Multispectral remote sensing is the collection and analysis of reflected, emitted, or back-scattered energy from an object or an area of interest in multiple bands of regions of the electromagnetic spectrum (Jensen, 2005). Subcategories of multispectral remote sensing include hyperspectral, in which hundreds of bands are collected and analyzed, and ultraspectral remote sensing where many hundreds of bands are used (Logicon, 1997). The main purpose of multispectral imaging is the potential to classify the image using multispectral classification. This is a much faster method of image analysis than is possible by human interpretation.
Multispectral remote sensing systems
Remote sensing systems gather data via instruments typically carried on satellites in orbit around the Earth. The remote sensing scanner detects the energy that radiates from the object or area of interest. This energy is recorded as an analog electrical signal and converted into a digital value though an A-to-D conversion. There are several multispectral remote sensing systems that can be categorized in the following way:
Multispectral imaging using discrete detectors and scanning mirrors Landsat Multispectral Scanner (MSS) Landsat Thematic Mapper (TM) NOAA Geostationary Operational Environmental Satellite (GOES) NOAA Advanced Very High Resolution Radiometer (AVHRR) NASA and ORBIMAGE, Inc., Sea-viewing Wide field-of-view Sensor (SeaWiFS) Daedalus, Inc., Aircraft Multispectral Scanner (AMS) NASA Airborne Terrestrial Applications Sensor (ATLAS)
Multispectral imaging using linear arrays SPOT 1, 2, and 3 High Resolution Visible (HRV) sensors and Spot 4 and 5 High Resolution Visible Infrared (HRVIR) and vegetation sensor Indian Remote Sensing System (IRS) Linear Imaging Self-scanning Sensor (LISS) Space Imaging, Inc. (IKONOS) Digital Globe, Inc. (QuickBird) ORBIMAGE, Inc. (OrbView-3) ImageSat International, Inc. (EROS A1) NASA Terra Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) NASA Terra Multiangle Imaging Spectroradiometer (MISR)
Imaging spectrometry using linear and area arrays NASA Jet Propulsion Laboratory Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) Compact Airborne Spectrographic Imager 3 (CASI 3) NASA Terra Moderate Resolution Imaging Spectrometer (MODIS) NASA Earth Observer (EO-1) Advanced Land Imager (ALI), Hyperion, and LEISA Atmospheric Corrector (LAC)
Satellite analog and digital photographic systems Russian SPIN-2 TK-350, and KVR-1000 NASA Space Shuttle and International Space Station Imagery
Multispectral classification methods A variety of methods can be used for the multispectral classification of images:
Algorithms based on parametric and nonparametric statistics that use ratio-and interval-scaled data and nonmetric methods that can also incorporate nominal scale data (Duda et al., 2001), Supervised or unsupervised classification logic, Hard or soft (fuzzy) set classification logic to create hard or fuzzy thematic output products, Per-pixel or object-oriented classification logic, and Hybrid approaches
Supervised classification In this classification method, the identity and location of some of the land-cover types are obtained beforehand from a combination of fieldwork, interpretation of aerial photography, map analysis, and personal experience. The analyst would locate sites that have similar characteristics to the known land-cover types. These areas are known as training sites because the known characteristics of these sites are used to train the classification algorithm for eventual land-cover mapping of the remainder of the image. Multivariate statistical parameters (means, standard deviations, covariance matrices, correlation matrices, etc.) are calculated for each training site. All pixels inside and outside of the training sites are evaluated and allocated to the class with the more similar characteristics.
Classification scheme The first step in the supervised classification method is to identify the land-cover and land-use classes to be used. Land-cover refers to the type of material present on the site (e.g. water, crops, forest, wet land, asphalt, and concrete). Land-use refers to the modifications made by people to the land cover (e.g. agriculture, commerce, settlement). All classes should be selected and defined carefully to properly classify remotely sensed data into the correct land-use and/or land-cover information. To achieve this purpose, it is necessary to use a classification system that contains taxonomically correct definitions of classes. If a hard classification is desired, the following classes should be used:
Mutually exclusive: there is not any taxonomic overlap of any classes (i.e., rain forest and evergreen forest are distinct classes). Exhaustive: all land-covers in the area have been included. Hierarchical: sub-level classes (e.g., single-family residential, multiple-family residential) are created, allowing that these classes can be included in a higher category (e.g., residential). Some examples of hard classification schemes are:
American Planning Association Land-Based Classification System United States Geological Survey Land-use/Land-cover Classification System for Use with Remote Sensor Data U.S. Department of the Interior Fish and Wildlife Service U.S. National Vegetation and Classification System International Geosphere-Biosphere Program IGBP Land Cover Classification System
… excerpt ends here. Continue reading the full article.
