A paper machine (or papermachine or paper-making machine) is an industrial machine which is used in the pulp and paper industry to create paper in large quantities at high speed. Modern paper-making machines are based on the principles of the Fourdrinier Machine, which uses a moving woven mesh to create a continuous paper web by filtering out the fibres held in a paper stock and producing a continuously moving wet mat of fibre. This is dried in the machine to produce a strong paper web. The basic process is an industrialised version of the historical process of hand paper-making, which could not satisfy the demands of developing modern society for large quantities of a printing and writing substrate. The first modern paper machine was invented by Louis-Nicolas Robert in France in 1799, and an improved version patented in Britain by Henry and Sealy Fourdrinier in 1806. The same process is used to produce paperboard on a paperboard machine.
Process sections
Paper machines usually have at least five distinct operational sections:
Forming section, commonly called the wet end or wire section, is a continuous rotating wire mesh which removes water from the paper by sucking it out of suspension via vacuum. Press section, where the wet fibre web passes between large rolls loaded under high pressure to squeeze out as much water as possible. Drying section, where the pressed sheet passes partly around, in a serpentine manner, a series of steam heated drying cylinders. Drying removes the water content down to a level of about 6%, where it will remain at typical indoor atmospheric conditions. Infra-red driers may also be also used to supplement cylinder drying where required. Size Press section, where the semi-dried paper is applied with a thin layer of starch and/ or other chemicals to improve several paper properties, reduce dusting and air permeability, increase stiffness, bursting strength and short span compression Calender section, where the dried paper is smoothened under high loading and pressure. Only one nip (where the sheet is pressed between two rolls) is necessary in order to hold the sheet, which shrinks through the drying section and is held in tension between the press section (or breaker stack if used) and the calender. Extra nips give more smoothing, but at some expense to paper strength. The calendar section can either be a part of the machine (On-line) or in a separate part of the paper mill (Off-line). Reel section, where paper coming out of the machine is wound onto individual spools for further processing. There can also be a coating section to modify the surface characteristics with coatings such as kaolin clay, alternatively known as china clay. This section can be on-line or off-line as well.
History Before the invention of continuous paper making, paper was made in individual sheets by stirring a container of pulp slurry and either pouring it into a fabric sieve called a sheet mould or dipping and lifting the sheet mould from the vat. While still on the fabric in the sheet mould, the wet paper was pressed to remove excess water. The sheet was then lifted off to be hung over a rope or wooden rod to air dry.
Fourdrinier machine
In 1799, Louis-Nicolas Robert of Essonnes, France, was granted a patent for a continuous paper making machine. At the time, Robert was working for Saint-Léger Didot, with whom he quarreled over the ownership of the invention. Didot believed that England was a better place to develop the machine but due to the turbulence of the French Revolution, he could not go there himself, so he sent his brother-in-law, John Gamble, an Englishman living in Paris. Through a chain of acquaintances, Gamble was introduced to the brothers Sealy and Henry Fourdrinier, stationers of London, who agreed to finance the project. Gamble was granted British patent 2487 on October 20, 1801. The Fourdrinier machine used a specially woven fabric mesh conveyor belt (known as a wire, as it was once woven from bronze) in the forming section, where a slurry of fibre (usually wood or other vegetable fibres) is drained to create a continuous paper web. The original Fourdrinier forming section used a horizontal drainage area, referred to as the drainage table. With the help of Bryan Donkin, a skilled and ingenious mechanic, an improved version of the Robert original was installed at Frogmore Paper Mill, Apsley, Hertfordshire, in 1803, followed by another in 1804. A third machine was installed at the Fourdriniers' own mill at Two Waters. The Fourdriniers also bought a mill at St Neots intending to install two machines there, and the process and machines continued to develop. Close to Frogmore Mill in Apsley, John Dickinson designed and built an alternate machine type; a Cylinder Mould Machine in 1809. Thomas Gilpin is most often credited for creating the first U.S. cylinder type papermaking machine at Brandywine Creek, Delaware in 1817. This machine was a cylinder mould machine. The Fourdrinier machine wasn't introduced into the USA until 1827.
Similar designs Records show Charles Kinsey of Paterson, NJ had already patented a continuous process papermaking machine in 1807. Kinsey's machine was built locally by Daniel Sawn and by 1809 the Kinsey machine was successfully making paper at the Essex Mill in Paterson. Financial stress and potential opportunities created by the Embargo of 1807 eventually persuaded Kinsey and his backers to change the mill's focus from paper to cotton and Kinsey's early papermaking successes were soon overlooked and forgotten. Gilpin's 1817 patent was similar to Kinsey's, as was the John Ames patent of 1822. The Ames patent was challenged by his competitors, asserting that Kinsey was the original inventor and Ames had been stealing other people's ideas, their evidence being the employment of Daniel Sawn to work on his machine.
Related inventions The method of continuous production demonstrated by the paper machine influenced the development of continuous rolling of iron and later steel and other continuous production processes.
Pulp types and their preparations
… excerpt ends here. Continue reading the full article.
