturbed. The following derivations apply only to ideal solid surfaces; they are only valid for the state in which the interfaces are not moving and the phase boundary line exists in equilibrium.
Minimization of energy, three phases
Figure 3 shows the line of contact where three phases meet. In equilibrium, the net force per unit length acting along the boundary line between the three phases must be zero. The components of net force in the direction along each of the interfaces are given by:
γ α θ + γ θ β cos θ + γ α β cos α = 0 {\displaystyle \gamma _{\alpha \theta }+\gamma _{\theta \beta }\cos {\theta }+\gamma _{\alpha \beta }\cos {\alpha }\ =0}
γ α θ cos θ + γ θ β + γ α β cos β = 0 {\displaystyle \gamma _{\alpha \theta }\cos {\theta }+\gamma _{\theta \beta }+\gamma _{\alpha \beta }\cos {\beta }\ =0}
γ α θ cos α + γ θ β cos β + γ α β = 0 {\displaystyle \gamma _{\alpha \theta }\cos {\alpha }+\gamma _{\theta \beta }\cos {\beta }+\gamma _{\alpha \beta }\ =0}
where α, β, and θ are the angles shown and γij is the surface energy between the two indicated phases. These relations can also be expressed by an analog to a triangle known as Neumann’s triangle, shown in Figure 4. Neumann’s triangle is consistent with the geometrical restriction that α + β + θ = 2 π {\displaystyle \alpha +\beta +\theta =2\pi } , and applying the law of sines and law of cosines to it produce relations that describe how the interfacial angles depend on the ratios of surface energies. Because these three surface energies form the sides of a triangle, they are constrained by the triangle inequalities, γij < γjk + γik meaning that no one of the surface tensions can exceed the sum of the other two. If three fluids with surface energies that do not follow these inequalities are brought into contact, no equilibrium configuration consistent with Figure 3 will exist.
Simplification to planar geometry, Young's relation If the β phase is replaced by a flat rigid surface, as shown in Figure 5, then β = π, and the second net force equation simplifies to the Young equation,
γ S G = γ S L + γ L G cos θ {\displaystyle \gamma _{SG}\ =\gamma _{SL}+\gamma _{LG}\cos {\theta }}
which relates the surface tensions between the three phases: solid, liquid and gas. Subsequently, this predicts the contact angle of a liquid droplet on a solid surface from knowledge of the three surface energies involved. This equation also applies if the "gas" phase is another liquid, immiscible with the droplet of the first "liquid" phase.
Real smooth surfaces and the Young contact angle The Young equation assumes a perfectly flat and rigid surface. In many cases, surfaces are far from this ideal situation, and two are considered here: the case of rough surfaces and the case of smooth surfaces that are still real (finitely rigid). Even in a perfectly smooth surface, a drop will assume a wide spectrum of contact angles ranging from the so-called advancing contact angle, θ A {\displaystyle \theta _{\mathrm {A} }} , to the so-called receding contact angle, θ R {\displaystyle \theta _{\mathrm {R} }} . The equilibrium contact angle ( θ c {\displaystyle \theta _{\mathrm {c} }} ) can be calculated from θ A {\displaystyle \theta _{\mathrm {A} }} and θ R {\displaystyle \theta _{\mathrm {R} }} as was shown by Tadmor as,
… excerpt ends here. Continue reading the full article.
