ArticleslgStudy

chemistry

Lawrencium

Lawrencium is a chemistry topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Lawrencium rather than just read about it. In short: Lawrencium is a synthetic chemical element; it has symbol Lr (formerly Lw) and atomic number 103. It is named after Ernest Lawrence, inventor of the cyclotron, a device used to discover many artificial radioactive elements.

Lawrencium — main illustration
Lawrencium — illustration

Key takeaways

  • Lawrencium belongs to chemistry; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Lawrencium to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Lawrencium from memory before moving on to harder problems.

Reference excerpt

Lawrencium is a synthetic chemical element; it has symbol Lr (formerly Lw) and atomic number 103. It is named after Ernest Lawrence, inventor of the cyclotron, a device used to discover many artificial radioactive elements. A radioactive metal, lawrencium is the eleventh transuranium element, the third transfermium, and the last member of the actinide series. Like all elements with atomic numbers over 100, lawrencium can only be produced in particle accelerators by bombarding lighter elements with charged particles. Fourteen isotopes of lawrencium are known; the most stable is 266Lr with half-life 11 hours, but the shorter-lived 260Lr (half-life 2.7 minutes) is most commonly used in chemistry because it can be produced on a larger scale. Chemistry experiments confirm that lawrencium behaves as a heavier homolog to lutetium in the periodic table, and is trivalent. It could thus also be classified as the first of the 7th-period transition metals. Its electron configuration is anomalous for its position in the periodic table, having an s2p configuration instead of the s2d configuration of its homolog lutetium. However, this does not appear to affect lawrencium's chemistry. In the 1950s, 1960s, and 1970s, many claims of synthesis of element 103 of varying quality were made by laboratories in the Soviet Union and the United States. The priority of the discovery and therefore the name of the element was disputed between Soviet and American scientists. The International Union of Pure and Applied Chemistry (IUPAC) initially established lawrencium as the official name for the element and gave the American team credit for the discovery; this was reevaluated in 1992, giving both teams shared credit for the discovery but not changing the element's name.

Introduction

History

In 1958, scientists at Lawrence Berkeley National Laboratory claimed the discovery of element 102, now called nobelium. At the same time, they also tried to synthesize element 103 by bombarding the same curium target used with 14N ions. Eighteen tracks were noted, with decay energy around 9±1 MeV and half-life around 0.25 s; the Berkeley team noted that while the cause could be the production of an isotope of element 103, other possibilities could not be ruled out. While the data agrees reasonably with that later discovered for 257Lr (alpha decay energy 8.87 MeV, half-life 0.6 s), the evidence obtained in this experiment fell far short of the strength required to conclusively demonstrate synthesis of element 103. A follow-up on this experiment was not done, as the target was destroyed. Later, in 1960, the Lawrence Berkeley Laboratory attempted to synthesize the element by bombarding 252Cf with 10B and 11B. The results of this experiment were not conclusive. The first important work on element 103 was done at Berkeley by the nuclear-physics team of Albert Ghiorso, Torbjørn Sikkeland, Almon Larsh, Robert M. Latimer, and their co-workers on February 14, 1961. The first atoms of lawrencium were reportedly made by bombarding a three-milligram target consisting of three isotopes of californium with boron-10 and boron-11 nuclei from the Heavy Ion Linear Accelerator (HILAC). The Berkeley team reported that the isotope 257Lr was detected in this manner, and that it decayed by emitting an 8.6 MeV alpha particle with a half-life of 8±2 s. This identification was later corrected to 258Lr, as later work proved that 257Lr did not have the properties detected, but 258Lr did. This was considered at the time to be convincing proof of synthesis of element 103: while the mass assignment was less certain and proved to be mistaken, it did not affect the arguments in favor of element 103 having been synthesized. Scientists at Joint Institute for Nuclear Research in Dubna (then in the Soviet Union) raised several criticisms: all but one were answered adequately. The exception was that 252Cf was the most common isotope in the target, and in the reactions with 10B, 258Lr could only have been produced by emitting four neutrons, and emitting three neutrons was expected to be much less likely than emitting four or five. This would lead to a narrow yield curve, not the broad one reported by the Berkeley team. A possible explanation was that there was a low number of events attributed to element 103. This was an important intermediate step to the unquestioned discovery of element 103, although the evidence was not completely convincing. The Berkeley team proposed the name "lawrencium" with symbol "Lw", after Ernest Lawrence, inventor of the cyclotron. The IUPAC Commission on Nomenclature of Inorganic Chemistry accepted the name, but changed the symbol to "Lr". This acceptance of the discovery was later characterized as being hasty by the Dubna team.

