ArticleslgStudy

earth science

Mount Bulusan

Mount Bulusan is a earth science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Mount Bulusan rather than just read about it. In short: Mount Bulusan, also known as Bulusan Volcano, is a stratovolcano on the island of Luzon in the Philippines. Located in the province of Sorsogon in the Bicol Region, it is 70 kilometres (43 mi) southeast of Mayon Volcano and approximately 390 kilometres (240 mi) southeast of Manila.

Mount Bulusan — main illustration
Mount Bulusan — illustration

Key takeaways

  • Mount Bulusan belongs to earth science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Mount Bulusan to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Mount Bulusan from memory before moving on to harder problems.

Reference excerpt

Mount Bulusan, also known as Bulusan Volcano, is a stratovolcano on the island of Luzon in the Philippines. Located in the province of Sorsogon in the Bicol Region, it is 70 kilometres (43 mi) southeast of Mayon Volcano and approximately 390 kilometres (240 mi) southeast of Manila. Bulusan is one of the active volcanoes in the Philippines. The 1818 census showed 1,777 native families paying tribute and they were coexisting with 19 Spanish-Filipino families in the area.

Physical features Bulusan is classified by volcanologists as a stratovolcano (or a composite cone) and covers the northeast rim of Irosin caldera that was formed about 36,000 years ago. It has a peak elevation of 1,535 m (5,036 ft) above sea level with a base diameter of 15 km (9.3 mi). Around the mountain are four craters and four hot springs. The first crater, called Blackbird Lake, is 20 m (66 ft) in diameter and 15 m (49 ft) deep. The second crater is oval, with dimensions of 60 by 30 m (197 by 98 ft) and 15 m (49 ft). The third crater is about 90 m (300 ft) in diameter and 20 m (66 ft) deep, while the fourth, which is near the northeastern rim opened during the 1981 eruption. There is also a 100-metre (330 ft) fissure measuring 5 to 8 m (16 to 26 ft) wide below this crater. The volcano's hot springs are:

Mapaso Masacrot San Benon San Vicente Adjacent volcanic edifices are:

Mount Batuan Mount Binitacan Mount Calaunan Mount Calungalan Mount Homahan Mount Jormajan Mount Juban Mount Tabon-Tabon

Eruptions Bulusan is generally known for its sudden, steam-driven or phreatic explosions. It has erupted 15 times since 2016 and is the fourth most active volcano in the Philippines after Mayon, Taal, and Kanlaon.

Evacuation procedures There are evacuation procedures in place for parts of the peninsula; the farms nearest the volcano are to be evacuated, and many village schools will be closed if a more destructive eruption is possible.

Eruptive History

March–June 2006 The Philippine Institute of Volcanology and Seismology (PHIVOLCS) declared alert level 1 on March 19, after it recorded increased seismic unrest. On June 8, volcanologists raised the alert level to 2 (moderate level of seismic unrest) after the volcano spewed ash. On June 9, the resulting ash cloud damaged a number of houses in the nearby town of Casiguran, 5 kilometres (3.1 mi) north of the volcano, and reached Sorsogon City, about 20 kilometres (12 mi) north of Bulusan. On June 13, volcanologists said new craters were created by mild explosions. Aside from the new craters, two of the volcano's existing four craters appeared to have merged and cracks were observed on the western rim of the summit crater. Another eruption took place on April 8, 2007.

July–October 2007

Following some signs of volcanic activity, on the morning of July 31, 9:37 am (local time), there was a loud explosion described by locals as "like a bomb going off". A cloud of steam and ash shot into the air from Mount Bulusan to a height of 5 kilometres (3.1 mi), drifting and blanketing the surrounding countryside. The eruption lasted for 20 minutes.

