ArticleslgStudy

science

Otonality and utonality

Otonality and utonality is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Otonality and utonality rather than just read about it. In short: Otonality and utonality are terms introduced by Harry Partch to describe chords whose pitch classes are the harmonics or subharmonics of a given fixed tone (identity), respectively. For example: ⁠1/1⁠, ⁠2/1⁠, ⁠3/1⁠,... or ⁠1/1⁠, ⁠1/2⁠, ⁠1/3⁠,....

Otonality and utonality — main illustration
Otonality and utonality — illustration

Key takeaways

  • Otonality and utonality belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Otonality and utonality to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Otonality and utonality from memory before moving on to harder problems.

Reference excerpt

Otonality and utonality are terms introduced by Harry Partch to describe chords whose pitch classes are the harmonics or subharmonics of a given fixed tone (identity), respectively. For example: ⁠1/1⁠, ⁠2/1⁠, ⁠3/1⁠,... or ⁠1/1⁠, ⁠1/2⁠, ⁠1/3⁠,....

An Otonality is that set of pitches generated by the numerical factors (...identities)...over a numerical constant (...numerary nexus) in the denominator. Conversely, a Utonality is the inversion of an Otonality, a set of pitches with a numerical constant in the numerator over the numerical factors...in the denominator.

Definition

A Utonality is a ...chord that is the inversion of an Otonality: it is formed by building the same interval sequence as that of an Otonality downward from the root of the chord, rather than upward. The analogy, in this case, is not to the harmonic series but to the subharmonic, or undertone series. An otonality is a collection of pitches which can be expressed in ratios, expressing their relationship to the fixed tone, that have equal denominators and consecutive numerators. For example, ⁠1/1⁠, ⁠5/4⁠, and ⁠3/2⁠ (just major chord) form an otonality because they can be written as ⁠4/4⁠, ⁠5/4⁠, ⁠6/4⁠. This in turn can be written as an extended ratio 4:5:6. Every otonality is therefore composed of members of a harmonic series. Similarly, the ratios of a utonality share the same numerator and have consecutive denominators. ⁠7/4⁠, ⁠7/5⁠, ⁠7/6⁠, and ⁠1/1⁠ (⁠7/7⁠) form a utonality, sometimes written as ⁠1/4:5:6:7⁠, or as ⁠7/7:6:5:4⁠. Every utonality is therefore composed of members of a subharmonic series. This term is used extensively by Harry Partch in Genesis of a Music. An otonality corresponds to an arithmetic series of frequencies (such as 110 Hz, 220 Hz, 330 Hz, 440 Hz, etc.). Brass instruments naturally produce otonalities, and indeed otonalities are inherent in the harmonics of a single fundamental tone. Tuvan Khoomei singers produce otonalities with their vocal tracts. Utonality is the opposite, corresponding to a subharmonic series of frequencies, or an arithmetic series of wavelengths (the inverse of frequency), such as 1 foot, 2 feet, 3 feet, 4 feet, etc. The arithmetical proportion "may be considered as a demonstration of utonality ('minor tonality')." If otonality and utonality are defined broadly, every just intonation chord is both an otonality and a utonality. For example, the minor triad in root position is made up of the 10th, 12th and 15th harmonics, and ⁠10/10⁠, ⁠12/10⁠ and ⁠15/10⁠ meets the definition of otonal. A better, narrower definition requires that the harmonic (or subharmonic) series members be adjacent. Thus 4:5:6 is an otonality, but 10:12:15 is not. (Alternate voicings of 4:5:6, such as 5:6:8, 3:4:5:6, etc. would presumably also be otonalities.) Under this definition, only a few chord types qualify as otonalities or utonalities. The only otonality triads are the major triad 4:5:6 and the diminished triad 5:6:7. The only such tetrad is the dominant seventh tetrad 4:5:6:7. Microtonalists have extended the concept of otonal and utonal to apply to all just intonation chords. A chord is otonal if its odd limit increases on being melodically inverted, utonal if its odd limit decreases, and ambitonal if its odd limit is unchanged. Melodic inversion is not inversion in the usual sense, in which C–E–G becomes E–G–C or G–C–E. Instead, C–E–G is turned upside down to become C–A♭–F. A chord's odd limit is the largest of the odd limits of each of the numbers in the chord's extended ratio. For example, the major triad in close position is 4:5:6. These three numbers have odd limits of 1, 5 and 3 respectively. The largest of the three is 5, thus the chord has an odd limit of 5. Its melodic inverse 10:12:15 has an odd limit of 15, which is greater, therefore the major triad is otonal. A chord's odd limit is independent of its voicing, so alternate voicings such as 5:6:8, 3:4:5:6, etc. are also otonal. All otonalities are otonal, but not all otonal chords are otonalities. Likewise, all utonalities are a subset of utonal chords. The major ninth chord 8:10:12:15:18 is also otonal. Examples of ambitonal chords are the major sixth chord (12:15:18:20) and the major seventh chord (8:10:12:15). Ambitonal chords often can be reasonably interpreted as either major or minor. For example, CM6, in certain contexts or voicings, can be interpreted as Am7. Partch coined the term "Monophony" (not to be confused with monophony) to describe a system of just intervals deriving from a single starting pitch.