25298Cf + 115B → 263103Lr* → 258103Lr + 5 10n The first work at Dubna on element 103 came in 1965, when they reported to have made 256Lr in 1965 by bombarding 243Am with 18O, identifying it indirectly from its granddaughter fermium-252. The half-life they reported was somewhat too high, possibly due to background events. Later 1967 work on the same reaction identified two decay energies in the ranges 8.35–8.50 MeV and 8.50–8.60 MeV: these were assigned to 256Lr and 257Lr. Despite repeat attempts, they were unable to confirm assignment of an alpha emitter with a half-life of 8 seconds to 257Lr. The Russians proposed the name "rutherfordium" for the new element in 1967; this name was later proposed by Berkeley for element 104.

24395Am + 188O → 261103Lr* → 256103Lr + 5 10n Further experiments in 1969 at Dubna, and in 1970 at Berkeley, demonstrated an actinide chemistry for the new element; so by 1970 it was known that element 103 is the last actinide. In 1970, the Dubna group reported the synthesis of 255Lr with half-life 20 s and alpha decay energy 8.38 MeV. However, it was not until 1971, when the nuclear physics team at University of California at Berkeley successfully did a whole series of experiments aimed at measuring the nuclear decay properties of the lawrencium isotopes with mass numbers 255 to 260, that all previous results from Berkeley and Dubna were confirmed, apart from the Berkeley's group initial erroneous assignment of their first produced isotope to 257Lr instead of the probably correct 258Lr. All final doubts were dispelled in 1976 and 1977 when the energies of X-rays emitted from 258Lr were measured.

… excerpt ends here. Continue reading the full article.

Illustrations

Lawrencium: A graphic depiction of a nuclear fusion reaction. Two nuclei fuse into one, emitting a neutron. Reactions that created new elements to this moment were similar, though varying numbers of neutrons – or alternatively charged particles – may be emitted instead.[8]
A graphic depiction of a nuclear fusion reaction. Two nuclei fuse into one, emitting a neutron. Reactions that created new elements to this moment were similar, though varying numbers of neutrons – or alternatively charged particles – may be emitted instead.[8]
Lawrencium: Scheme of an apparatus for creation of superheavy elements, based on the Dubna Gas-Filled Recoil Separator set up in the Flerov Laboratory of Nuclear Reactions in JINR. The trajectory within the detector and the beam focusing apparatus changes because of a dipole magnet in the former and quadrupole magnets in the latter.[35]
Scheme of an apparatus for creation of superheavy elements, based on the Dubna Gas-Filled Recoil Separator set up in the Flerov Laboratory of Nuclear Reactions in JINR. The trajectory within the detector and the beam focusing apparatus changes because of a dipole magnet in the former and quadrupole magnets in the latter.[35]
Lawrencium: Albert Ghiorso updating the periodic table in April 1961, writing the symbol "Lw" in as element 103. Codiscoverers Latimer, Sikkeland, and Larsh (left to right) look on.
Albert Ghiorso updating the periodic table in April 1961, writing the symbol "Lw" in as element 103. Codiscoverers Latimer, Sikkeland, and Larsh (left to right) look on.
Lawrencium: The element was named after Ernest Lawrence.
The element was named after Ernest Lawrence.
Lawrencium: Elution sequence of the late trivalent lanthanides and actinides, with ammonium α-HIB as eluant: the broken curve for lawrencium is a prediction.
Elution sequence of the late trivalent lanthanides and actinides, with ammonium α-HIB as eluant: the broken curve for lawrencium is a prediction.

Worked examples

Example 1 — a first encounter with Lawrencium

Start with the simplest possible case. Write down what Lawrencium claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In chemistry, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Lawrencium before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Lawrencium ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Lawrencium

In research
Lawrencium appears in chemistry research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Lawrencium in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Lawrencium is common in secondary-school and first-year university syllabi. It links to neighbouring topics Actinides, Chemical elements, Chemical elements with hexagonal close-packed structure, so understanding it makes those chapters shorter.
In everyday life
Look for Lawrencium outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Lawrencium” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Lawrencium in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Lawrencium means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Lawrencium out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Lawrencium in simple terms?

Lawrencium is a synthetic chemical element; it has symbol Lr (formerly Lw) and atomic number 103. It is named after Ernest Lawrence, inventor of the cyclotron, a device used to discover many artificial radioactive elements.

Why does Lawrencium matter?

Because it connects several chemistry ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Lawrencium?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Lawrencium.

Tags

  • Actinides
  • Chemical elements
  • Chemical elements with hexagonal close-packed structure
  • Lawrencium
  • Synthetic elements
  • Transition metals

Keep exploring