ArticleslgStudy

science

Lewis and Clark's keelboat

Lewis and Clark's keelboat is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Lewis and Clark's keelboat rather than just read about it. In short: Lewis and Clark's keelboat was built as a galley in Pittsburgh in 1803 for the Lewis and Clark Expedition, after detailed specifications by Meriwether Lewis. A keelboat, it could be propelled by oars, sails, poles and towlines.

Lewis and Clark's keelboat — main illustration
Lewis and Clark's keelboat — illustration

Key takeaways

  • Lewis and Clark's keelboat belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Lewis and Clark's keelboat to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Lewis and Clark's keelboat from memory before moving on to harder problems.

Reference excerpt

Lewis and Clark's keelboat was built as a galley in Pittsburgh in 1803 for the Lewis and Clark Expedition, after detailed specifications by Meriwether Lewis. A keelboat, it could be propelled by oars, sails, poles and towlines. The boat was the expedition's main vessel until the spring of 1805, when it was returned to St. Louis.

History In May 1803, Lewis ordered that a riverboat, built to defined specifications, be built at Pittsburgh for the expedition. When he arrived at Pittsburgh, he found that the boat builder had just begun building the boat and that it would take six weeks to finish it. The builder was an alcoholic, being one of the reasons the boat was finished late. This worried Lewis, who wanted to get underway in the vessel before the summer drought lowered the water level of the Ohio River, and to reach the Mississippi River before it froze in the fall. Lewis finally sailed from Pittsburgh with the boat on August 31, 1803. After joining William Clark, the expedition left Clarksville, Indiana, on October 26, with the flagship and two pirogues. Two weeks after the departure from Clarksville, the expedition arrived at Fort Massac. On November 28, it reached Fort Kaskaskia, 50 miles (80 km) south of St. Louis. The winter was spent at Camp Dubois, a temporary camp on the Illinois side of the Mississippi, across from the Missouri River's outlet. On May 14, 1804, the expedition left the camp and began the voyage up the Missouri; the strong countercurrent reduced their speed to one mile per hour. The Mandan villages in what is now North Dakota were reached on October 26, after 1,500 miles (2,400 km) of travel from Camp Dubois. The expedition built and wintered at Fort Mandan. The keelboat was sent back to St. Louis with the returning party on April 6, 1805, while the remainder of the expedition continued overland to the Pacific Ocean. The journey downstream took just 43 days, and the boat reached its goal with diaries and scientific specimens undamaged, in spite of the spring floods. In all likelihood, the boat was then auctioned off to the highest bidder.

Design

Lewis had designed the keelboat; he supervised its construction, and probably made changes and additions during the building period. The boat was basically a galley, a vessel not like any other found west of the Appalachians, although of a standard type used on inland waters in the east. It was 55 feet (17 m) long, with an 8-foot (2.4 m) beam, and with a shallow draft. The mast was 32 feet (9.8 m) high and could be lowered. The boat could carry a headsail and a square rigged sail. A 10-foot (3.0 m) long deck at the bow made a forecastle. A raised aftercastle of the same length contained a cabin. The hold had a capacity of 12 tons. Eleven benches for the oarsmen crossed the deck in front of the aftercastle.

Construction

Lewis was very dissatisfied with how the construction progressed. The boatbuilder was very tardy, drunken, and quarreled with his workers, causing several of them to quit work and leave the yard, further delaying the construction. He promised to bestir himself, but his resolution lasted only for a week. Lewis had to spend most of his time in Pittsburgh at the boat yard, in order to hasten the construction. In his diary, Lewis never named the negligent boatbuilder, and local historians have for a century tried to find out who he was. Much indicates that it was Jacob Myers, an older man with experience as boatbuilder and galley owner.

Propulsion

The keelboat could be propelled by oars, sails, poles and towlines. When using the setting poles, the crew put the poles in the bottom of the river and pushed off while walking from the bow to the stern. Towlines were used by men, horses, or oxen pulling the boat.

Crew According to the standing orders of the expedition, one of the commanding officers should always be in the keelboat as commander. One sergeant was to be at the helm, one amidships, and one at the bow. The helmsman was steersman, supervised the cargo on deck, and was in charge of the compass. The midshipman commanded the armed guard, handled the sails, supervised the oarsmen, and reported river outlets, islands and other remarkable sight amidships. He also distributed the whisky ration and was on duty at night. The bowsman was lookout, reporting all vessels on the river, and all Indian camps. Two privates had permanent tasks aboard, Labiche and Cruzatte, who had been enlisted solely for their experience as boatmen. One of them would always man the larboard bow oar, while the other assisted the bowsman.

References

Illustrations

Lewis and Clark's keelboat illustration
Lewis and Clark's keelboat: William Clark made two drawing of the keelboat in his diary; here from the side.
William Clark made two drawing of the keelboat in his diary; here from the side.
Lewis and Clark's keelboat: Clark's drawing of the keelboat from above
Clark's drawing of the keelboat from above
Lewis and Clark's keelboat: This memorial nickel shows the use of setting poles on Lewis & Clark's Keelboat.
This memorial nickel shows the use of setting poles on Lewis & Clark's Keelboat.

Worked examples

Example 1 — a first encounter with Lewis and Clark's keelboat

Start with the simplest possible case. Write down what Lewis and Clark's keelboat claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Lewis and Clark's keelboat before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Lewis and Clark's keelboat ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Lewis and Clark's keelboat

In research
Lewis and Clark's keelboat appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Lewis and Clark's keelboat in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Lewis and Clark's keelboat is common in secondary-school and first-year university syllabi. It links to neighbouring topics Exploration ships, Galleys, History of Pittsburgh, so understanding it makes those chapters shorter.
In everyday life
Look for Lewis and Clark's keelboat outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Lewis and Clark's keelboat” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Lewis and Clark's keelboat in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Lewis and Clark's keelboat means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Lewis and Clark's keelboat out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Lewis and Clark's keelboat in simple terms?

Lewis and Clark's keelboat was built as a galley in Pittsburgh in 1803 for the Lewis and Clark Expedition, after detailed specifications by Meriwether Lewis. A keelboat, it could be propelled by oars, sails, poles and towlines.

Why does Lewis and Clark's keelboat matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Lewis and Clark's keelboat?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Lewis and Clark's keelboat.

Tags

  • Exploration ships
  • Galleys
  • History of Pittsburgh
  • Keelboats
  • Lewis and Clark Expedition
  • Missouri River
  • Riverboats

Keep exploring