The imperial system of units, imperial system or imperial units (also known as British Imperial or Exchequer Standards of 1826) is the system of units first defined in the British Weights and Measures Act 1824 and continued to be developed through a series of Weights and Measures Acts and amendments. The imperial system developed from earlier English units as did the related but differing system of customary units of the United States. The imperial units replaced the Winchester Standards, which were in effect from 1588 to 1825. The system came into official use across the British Empire in 1826. By the late 20th century, most nations of the former empire had officially adopted the metric system as their main system of measurement, but imperial units are still used alongside metric units in the United Kingdom and in some other parts of the former empire, notably Canada. The modern UK legislation defining the imperial system of units is given in the Weights and Measures Act 1985 (as amended).
Implementation The Weights and Measures Act 1824 was initially scheduled to go into effect on 1 May 1825. The Weights and Measures Act 1825 pushed back the date to 1 January 1826. The 1824 act allowed the continued use of pre-imperial units provided that they were customary, widely known, and clearly marked with imperial equivalents.
Apothecaries' units
Apothecaries' units are not mentioned in the acts of 1824 and 1825. At the time, apothecaries' weights and measures were regulated "in England, Wales, and Berwick-upon-Tweed" by the London College of Physicians, and in Ireland by the Dublin College of Physicians. In Scotland, apothecaries' units were unofficially regulated by the Edinburgh College of Physicians. The three colleges published, at infrequent intervals, pharmacopoeias, the London and Dublin editions having the force of law. Imperial apothecaries' measures, based on the imperial pint of 20 fluid ounces, were introduced by the publication of the London Pharmacopoeia of 1836, the Edinburgh Pharmacopoeia of 1839, and the Dublin Pharmacopoeia of 1850. The Medical Act 1858 transferred to the Crown the right to publish the official pharmacopoeia and to regulate apothecaries' weights and measures.
Units
Length Metric equivalents in this article usually assume the latest official definition. Previously, the most precise measurement of the imperial Standard Yard was 0.914398415 metres.
Area
Volume
The Weights and Measures Act 1824 invalidated the various different gallons in use in the British Empire, declaring them to be replaced by the statute gallon (which became known as the imperial gallon), a unit close in volume to the ale gallon. The 1824 act defined as the volume of a gallon to be that of 10 pounds (4.54 kg) of distilled water weighed in air with brass weights with the barometer standing at 30 inches of mercury (102 kPa) at a temperature of 62 °F (17 °C). The 1824 act went on to give this volume as 277.274 cubic inches (4.54371 litres). The Weights and Measures Act 1963 refined this definition to be the volume of 10 pounds of distilled water of density 0.998859 g/mL weighed in air of density 0.001217 g/mL against weights of density 8.136 g/mL, which works out to 4.546092 L. The Weights and Measures Act 1985 defined a gallon to be exactly 4.54609 L (approximately 277.4194 cu in).
British apothecaries' volume measures These measurements were in use from 1826, when the new imperial gallon was defined. For pharmaceutical purposes, they were replaced by the metric system in the United Kingdom on 1 January 1971. In the US, though no longer recommended, the apothecaries' system is still used occasionally in medicine, especially in prescriptions for older medications.
Mass and weight In the 19th and 20th centuries, the UK used three different systems for mass and weight.
troy weight, used for precious metals; avoirdupois weight, used for most other purposes; and apothecaries' weight, used by physicians and apothecaries for medical prescriptions The distinction between mass and weight is not always clearly drawn. Strictly a pound is a unit of mass, but it is commonly referred to as a weight. When a distinction is necessary, the term pound-force may refer to a unit of force rather than mass. The troy pound (373.2417216 g) was made the primary unit of mass by the Weights and Measures Act 1824 and its use was abolished in the UK on 1 January 1879, with only the troy ounce (31.1034768 g) and its decimal subdivisions retained. The Weights and Measures Act 1855 made the avoirdupois pound the primary unit of mass. In all the systems, the fundamental unit is the pound, and all other units are defined as fractions or multiples of it.
Natural equivalents The 1824 Act of Parliament defined the yard, pound and gallon by reference to the prototype standards, naming the prototypes the Imperial Standard Yard, the Imperial Standard Troy Pound and the Imperial Standard Gallon, and it also defined the values of certain physical constants, to make provision for re-creation of the standards if they were to be damaged. For the yard, the length of a pendulum beating seconds at the latitude of Greenwich at mean sea level in vacuo was defined as 39.1393 inches. For the pound, the mass of a cubic inch of distilled water at an atmospheric pressure of 30 inches of mercury and a temperature of 62° Fahrenheit was defined as 252.458 grains, with there being 7,000 grains per pound. Following the destruction of the original prototypes in the 1834 Houses of Parliament fire, it proved impossible to recreate the standards from these definitions, and a new Weights and Measures Act 1855 was passed which permitted the recreation of the prototypes from recognized secondary standards.
Current use
United Kingdom
… excerpt ends here. Continue reading the full article.
