ArticleslgStudy

physics

Millisecond pulsar

Millisecond pulsar is a physics topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Millisecond pulsar rather than just read about it. In short: A millisecond pulsar (MSP) is a pulsar with a rotational period less than about 10 milliseconds. Millisecond pulsars have been detected in radio, X-ray, and gamma ray portions of the electromagnetic spectrum.

Millisecond pulsar — main illustration
Millisecond pulsar — illustration

Key takeaways

  • Millisecond pulsar belongs to physics; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Millisecond pulsar to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Millisecond pulsar from memory before moving on to harder problems.

Reference excerpt

A millisecond pulsar (MSP) is a pulsar with a rotational period less than about 10 milliseconds. Millisecond pulsars have been detected in radio, X-ray, and gamma ray portions of the electromagnetic spectrum. The leading hypothesis for the origin of millisecond pulsars is that they are old, rapidly rotating neutron stars that have been spun up or "recycled" through accretion of matter from a companion star in a close binary system. For this reason, millisecond pulsars are sometimes called recycled pulsars.

Origins Millisecond pulsars are thought to be related to low-mass X-ray binary systems. It is thought that the X-rays in these systems are emitted by the accretion disk of a neutron star produced by the outer layers of a companion star that has overflowed its Roche lobe. The transfer of angular momentum from this accretion event can increase the rotation rate of the pulsar to hundreds of times per second, as is observed in millisecond pulsars. There has been recent evidence that the standard evolutionary model fails to explain the evolution of all millisecond pulsars, especially young millisecond pulsars with relatively high magnetic fields, e.g. PSR B1937+21. Bülent Kiziltan and S. E. Thorsett (UCSC) showed that different millisecond pulsars must form by at least two distinct processes. But the nature of the other process remains a mystery. Many millisecond pulsars are found in globular clusters. This is consistent with the spin-up hypothesis of their formation, as the extremely high stellar density of these clusters implies a much higher likelihood of a pulsar having (or capturing) a giant companion star. Currently there are approximately 130 millisecond pulsars known in globular clusters. The globular cluster Terzan 5 contains 37 of these, followed by 47 Tucanae with 22 and M28 and M15 with 8 pulsars each.

Pulsar rotational speed limits

The first millisecond pulsar, PSR B1937+21, was discovered in 1982 by Backer et al. Spinning roughly 641 times per second, it remains the second fastest-spinning millisecond pulsar of the approximately 200 that have been discovered. Pulsar PSR J1748-2446ad, discovered in 2004, is the fastest-spinning pulsar known, as of 2025, spinning 716 times per second. Current models of neutron star structure and evolution predict that pulsars would break apart if they spun at a rate of c. 1500 rotations per second or more, and that at a rate of above about 1000 rotations per second they would lose energy by gravitational radiation faster than the accretion process would accelerate them. In early 2007 data from the Rossi X-ray Timing Explorer and INTEGRAL spacecraft discovered a neutron star XTE J1739-285 rotating at 1122 Hz. The result is not statistically significant, with a significance level of only 3 sigma. While it is an interesting candidate for further observations, current results are inconclusive. Still, it is believed that gravitational radiation plays a role in slowing the rate of rotation. One X-ray pulsar that spins at 599 revolutions per second, IGR J00291+5934, is a prime candidate for helping detect such waves in the future (most such X-ray pulsars only spin at around 300 rotations per second). Millisecond pulsars, which can be timed with high precision, have a stability comparable to atomic-clock-based time standards when averaged over decades. This also makes them very sensitive probes of their environments. For example, anything placed in orbit around them causes periodic Doppler shifts in their pulses' arrival times on Earth, which can then be analyzed to reveal the presence of the companion and, with enough data, provide precise measurements of the orbit and the object's mass. The technique is so sensitive that even objects as small as asteroids can be detected if they happen to orbit a millisecond pulsar. The first confirmed exoplanets, discovered several years before the first detections of exoplanets around "normal" solar-like stars, were found in orbit around a millisecond pulsar, PSR B1257+12. These planets remained, for many years, the only Earth-mass objects known outside of the Solar System. One of them, PSR B1257+12 b, has an even smaller mass, just under twice that of the Moon, and is still today the smallest-mass object known beyond the Solar System.

