ArticleslgStudy

engineering

Nonthermal plasma

Nonthermal plasma is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Nonthermal plasma rather than just read about it. In short: A nonthermal plasma, cold plasma or non-equilibrium plasma is a plasma which is not in thermodynamic equilibrium, because the electron temperature is much hotter than the temperature of heavy species (ions and neutrals). As only electrons are thermalized, their Maxwell-Boltzmann velocity distribution is very different from the ion velocity distribution.

Key takeaways

  • Nonthermal plasma belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Nonthermal plasma to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Nonthermal plasma from memory before moving on to harder problems.

Reference excerpt

A nonthermal plasma, cold plasma or non-equilibrium plasma is a plasma which is not in thermodynamic equilibrium, because the electron temperature is much hotter than the temperature of heavy species (ions and neutrals). As only electrons are thermalized, their Maxwell-Boltzmann velocity distribution is very different from the ion velocity distribution. When one of the velocities of a species does not follow a Maxwell-Boltzmann distribution, the plasma is said to be non-Maxwellian. A kind of common nonthermal plasma is the mercury-vapor gas within a fluorescent lamp, where the "electron gas" reaches a temperature of 20,000 K (19,700 °C; 35,500 °F) while the rest of the gas, ions and neutral atoms, stays barely above room temperature, so the bulb can even be touched with hands while operating.

Applications

Food industry In the context of food processing, a nonthermal plasma (NTP) or cold plasma is specifically an antimicrobial treatment being investigated for application to fruits, vegetables and meat products with fragile surfaces. These foods are either not adequately sanitized or are otherwise unsuitable for treatment with chemicals, heat or other conventional food processing tools. While the applications of nonthermal plasma were initially focused on microbiological disinfection, such as reduction of odors in pork production, newer applications such as enzyme inactivation, biomolecule oxidation, protein modification, prodrug activation, and pesticide dissipation are being actively researched.

Nonthermal plasma also sees increasing use in the sterilization of teeth and hands, in hand dryers as well as in self-decontaminating filters. Non thermal plasmas are also used to treat seeds in order to improve germination rate and yield for controlled environment agriculture. The term cold plasma has been recently used as a convenient descriptor to distinguish the one-atmosphere, near room temperature plasma discharges from other plasmas, operating at hundreds or thousands of degrees above ambient (see Plasma (physics) § Temperature. Within the context of food processing the term "cold" can potentially engender misleading images of refrigeration requirements as a part of the plasma treatment. However, in practice this confusion has not been an issue. "Cold plasmas" may also loosely refer to weakly ionized gases (degree of ionization < 0.01%).

Nomenclature The nomenclature for nonthermal plasma found in the scientific literature is varied. In some cases, the plasma is referred to by the specific technology used to generate it ("gliding arc", "plasma pencil", "plasma needle", "plasma jet", "dielectric barrier discharge", "piezoelectric direct discharge plasma", etc.), while other names are more generally descriptive, based on the characteristics of the plasma generated ("one atmosphere uniform glow discharge plasma", "atmospheric plasma", "ambient pressure nonthermal discharges", "non-equilibrium atmospheric pressure plasmas", etc.). The two features which distinguish NTP from other mature, industrially applied plasma technologies, is that they are 1) nonthermal and 2) operate at or near atmospheric pressure.

Technologies

Medicine

An emerging field adds the capabilities of nonthermal plasma to dentistry and medicine. Cold plasma is used to treat chronic wounds.

Power generation

Magnetohydrodynamic power generation, a direct energy conversion method from a hot gas in motion within a magnetic field was developed in the 1960s and 1970s with pulsed MHD generators known as shock tubes, using non-equilibrium plasmas seeded with alkali metal vapors (like caesium, to increase the limited electrical conductivity of gases) heated at a limited temperature of 2000 to 4000 kelvins (to protect walls from thermal erosion) but where electrons were heated at more than 10,000 kelvins. A particular and unusual case of "inverse" nonthermal plasma is the very high temperature plasma produced by the Z machine, where ions are much hotter than electrons.

Aerospace

Aerodynamic active flow control solutions involving technological nonthermal weakly ionized plasmas for subsonic, supersonic and hypersonic flight are being studied, as plasma actuators in the field of electrohydrodynamics, and as magnetohydrodynamic converters when magnetic fields are also involved. Studies conducted in wind tunnels involve most of the time low atmospheric pressure similar to an altitude of 20–50 km, typical of hypersonic flight, where the electrical conductivity of air is higher, hence non-thermal weakly ionized plasmas can be easily produced with a lower energy expense.

Catalysis Atmospheric pressure non-thermal plasma can be used to promote chemical reactions. Collisions between hot temperature electrons and cold gas molecules can lead to dissociation reactions and the subsequent formation of radicals. This kind of discharge exhibits reacting properties that are usually seen in high temperature discharge systems. Non-thermal plasma is also used in conjunction with a catalyst to further enhance the chemical conversion of reactants or to alter the products chemical composition. Among the different application fields, there are ozone production at a commercial level; pollution abatement, both solid (PM, VOC) and gaseous (SOx, NOx); CO2 conversion in fuels (methanol, syngas) or value added chemicals; nitrogen fixation; methanol synthesis; liquid fuels synthesis from lighter hydrocarbons (e.g. methane), hydrogen production via hydrocarbons reforming

… excerpt ends here. Continue reading the full article.

Worked examples

Example 1 — a first encounter with Nonthermal plasma

Start with the simplest possible case. Write down what Nonthermal plasma claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Nonthermal plasma before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Nonthermal plasma ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Nonthermal plasma

In research
Nonthermal plasma appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Nonthermal plasma in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Nonthermal plasma is common in secondary-school and first-year university syllabi. It links to neighbouring topics Food preservation, Plasma types, so understanding it makes those chapters shorter.
In everyday life
Look for Nonthermal plasma outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Nonthermal plasma in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Nonthermal plasma means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Nonthermal plasma out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Nonthermal plasma in simple terms?

A nonthermal plasma, cold plasma or non-equilibrium plasma is a plasma which is not in thermodynamic equilibrium, because the electron temperature is much hotter than the temperature of heavy species (ions and neutrals). As only electrons are thermalized, their Maxwell-Boltzmann velocity distributi…

Why does Nonthermal plasma matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Nonthermal plasma?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Nonthermal plasma.

Tags

  • Food preservation
  • Plasma types

Keep exploring