Bohrium (107Bh) is an artificial element. Like all artificial elements, it has no stable isotopes, and a standard atomic weight cannot be given. The first isotope to be synthesized was 262Bh in 1981. There are 11 known isotopes ranging from 260Bh to 274Bh, and 1 isomer, 262mBh. The longest-lived isotope is 270Bh with a half-life of 2.4 minutes, although the unconfirmed 278Bh may have an even longer half-life of about 11.5 minutes.
List of isotopes
Nucleosynthesis Superheavy elements such as bohrium are produced by bombarding lighter elements in particle accelerators that induce fusion reactions. Whereas most of the isotopes of bohrium can be synthesized directly this way, some heavier ones have only been observed as decay products of elements with higher atomic numbers. Depending on the energies involved, the former are separated into "hot" and "cold". In hot fusion reactions, very light, high-energy projectiles are accelerated toward very heavy targets (actinides), giving rise to compound nuclei at high excitation energy (~40–50−MeV) that may either fission or evaporate several (3 to 5) neutrons. In cold fusion reactions, the produced fused nuclei have a relatively low excitation energy (~10–20 MeV), which decreases the probability that these products will undergo fission. As the fused nuclei cool to the ground state, they require emission of only one or two neutrons, thus allowing for the generation of more neutron-rich products. The latter is a distinct concept from that of where nuclear fusion claimed to be achieved at room temperature conditions (see cold fusion). The table below contains various combinations of targets and projectiles which could be used to form compound nuclei with Z = 107.
Cold fusion Before the first successful synthesis of hassium in 1981 by the GSI team, the synthesis of bohrium was first attempted in 1976 by scientists at the Joint Institute for Nuclear Research at Dubna using this cold fusion reaction. They detected two spontaneous fission activities, one with a half-life of 1–2 ms and one with a half-life of 5 s. Based on the results of other cold fusion reactions, they concluded that they were due to 261Bh and 257Db respectively. However, later evidence gave a much lower SF branching for 261Bh reducing confidence in this assignment. The assignment of the dubnium activity was later changed to 258Db, presuming that the decay of bohrium was missed. The 2 ms SF activity was assigned to 258Rf resulting from the 33% EC branch. The GSI team studied the reaction in 1981 in their discovery experiments. Five atoms of 262Bh were detected using the method of correlation of genetic parent-daughter decays. In 1987, an internal report from Dubna indicated that the team had been able to detect the spontaneous fission of 261Bh directly. The GSI team further studied the reaction in 1989 and discovered the new isotope 261Bh during the measurement of the 1n and 2n excitation functions but were unable to detect an SF branching for 261Bh. They continued their study in 2003 using newly developed bismuth(III) fluoride (BiF3) targets, used to provide further data on the decay data for 262Bh and the daughter 258Db. The 1n excitation function was remeasured in 2005 by the team at the Lawrence Berkeley National Laboratory (LBNL) after some doubt about the accuracy of previous data. They observed 18 atoms of 262Bh and 3 atoms of 261Bh and confirmed the two isomers of 262Bh. In 2007, the team at LBNL studied the analogous reaction with chromium-52 projectiles for the first time to search for the lightest bohrium isotope 260Bh:
20983Bi + 5224Cr → 260107Bh + n The team successfully detected 8 atoms of 260Bh decaying by alpha decay to 256Db, emitting alpha particles with energy 10.16 MeV. The alpha decay energy indicates the continued stabilizing effect of the N=152 closed shell. The team at Dubna also studied the reaction between lead-208 targets and manganese-55 projectiles in 1976 as part of their newly established cold fusion approach to new elements:
20882Pb + 5525Mn → 262107Bh + n They observed the same spontaneous fission activities as those observed in the reaction between bismuth-209 and chromium-54 and again assigned them to 261Bh and 257Db. Later evidence indicated that these should be reassigned to 258Db and 258Rf (see above). In 1983, they repeated the experiment using a new technique: measurement of alpha decay from a decay product that had been separated out chemically. The team were able to detect the alpha decay from a decay product of 262Bh, providing some evidence for the formation of bohrium nuclei. This reaction was later studied in detail using modern techniques by the team at LBNL. In 2005 they measured 33 decays of 262Bh and 2 atoms of 261Bh, providing an excitation function for the reaction emitting one neutron and some spectroscopic data of both 262Bh isomers. The excitation function for the reaction emitting two neutrons was further studied in a 2006 repeat of the reaction. The team found that the reaction emitting one neutron had a higher cross section than the corresponding reaction with a 209Bi target, contrary to expectations. Further research is required to understand the reasons.
Hot fusion The reaction between uranium-238 targets and phosphorus-31 projectiles was first studied in 2006 at the LBNL as part of their systematic study of fusion reactions using uranium-238 targets:
23892U + 3115P → 264107Bh + 5 n Results have not been published but preliminary results appear to indicate the observation of spontaneous fission, possibly from 264Bh. In 2004, the team at the Institute of Modern Physics (IMP), Lanzhou, have studied the nuclear reaction between americium-243 targets and accelerated nuclei of magnesium-26 in order to synthesise the new isotope 265Bh and gather more data on 266Bh:
24395Am + 2612Mg → 269−x107Bh + x n (x = 3, 4, or 5) In two series of experiments, the team measured partial excitation functions for the reactions emitting three, four, and five neutrons. The reaction between targets of curium-248 and accelerated nuclei of sodium-23 was studied for the first time in 2008 by the team at RIKEN, Japan, in order to study the decay properties of 266Bh, which is a decay product in their claimed decay chains of nihonium:
… excerpt ends here. Continue reading the full article.