Gravitational wave detection using pulsar timing

Gravitational waves are an important prediction from Einstein's general theory of relativity and result from the bulk motion of matter, fluctuations during the early universe and the dynamics of space-time itself. Pulsars are rapidly rotating, highly magnetized neutron stars formed during the supernova explosions of massive stars. They act as highly accurate clocks with a wealth of physical applications ranging from celestial mechanics, neutron star seismology, tests of strong-field gravity and Galactic astronomy. The proposal to use pulsars as gravitational wave detectors was originally made by Sazhin and Detweiler in the late 1970s. The idea is to treat the solar system barycenter and a distant pulsar as opposite ends of an imaginary arm in space. The pulsar acts as the reference clock at one end of the arm sending out regular signals which are monitored by an observer on the Earth. The effect of a passing gravitational wave would be to perturb the local space-time metric and cause a change in the observed rotational frequency of the pulsar.

… excerpt ends here. Continue reading the full article.

Illustrations

Millisecond pulsar: This diagram shows the steps astronomers say are needed to create a pulsar with a superfast spin. 1. A massive supergiant star and a "normal" Sun-like star orbit each other. 2. The massive star explodes, leaving a pulsar that eventually slows down, turns off, and becomes a cooling neutron star. 3. The Sun-like star eventually expands, spilling material on to the neutron star. This "accretion" speeds up the neutron star's spin. 4. Accretion ends, the neutron star is "recycled" into a millisecond pulsar. But in a densely packed globular cluster (2b)... The lowest mass stars are ejected, the remaining normal stars evolve, and the "recycling" scenario (3–4) takes place, creating many millisecond pulsars.
This diagram shows the steps astronomers say are needed to create a pulsar with a superfast spin. 1. A massive supergiant star and a "normal" Sun-like star orbit each other. 2. The massive star explodes, leaving a pulsar that eventually slows down, turns off, and becomes a cooling neutron star. 3. The Sun-like star eventually expands, spilling material on to the neutron star. This "accretion" speeds up the neutron star's spin. 4. Accretion ends, the neutron star is "recycled" into a millisecond pulsar. But in a densely packed globular cluster (2b)... The lowest mass stars are ejected, the remaining normal stars evolve, and the "recycling" scenario (3–4) takes place, creating many millisecond pulsars.
Millisecond pulsar: The stellar grouping Terzan 5
The stellar grouping Terzan 5
Millisecond pulsar: Plot of correlation between pulsars observed by NANOGrav (2023) vs angular separation between pulsars, compared with a theoretical model (dashed purple) and if there were no gravitational wave background (solid green)[20][21]
Plot of correlation between pulsars observed by NANOGrav (2023) vs angular separation between pulsars, compared with a theoretical model (dashed purple) and if there were no gravitational wave background (solid green)[20][21]

Worked examples

Example 1 — a first encounter with Millisecond pulsar

Start with the simplest possible case. Write down what Millisecond pulsar claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In physics, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Millisecond pulsar before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Millisecond pulsar ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Millisecond pulsar

In research
Millisecond pulsar appears in physics research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Millisecond pulsar in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Millisecond pulsar is common in secondary-school and first-year university syllabi. It links to neighbouring topics Accretion (astrophysics), Millisecond pulsars, Pulsars, so understanding it makes those chapters shorter.
In everyday life
Look for Millisecond pulsar outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Millisecond pulsar” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Millisecond pulsar in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Millisecond pulsar means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Millisecond pulsar out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Millisecond pulsar in simple terms?

A millisecond pulsar (MSP) is a pulsar with a rotational period less than about 10 milliseconds. Millisecond pulsars have been detected in radio, X-ray, and gamma ray portions of the electromagnetic spectrum.

Why does Millisecond pulsar matter?

Because it connects several physics ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Millisecond pulsar?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Millisecond pulsar.

Tags

  • Accretion (astrophysics)
  • Millisecond pulsars
  • Pulsars

Keep exploring