ArticleslgStudy

mathematics

Overdispersion

Overdispersion is a mathematics topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Overdispersion rather than just read about it. In short: In statistics, overdispersion is the presence of greater variability (statistical dispersion) in a data set than would be expected based on a given statistical model. A common task in applied statistics is choosing a parametric model to fit a given set of empirical observations.

Key takeaways

  • Overdispersion belongs to mathematics; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Overdispersion to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Overdispersion from memory before moving on to harder problems.

Reference excerpt

In statistics, overdispersion is the presence of greater variability (statistical dispersion) in a data set than would be expected based on a given statistical model. A common task in applied statistics is choosing a parametric model to fit a given set of empirical observations. This necessitates an assessment of the fit of the chosen model. It is usually possible to choose the model parameters in such a way that the theoretical population mean of the model is approximately equal to the sample mean. However, especially for simple models with few parameters, theoretical predictions may not match empirical observations for higher moments. When the observed variance is higher than the variance of a theoretical model, overdispersion has occurred. Conversely, underdispersion means that there was less variation in the data than predicted. Overdispersion is a very common feature in applied data analysis because in practice, populations are frequently heterogeneous (non-uniform) contrary to the assumptions implicit within widely used simple parametric models.

Examples

Poisson Overdispersion is often encountered when fitting very simple parametric models, such as those based on the Poisson distribution. The Poisson distribution has one free parameter and does not allow for the variance to be adjusted independently of the mean. The choice of a distribution from the Poisson family is often dictated by the nature of the empirical data. For example, Poisson regression analysis is commonly used to model count data. If overdispersion is a feature, an alternative model with additional free parameters may provide a better fit. In the case of count data, a Poisson mixture model like the negative binomial distribution can be proposed instead, in which the mean of the Poisson distribution can itself be thought of as a random variable drawn – in this case – from the gamma distribution thereby introducing an additional free parameter (note the resulting negative binomial distribution is completely characterized by two parameters).

Binomial As a more concrete example, it has been observed that the number of boys born to families does not conform faithfully to a binomial distribution as might be expected. Instead, the sex ratios of families seem to skew toward either boys or girls (see, for example the Trivers–Willard hypothesis for one possible explanation) i.e. there are more all-boy families, more all-girl families and not enough families close to the population 51:49 boy-to-girl mean ratio than expected from a binomial distribution, and the resulting empirical variance is larger than specified by a binomial model. In this case, the beta-binomial model distribution is a popular and analytically tractable alternative model to the binomial distribution since it provides a better fit to the observed data. To capture the heterogeneity of the families, one can think of the probability parameter of the binomial model (say, probability of being a boy) is itself a random variable (i.e. random effects model) drawn for each family from a beta distribution as the mixing distribution. The resulting compound distribution (beta-binomial) has an additional free parameter. Another common model for overdispersion—when some of the observations are not Bernoulli—arises from introducing a normal random variable into a logistic model. Software is widely available for fitting this type of multilevel model. In this case, if the variance of the normal variable is zero, the model reduces to the standard (undispersed) logistic regression. This model has an additional free parameter, namely the variance of the normal variable. With respect to binomial random variables, the concept of overdispersion makes sense only if n>1 (i.e. overdispersion is nonsensical for Bernoulli random variables).

Normal distribution As the normal distribution (Gaussian) has variance as a parameter, any data with finite variance (including any finite data) can be modeled with a normal distribution with the exact variance – the normal distribution is a two-parameter model, with mean and variance. Thus, in the absence of an underlying model, there is no notion of data being overdispersed relative to the normal model, though the fit may be poor in other respects (such as the higher moments of skew, kurtosis, etc.). However, in the case that the data is modeled by a normal distribution with an expected variation, it can be over- or under-dispersed relative to that prediction. For example, in a statistical survey, the margin of error (determined by sample size) predicts the sampling error and hence dispersion of results on repeated surveys. If one performs a meta-analysis of repeated surveys of a fixed population (say with a given sample size, so margin of error is the same), one expects the results to fall on normal distribution with standard deviation equal to the margin of error. However, in the presence of study heterogeneity where studies have different sampling bias, the distribution is instead a compound distribution and will be overdistributed relative to the predicted distribution. For example, given repeated opinion polls all with a margin of error of 3%, if they are conducted by different polling organizations, one expects the results to have standard deviation greater than 3%, due to pollster bias from different methodologies.

Differences in terminology among disciplines Over- and underdispersion are terms which have been adopted in branches of the biological sciences. In parasitology, the term 'overdispersion' is generally used as defined here – meaning a distribution with a higher than expected variance. In some areas of ecology, however, meanings have been transposed, so that overdispersion is actually taken to mean more even (lower variance) than expected. This confusion has caused some ecologists to suggest that the terms 'aggregated', or 'contagious', would be better used in ecology for 'overdispersed'. Such preferences are creeping into parasitology too. Generally this suggestion has not been heeded, and confusion persists in the literature. Furthermore in demography, overdispersion is often evident in the analysis of death count data, but demographers prefer the term 'unobserved heterogeneity'.

See also Index of dispersion Compound probability distribution Quasi-likelihood

References

Worked examples

Example 1 — a first encounter with Overdispersion

Start with the simplest possible case. Write down what Overdispersion claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In mathematics, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Overdispersion before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Overdispersion ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Overdispersion

In research
Overdispersion appears in mathematics research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Overdispersion in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Overdispersion is common in secondary-school and first-year university syllabi. It links to neighbouring topics Point processes, Probability distribution fitting, Spatial analysis, so understanding it makes those chapters shorter.
In everyday life
Look for Overdispersion outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Overdispersion in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Overdispersion means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Overdispersion out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Overdispersion in simple terms?

In statistics, overdispersion is the presence of greater variability (statistical dispersion) in a data set than would be expected based on a given statistical model. A common task in applied statistics is choosing a parametric model to fit a given set of empirical observations.

Why does Overdispersion matter?

Because it connects several mathematics ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Overdispersion?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Overdispersion.

Tags

  • Point processes
  • Probability distribution fitting
  • Spatial analysis

Keep exploring