ArticleslgStudy

astronomy

Kepler-14

Kepler-14 is a astronomy topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Kepler-14 rather than just read about it. In short: Kepler-14 is a binary star system targeted by the Kepler spacecraft. It is host to one known planet: the Jupiter-like Kepler-14b.

Kepler-14 — main illustration
Kepler-14 — illustration

Key takeaways

  • Kepler-14 belongs to astronomy; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Kepler-14 to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Kepler-14 from memory before moving on to harder problems.

Reference excerpt

Kepler-14 is a binary star system targeted by the Kepler spacecraft. It is host to one known planet: the Jupiter-like Kepler-14b. The star system was identified by Kepler as a possible planetary host, but when imaging revealed that Kepler-14 was a binary star system and not a single star, the confirmation process became protracted. The stars are separated by at least 280 AU, and the stars complete an orbit around a common center of mass every 2800 years. Both stars are larger than the Sun. They are of similar absolute magnitudes; however, the primary star is brighter as seen from Earth.

Observational history

Kepler-14 was identified as a possible host to a planet during the first four months of Kepler's operational data, which began when NASA launched the satellite in April 2009. Kepler-14 was provisionally designated KOI-98. Because Kepler-14's transit signal seemed to imply that the possible planet had a short orbit and a clear effect on Kepler-14's brightness, the Kepler science team forwarded the candidate to the Kepler Follow-up Program (KFOP). KFOP used the Fibre-fed Échelle Spectrograph (FIES) on the Nordic Optical Telescope to measure Kepler-14's radial velocity in October 2009. Other radial velocity measurements were collected using W.M. Keck Observatory. The FIES and Keck data, combined with speckle imaging data from WIYN Observatory and near-infrared adaptive optics measurements at Palomar Observatory and the MMT Observatory, revealed that Kepler-14 was actually a close binary star, something that radial velocity data alone could not recognize. Because of this new discovery, further investigation of Kepler-14 was postponed until after the publishing of the first five new Kepler planets (the ones orbiting Kepler-4, Kepler-5, Kepler-6, Kepler-7, and Kepler-8). Analysis of the data revealed that, of the two-component stars in the Kepler-14 system, both stars are of nearly equal magnitude, although one of the stars was fainter. The brighter star was designated the "A" component, and the fainter star received the "B" designation. The transit signal was observed in orbit around the A component of the system, meaning that the planetary candidate would be in orbit of the primary star of Kepler-14. This was confirmed on August 7, 2010, when the Infrared Array Camera on the Spitzer Space Telescope observed Kepler-14 to gather photometric data. Analysis of both the Spitzer photometric data and the radial velocity data confirmed the idea of a planet as the source of the transit signal. The planet was designated Kepler-14b, and this was published alongside the data and research on Kepler-14 in a June 2011 paper. Kepler-14's nature as a close binary star was almost missed by the astronomers, and would not have been known if high-resolution imaging of the star had not been undertaken. The Kepler team acknowledged that a number of transiting planets' host stars may have actually been close visual binaries and that the assumed characteristics of the stars and their planets may be incorrect. As a result of their studies into Kepler-14, the Kepler team suggested the implementation of a high-resolution imaging campaign to re-examine transiting planet hosts, an effort that would require only a modest amount of telescope time.

Characteristics Kepler-14 is a binary star whose two components are separated by at least 280 astronomical units, or the distance between the Earth and Sun. The estimated orbital period of the Kepler-14 binary system is approximated at 2800 years. The two stars are of nearly equal brightness, but the primary component is slightly brighter as it has a more visible apparent magnitude, or its brightness as seen from Earth. The primary star has an estimated mass of 1.51 times that of the Sun, and the secondary has an estimated mass of 1.39 times the Sun's mass. The Kepler-14 system is 980 parsecs (3,196 light years) from Earth. It has an apparent magnitude of 12.12, and thus cannot be seen with the unaided eye. As a result of the fact that Kepler-14 is so close-knit as seen from Earth, it was impossible for the discovery team to separate the two stars and analyze their characteristics as separate stars. The Kepler team analyzed their characteristics under the assumption that Kepler-14 was a single star. If Kepler-14 were a single star, it would be an F-type star with a mass of 1.512 times the Sun's, and a size that is 2.048 times the Sun's radius. As a single star, the effective temperature of Kepler-14 would be 6395 K, much hotter than the Sun, and the star's iron content would be 0.12, or 132% the amount found in the Sun. Assuming that Kepler-14's two stars formed at about the same time, their gyrochronological ages would be approximately 2.2 billion years.

Planetary system

Kepler-14b is a Jupiter-like planet in the orbit of the primary star of Kepler-14. The planet is 8.4 times Jupiter's mass, the equivalent of 2670 times Earth's mass. The planet is slightly larger than Jupiter at 1.14 Jupiter radii The density of Kepler-14b is 7.1 g/cm3, the second densest planet confirmed by the Kepler spacecraft after Kepler-10b. Kepler-14b completes an orbit every 6.79 days with a slightly irregular orbit indicated by its orbital eccentricity of 0.035. Radial velocity measurements of host star did not reveal any additional planets as in 2018.

References

Illustrations

Kepler-14 illustration
Kepler-14: The Palomar Observatory confirmed findings suggesting that Kepler-14 was a binary star.
The Palomar Observatory confirmed findings suggesting that Kepler-14 was a binary star.

Worked examples

Example 1 — a first encounter with Kepler-14

Start with the simplest possible case. Write down what Kepler-14 claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In astronomy, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Kepler-14 before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Kepler-14 ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Kepler-14

In research
Kepler-14 appears in astronomy research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Kepler-14 in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Kepler-14 is common in secondary-school and first-year university syllabi. It links to neighbouring topics Binary stars, Kepler objects of interest, Lyra, so understanding it makes those chapters shorter.
In everyday life
Look for Kepler-14 outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Kepler-14 in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Kepler-14 means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Kepler-14 out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Kepler-14 in simple terms?

Kepler-14 is a binary star system targeted by the Kepler spacecraft. It is host to one known planet: the Jupiter-like Kepler-14b.

Why does Kepler-14 matter?

Because it connects several astronomy ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Kepler-14?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Kepler-14.

Tags

  • Binary stars
  • Kepler objects of interest
  • Lyra
  • Planetary systems with one confirmed planet
  • Planetary transit variables

Keep exploring