Relationship to standard Western music theory

Partch said that his 1931 coinage of "otonality" and "utonality" was "hastened" by having read Henry Cowell's discussion of undertones in New Musical Resources (1930).

The 5-limit otonality is simply a just major chord, and the 5-limit utonality is a just minor chord. Thus otonality and utonality can be viewed as extensions of major and minor tonality respectively. However, whereas standard music theory views a minor chord as being built up from the root with a minor third and a perfect fifth, a utonality is viewed as descending from what's normally considered the "fifth" of the chord, so the correspondence is not perfect. This corresponds with the dualistic theory of Hugo Riemann:

In the era of meantone temperament, augmented sixth chords of the kind known as the German sixth (or the English sixth, depending on how it resolves) were close in tuning and sound to the 7-limit otonality, called the tetrad. This chord might be, for example, A♭-C-E♭-G♭[F♯] . Standing alone, it has something of the sound of a dominant seventh, but considerably less dissonant. It has also been suggested that the Tristan chord, for example, F-B-D♯-G♯ can be considered a utonality, or 7-limit utonal tetrad, which it closely approximates if the tuning is meantone, though presumably less well in the tuning of a Wagnerian orchestra. Whereas 5-limit chords associate otonal with major and utonal with minor, 7-limit chords that don't use 5 as a prime factor reverse this association. For example, 6:7:9 is otonal but minor, and 14:18:21 is utonal but major.

Consonance

… excerpt ends here. Continue reading the full article.

Illustrations

Otonality and utonality: 5-limit otonality and utonality: overtone and "undertone" series, partials 1-5 numbered Play otonalityⓘ, Play utonalityⓘ, Play major chord on Cⓘ, and Play minor chord on Fⓘ.
5-limit otonality and utonality: overtone and "undertone" series, partials 1-5 numbered Play otonalityⓘ, Play utonalityⓘ, Play major chord on Cⓘ, and Play minor chord on Fⓘ.
Otonality and utonality: 31-limit otonality Playⓘ
31-limit otonality Playⓘ
Otonality and utonality: 13-limit utonality Playⓘ
13-limit utonality Playⓘ
Otonality and utonality: Starting from the symmetrical chords, otonal chords flatten one note, while utonal chords sharpen one note.
Starting from the symmetrical chords, otonal chords flatten one note, while utonal chords sharpen one note.
Otonality and utonality: Minor as upside down major.
Minor as upside down major.

Worked examples

Example 1 — a first encounter with Otonality and utonality

Start with the simplest possible case. Write down what Otonality and utonality claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Otonality and utonality before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Otonality and utonality ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Otonality and utonality

In research
Otonality and utonality appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Otonality and utonality in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Otonality and utonality is common in secondary-school and first-year university syllabi. It links to neighbouring topics Harmony, Harry Partch, Musical tuning, so understanding it makes those chapters shorter.
In everyday life
Look for Otonality and utonality outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Otonality and utonality in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Otonality and utonality means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Otonality and utonality out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Otonality and utonality in simple terms?

Otonality and utonality are terms introduced by Harry Partch to describe chords whose pitch classes are the harmonics or subharmonics of a given fixed tone (identity), respectively. For example: ⁠1/1⁠, ⁠2/1⁠, ⁠3/1⁠,... or ⁠1/1⁠, ⁠1/2⁠, ⁠1/3⁠,....

Why does Otonality and utonality matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Otonality and utonality?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Otonality and utonality.

Tags

  • Harmony
  • Harry Partch
  • Musical tuning
  • Pitch (music)

Keep exploring