November 2010 On November 7, PHIVOLCS recorded increased seismic activity at Bulusan Volcano, 24 hours after it spewed a 600-metre (2,000 ft) ash column and grayish steam on November 5. State volcanologists noted that at least 10 volcanic earthquakes and four explosion-type events were documented after the emission of ash and steam at 8 a.m. on November 5. PHIVOLCS also noted that steaming activity was characterized by strong emission of white steam column that reached a maximum height of 200 meters above the crater rim. It warned the public not to enter the four-kilometer permanent danger zone from the volcano. People near the valleys and streams were also advised to be "extra alert" against sediment-laden stream flows in the event of heavy rains. More ash ejection was reported on November 8–9, with ash fall in Juban and Irosin. A PHIVOLCS bulletin on November 9 stated that eight volcanic earthquakes were recorded from the volcano during the past 24 hours and weak to moderate emission of ash explosion was observed. PHIVOLCS also warned residents near valleys and streams against sediment-laden stream flows in the event of heavy and continuous rainfall.

February 2011 After months of little activity, the volcano suddenly erupted and released a plume of ash 2 kilometres (1.2 mi) high, after water reacted with the hot magma. PHIVOLCS said such explosions were likely to continue for the coming weeks. Initially, hundreds of nearby residents evacuated on their own, but the government stepped in to evacuate thousands more, and imposed a 4-kilometre (2.5 mi) travel ban around the crater. They also advised airplanes to avoid the immediate perimeter due to ash and debris in the air.

May–June 2015 Mount Bulusan ejected a 250 m (820 ft) ash plume on May 1, at around 9:46 pm, lasting for 3.5 minutes. The incident was classified as a "minor explosion event" by PHIVOLCS leading to the raising of alert level 1 (abnormal activity) for the surrounding area. A second ash explosion lasting for five minutes also occurred on the same day. PHIVOLCS determined the cause of the eruptions to be hydrothermal activity beneath the volcano. People were advised not to enter the 4 km (2.5 mi) permanent danger zone. Further advisories were given to low-flying aircraft against the dangers of sudden phreatic eruptions, and to local residents near rivers and streams in case of lahar flows. There were also concerns that rains from Typhoon Noul could trigger lahars and mudslides near the mountain. However, after Noul recurved to the north, the threat did not materialize and the evacuees were permitted to return to their homes. On June 16, Mount Bulusan generated two volcanic eruptions with the first one recorded at 11:02 am which lasted for 10 minutes producing a one kilometer high grayish steam and ash plume and accompanied by rumbling sounds. The second one was recorded at 11:20 am which lasted for a minute producing only a small ash plume. On June 18, the volcano once again erupted but was not observed visually due to thick clouds covering the summit. Prior to the eruption, rumbling sounds was heard between 5:00 am to 7:00 am by residents of the village of Monbon in Irosin town. The next day, June 19, Bulusan erupted yet again at around 2:55 pm producing a 1.5-kilometer high ash plume.

… excerpt ends here. Continue reading the full article.

Illustrations

Mount Bulusan illustration
Mount Bulusan: Mount Bulusan in active mode in February 2007
Mount Bulusan in active mode in February 2007
Mount Bulusan: Bulusan Volcano's Seismic Monitoring Network
Bulusan Volcano's Seismic Monitoring Network

Worked examples

Example 1 — a first encounter with Mount Bulusan

Start with the simplest possible case. Write down what Mount Bulusan claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In earth science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Mount Bulusan before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Mount Bulusan ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Mount Bulusan

In research
Mount Bulusan appears in earth science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Mount Bulusan in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Mount Bulusan is common in secondary-school and first-year university syllabi. It links to neighbouring topics Active volcanoes of the Philippines, Landforms of Sorsogon, Mountains of the Philippines, so understanding it makes those chapters shorter.
In everyday life
Look for Mount Bulusan outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Mount Bulusan in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Mount Bulusan means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Mount Bulusan out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Mount Bulusan in simple terms?

Mount Bulusan, also known as Bulusan Volcano, is a stratovolcano on the island of Luzon in the Philippines. Located in the province of Sorsogon in the Bicol Region, it is 70 kilometres (43 mi) southeast of Mayon Volcano and approximately 390 kilometres (240 mi) southeast of Manila.

Why does Mount Bulusan matter?

Because it connects several earth science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Mount Bulusan?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Mount Bulusan.

Tags

  • Active volcanoes of the Philippines
  • Landforms of Sorsogon
  • Mountains of the Philippines
  • Stratovolcanoes of the Philippines
  • Subduction volcanoes
  • Ultra-prominent peaks of Asia
  • Volcanoes of Luzon

Keep exploring