Microbial fuel cell (MFC) is a type of bioelectrochemical fuel cell system also known as micro fuel cell that generates electric current by diverting electrons produced from the microbial oxidation of reduced compounds (also known as fuel or electron donor) on the anode to oxidized compounds such as oxygen (also known as oxidizing agent or electron acceptor) on the cathode through an external electrical circuit. MFCs produce electricity by using the electrons derived from biochemical reactions catalyzed by bacteria. MFCs can be grouped into two general categories: mediated and unmediated. The first MFCs, demonstrated in the early 20th century, used a mediator: a chemical that transfers electrons from the bacteria in the cell to the anode. Unmediated MFCs emerged in the 1970s; in this type of MFC the bacteria typically have electrochemically active redox proteins such as cytochromes on their outer membrane that can transfer electrons directly to the anode. In the 21st century MFCs have started to find commercial use in wastewater treatment.
History The idea of using microbes to produce electricity was conceived in the early twentieth century. Michael Cressé Potter initiated the subject in 1911. Potter managed to generate electricity from Saccharomyces cerevisiae, but the work received little coverage. In 1931, Barnett Cohen created microbial half fuel cells that, when connected in series, were capable of producing over 35 volts with only a current of 2 milliamps. A study by DelDuca et al. used hydrogen produced by the fermentation of glucose by Clostridium butyricum as the reactant at the anode of a hydrogen and air fuel cell. Though the cell functioned, it was unreliable owing to the unstable nature of hydrogen production by the micro-organisms. This issue was resolved by Suzuki et al. in 1976, who produced a successful MFC design a year later. In the late 1970s, little was understood about how microbial fuel cells functioned. The concept was studied by Robin M. Allen and later by H. Peter Bennetto. People saw the fuel cell as a possible method for the generation of electricity for developing countries. Bennetto's work, starting in the early 1980s, helped build an understanding of how fuel cells operate and he was seen by some as the topic's foremost authority. In May 2007, the University of Queensland, Australia completed a prototype MFC as a cooperative effort with Foster's Brewing. The prototype, a 10 L design, converted brewery wastewater into carbon dioxide, clean water and electricity. The group had plans to create a pilot-scale model for an upcoming international bio-energy conference.
Definition A microbial fuel cell (MFC) is a device that converts chemical energy to electrical energy by the action of microorganisms. These electrochemical cells are constructed using either a bioanode and/or a biocathode. Most MFCs contain a membrane to separate the compartments of the anode (where oxidation takes place) and the cathode (where reduction takes place). The electrons produced during oxidation are transferred directly to an electrode or to a redox mediator species. The electron flux is moved to the cathode. The charge balance of the system is maintained by ionic movement inside the cell, usually across an ionic membrane. Most MFCs use an organic electron donor that is oxidized to produce CO2, protons, and electrons. Other electron donors have been reported, such as sulfur compounds or hydrogen. The cathode reaction uses a variety of electron acceptors, most often oxygen (O2). Other electron acceptors studied include metal recovery by reduction, water to hydrogen, nitrate reduction, and sulfate reduction.
Applications
Power generation MFCs are attractive for power generation applications that require only low power, but where replacing batteries may be impractical, such as wireless sensor networks. Wireless sensors powered by microbial fuel cells can then for example be used for remote monitoring (conservation). Virtually any organic material could be used to feed the fuel cell, including coupling cells to wastewater treatment plants. Chemical process wastewater and synthetic wastewater have been used to produce bioelectricity in dual- and single-chamber mediator less MFCs (uncoated graphite electrodes). Higher power production was observed with a biofilm-covered graphite anode. Fuel cell emissions are well under regulatory limits. MFCs convert energy more efficiently than standard internal combustion engines, which are limited by the Carnot efficiency. In theory, an MFC is capable of energy efficiency far beyond 50%. Rozendal produced hydrogen with 8 times less energy input than conventional hydrogen production technologies. Moreover, MFCs can also work at a smaller scale. Electrodes in some cases need only be 7 μm thick by 2 cm long, such that an MFC can replace a battery. It provides a renewable form of energy and does not need to be recharged. MFCs operate well in mild conditions, 20 °C to 40 °C and at pH of around 7 but lack the stability required for long-term medical applications such as in pacemakers. Power stations can be based on aquatic plants such as algae. If sited adjacent to an existing power system, the MFC system can share its electricity lines.
Education Soil-based microbial fuel cells serve as educational tools, as they encompass multiple scientific disciplines (microbiology, geochemistry, electrical engineering, etc.) and can be made using commonly available materials, such as soils and items from the refrigerator. Kits for home science projects and classrooms are available. One example of microbial fuel cells being used in the classroom is in the IBET (Integrated Biology, English, and Technology) curriculum for Thomas Jefferson High School for Science and Technology. Several educational videos and articles are also available on the International Society for Microbial Electrochemistry and Technology (ISMET Society)"".
Biosensor
… excerpt ends here. Continue reading the full article.
