ArticleslgStudy

computer science

National Development Programme in Computer Aided Learning

National Development Programme in Computer Aided Learning is a computer science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand National Development Programme in Computer Aided Learning rather than just read about it. In short: The National Development Programme in Computer Aided Learning (NDPCAL) was the earliest large-scale education programme in the United Kingdom to explore the use of computers for teaching and learning. First proposed in 1969 to the Department of Education and Science by the National Council for Educational Technology. it ran from 1973 to 1977 spending £2.5M to support some 35 projects covering a range of subjects.

Key takeaways

  • National Development Programme in Computer Aided Learning belongs to computer science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect National Development Programme in Computer Aided Learning to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of National Development Programme in Computer Aided Learning from memory before moving on to harder problems.

Reference excerpt

The National Development Programme in Computer Aided Learning (NDPCAL) was the earliest large-scale education programme in the United Kingdom to explore the use of computers for teaching and learning. First proposed in 1969 to the Department of Education and Science by the National Council for Educational Technology. it ran from 1973 to 1977 spending £2.5M to support some 35 projects covering a range of subjects. About half the money was spent on projects in universities and the rest on projects in schools, colleges, industrial and military training. Richard Hooper was appointed its Director and operated with a small central team and the programme was administered by the Council for Educational Technology.

Origins During the 1960s various projects in the US and the UK using mainframe and minicomputers began to develop the field of Computer Aided Learning and there was much debate about its value and effectiveness. The National Council for Educational Technology produced advice to government in 1969 to run a national development programme to explore the value of these approaches. The Department for Education and Science (DES) announced in 1972 the approval by then Secretary of State Margaret Thatcher of a "national development programme in computer assisted learning." Following the announcement of the programme, the post of director was advertised and Richard Hooper was selected.

Strategy NDPCAL's strategy was to work mainly with existing projects in Computer Aided Learning but also to develop feasibility projects with those with good ideas. It required joint funding from the host establishment and stipulated effective evaluation and monitoring processes but allowed a significant degree of autonomy to the projects. The approach of the central team was active and interventionist, working alongside potential projects in their early stages to help develop their design and approach. They required four monthly accounting periods and carefully controlling expenditure.

Governance CET was asked to provide administrative services to the new programme, and the programme's central staff were CET employees but executive control was with a committee made up of civil servants from seven government departments plus a group of co-opted advisers. This programme committee was chaired by the DES and held the final say on proposals from the programme director. It also involved itself in project evaluation, setting up sub-committees of three or so of its members to look in detail at a particular proposal or project. Although each of the thirty projects had its own steering committee national linkage was maintained through a member of the national programme committee sitting on each project steering committee.

Setting Up From January 1973 to early summer 1973, there was a phase of exploration and consultation and from the summer of 1973 to the end of the year, there was the setting up of the programme's management structure and of the first generation of major projects, notably in the university sector. Hooper was supported by two assistant directors, Gillian Frewin (from ICL) and Roger Miles (from the Army School of Instructional Technology). They were supported by two other executive posts and three secretaries. The programme formulated two main aims over its lifetime (Hooper, 1975, p17):

to develop and secure the assimilation of computer assisted and computer managed learning on a regular institutional basis at reasonable cost to make recommendations to appropriate agencies in the public and private sector (including Government) concerning possible future levels and types of investment in computer assisted and computer managed learning in education and training. Two evaluations were set up, one to consider the educational benefits and one to consider the financial aspects.

Breadth of Projects This first government funded programme focused on their use for learning subjects other than programming. It supported some 35 projects, seven in schools, a number in higher education but the majority were based on the British armed services’ growing interest in developing more automated and managed approaches to training. The hardware was limited; the computers were large expensive cabinets of complicated electronics accessed mainly by paper tape with Teletype printouts but already the focus was more on the way technology could be used to improve teaching and learning than as a subject in its own right. NDPCAL funded a wide range of different projects - of different types, covering a range of subjects and age ranges sectors. Some of these, such as Chelsea College's computers in the undergraduate science curriculum, developed into the computers in the curriculum project and Hertfordshire's computer-managed mathematics helped the Advisory Unit for Computer Based Education (AUCBE) at Hatfield develop. It classified projects into different stages

Stage 1 - Design and Feasibility - a project that shows that a particular application of CAL or CML is feasible by developing and piloting applications. Stage 2 - Development and Transferability - the creation of a working system for increasing numbers of students across a number of institutions. Stage 3 - Model Operation - a fully operational project able to act as a model for others. Stage 4 - Assimilation and Dissemination - national funding is being phased out and the institution has taken ownership with other new institutions taking it up. About half the project funds were spent on projects in universities and polytechnics, about one-sixth of the project funds was spent on schools based projects and the rest on military and industrial training. Some of the projects are listed below.

Computer Based Learning Project on Applied Statistics for Social Science, Leeds University - Director: J.R. Hartley Computer Assisted Learning in Engineering Sciences Director: Dr. P.R. Smith Faculty of Engineering, Computer Assisted Teaching Unit, Queen Mary College. Computer Assisted Learning in Chemistry Director: Dr. P.B. Ayscough Dept. of Physical Chemistry, The University of Leeds. Computers in the Undergraduate Science Curriculum Director: Dr. I. McKenzie, University College London Hertfordshire Computer Managed Mathematics in Schools Director: Dr. W.Tagg, Advisory Unit for Computer Based Education

… excerpt ends here. Continue reading the full article.

Worked examples

Example 1 — a first encounter with National Development Programme in Computer Aided Learning

Start with the simplest possible case. Write down what National Development Programme in Computer Aided Learning claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In computer science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to National Development Programme in Computer Aided Learning before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about National Development Programme in Computer Aided Learning ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of National Development Programme in Computer Aided Learning

In research
National Development Programme in Computer Aided Learning appears in computer science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses National Development Programme in Computer Aided Learning in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
National Development Programme in Computer Aided Learning is common in secondary-school and first-year university syllabi. It links to neighbouring topics Computer-aided design, Education in the United Kingdom, Educational technology projects, so understanding it makes those chapters shorter.
In everyday life
Look for National Development Programme in Computer Aided Learning outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study National Development Programme in Computer Aided Learning in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what National Development Programme in Computer Aided Learning means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain National Development Programme in Computer Aided Learning out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is National Development Programme in Computer Aided Learning in simple terms?

The National Development Programme in Computer Aided Learning (NDPCAL) was the earliest large-scale education programme in the United Kingdom to explore the use of computers for teaching and learning. First proposed in 1969 to the Department of Education and Science by the National Council for Educ…

Why does National Development Programme in Computer Aided Learning matter?

Because it connects several computer science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study National Development Programme in Computer Aided Learning?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on National Development Programme in Computer Aided Learning.

Tags

  • Computer-aided design
  • Education in the United Kingdom
  • Educational technology projects
  • Governmental educational technology organizations
  • Information technology organisations based in the United Kingdom
  • United Kingdom educational programmes

Keep exploring