ArticleslgStudy

science

Metrication in New Zealand

Metrication in New Zealand is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Metrication in New Zealand rather than just read about it. In short: New Zealand started metrication in 1969 with the establishment of the Metric Advisory Board (MAB) and fully completed metrication on 14 December 1976. Until the 1970s, New Zealand traditionally used the imperial system for measurement, which was due to historically being a colony of the United Kingdom.

Metrication in New Zealand — main illustration
Metrication in New Zealand — illustration

Key takeaways

  • Metrication in New Zealand belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Metrication in New Zealand to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Metrication in New Zealand from memory before moving on to harder problems.

Reference excerpt

New Zealand started metrication in 1969 with the establishment of the Metric Advisory Board (MAB) and fully completed metrication on 14 December 1976. Until the 1970s, New Zealand traditionally used the imperial system for measurement, which was due to historically being a colony of the United Kingdom.

Strategy toward metrication Prior to metrication, the accounting system was decimalised on 10 July 1967, with one dollar equal to one hundred cents, or ten shillings in the pre-decimal system. The New Zealand metric symbol was introduced in March 1971. To give metrication a human face, a baby girl named Jeannie Preddey became the mascot, known as Little Miss Metric. News and pictures of her progress were intermingled with press releases about the progress of metrication. By the end of 1972, the temperature scale, road signs, and measures used in the sale of such items as wool and milk had been metricated. Only a few letters voiced outright opposition to the changeover.

Exceptions Although New Zealand completed metrication in 1976, a 1992 study of university students found that at that time, there was a continued use of imperial units for birth weight and human height alongside metric units. On the thirtieth anniversary of the introduction of the metric system in December 2006, the New Zealand Consumer Affairs Minister, Judith Tizard, commented that "Now 30 years on the metric system is part of our daily lives" but noted some continuing use of imperial measurements in some birth announcements of baby weights and also with people's heights. A few uses of imperial measurements remain, mostly to do with interoperability:

The aviation industry is one of the last major users of the imperial system: altitude and airport elevation are measured in feet, distances in navigation in nautical miles, and speeds in knots. All other aspects (fuel quantity, aircraft weight, runway length, etc.) use metric. Where exact fitting of parts is required, such as between nuts and bolts, or between tyres and wheel rims. Since the late-1990s, display sizes for screens on televisions, computer monitors, tablets and mobile phones have reverted to having their diagonals advertised solely in inches; the legality of such advertising has not been tested in court.

References

External links Weights and Measures Act 1987 Metrication in New Zealand

Worked examples

Example 1 — a first encounter with Metrication in New Zealand

Start with the simplest possible case. Write down what Metrication in New Zealand claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Metrication in New Zealand before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Metrication in New Zealand ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Metrication in New Zealand

In research
Metrication in New Zealand appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Metrication in New Zealand in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Metrication in New Zealand is common in secondary-school and first-year university syllabi. It links to neighbouring topics Metrication by country, Science and technology in New Zealand, so understanding it makes those chapters shorter.
In everyday life
Look for Metrication in New Zealand outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Metrication in New Zealand” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Metrication in New Zealand in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Metrication in New Zealand means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Metrication in New Zealand out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Metrication in New Zealand in simple terms?

New Zealand started metrication in 1969 with the establishment of the Metric Advisory Board (MAB) and fully completed metrication on 14 December 1976. Until the 1970s, New Zealand traditionally used the imperial system for measurement, which was due to historically being a colony of the United King…

Why does Metrication in New Zealand matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Metrication in New Zealand?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Metrication in New Zealand.

Tags

  • Metrication by country
  • Science and technology in New Zealand

Keep exploring