ArticleslgStudy

science

Peierls transition

Peierls transition is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Peierls transition rather than just read about it. In short: A Peierls transition or Peierls distortion is a distortion of the periodic lattice of a one-dimensional crystal. Atomic positions oscillate, so that the perfect order of the 1-D crystal is broken.

Peierls transition — main illustration
Peierls transition — illustration

Key takeaways

  • Peierls transition belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Peierls transition to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Peierls transition from memory before moving on to harder problems.

Reference excerpt

A Peierls transition or Peierls distortion is a distortion of the periodic lattice of a one-dimensional crystal. Atomic positions oscillate, so that the perfect order of the 1-D crystal is broken. It is named after Rudolf Peierls.

Peierls' theorem Peierls' theorem states that a one-dimensional equally spaced chain with one electron per ion is unstable.

This theorem was first espoused in the 1930s by Rudolf Peierls. It can be proven using a simple model of the potential for an electron in a 1-D crystal with lattice spacing a {\displaystyle a} . The periodicity of the crystal creates energy band gaps in the ϵ − k {\displaystyle \epsilon -k} diagram at the edge of the Brillouin zone k a = ± π {\displaystyle ka=\pm \pi } (similar to the result of the Kronig–Penney model, which helps to explain the origin of band gaps in semiconductors). If the ions each contribute one electron, then the band will be half-filled, up to values of k a = ± π / 2 {\displaystyle ka=\pm \pi /2} in the ground state.

Imagine a lattice distortion where every other ion moves closer to one neighbor and further away from the other, the unfavourable energy of the long bond between ions is outweighed by the energy gain of the short bond. The period has just doubled from a {\displaystyle a} to 2 a {\displaystyle 2a} . In essence, the proof relies on the fact that doubling the period would introduce new band gaps located at multiples of k a = ± π / 2 {\displaystyle ka=\pm \pi /2} ; see the figure in the right. This would cause small energy savings, based on the distortion of the bands in the vicinity of the new gaps. Approaching k a = ± π / 2 {\displaystyle ka=\pm \pi /2} , the distortion due to the introduction of the new band gap will cause the electrons to be at a lower energy than they would be in the perfect crystal. Therefore, this lattice distortion becomes energetically favorable when the energy savings due to the new band gaps outweighs the elastic energy cost of rearranging the ions. Of course, this effect will be noticeable only when the electrons are arranged close to their ground state – in other words, thermal excitation should be minimized. Therefore, the Peierls transition should be seen at low temperature. This is the basic argument for the occurrence of the Peierls transition, sometimes called dimerization.

Historical background The earliest written record of the Peierls transition was presented at the 1954 École de physique des Houches. These lecture notes (shown below) contain Rudolf Peierls' handwritten equations and figures, and can be viewed in the library of the Institut Laue–Langevin, in Grenoble, France.

Peierls' discovery gained experimental backing during the effort to find new superconducting materials. In 1964, Dr. William Little of the Stanford University Department of Physics theorized that a certain class of polymer chains may experience a high Tc superconducting transition. The basis for his assertion was that the lattice distortions that lead to pairing of electrons in the BCS theory of superconductivity could be replaced instead by rearranging the electron density in a series of side chains. This means that now electrons would be responsible for creating the Cooper pairs instead of ions. Because the transition temperature is inversely proportional to the square root of the mass of the charged particle responsible for the distortions, the Tc should be improved by a corresponding factor:

T T i = M i m e . {\displaystyle {\frac {T}{T_{i}}}={\sqrt {\frac {M_{i}}{m_{e}}}}.}

The subscript i represents "ion", while e represents "electron". The predicted benefit in superconducting transition temperature was therefore a factor of about 300. In the 1970s, various organic materials such as TTF-TCNQ were synthesized. What was found is that these materials underwent an insulating transition rather than a superconducting one. Eventually it was realized that these were the first experimental observations of the Peierls transition. With the introduction of new band gaps after the lattice becomes distorted, electrons must overcome this new energy barrier in order to become free to conduct. The simple model of the Peierls distortion as a rearrangement of ions in a 1-D chain could describe why these materials became insulators rather than superconductors.

Related physical consequences Peierls predicted that the rearrangement of the ion cores in a Peierls transition would produce periodic fluctuations in the electron density. These are commonly called charge density waves, and they are an example of collective charge transport. Several materials systems have verified the existence of these waves. Good candidates are weakly coupled molecular chains, where electrons can move freely along the direction of the chains, but motion is restricted perpendicular to the chains. NbSe3 and K0.3MoO3 are two examples in which charge density waves have been observed at relatively high temperatures of 145 K and 180 K respectively. Furthermore, the 1-D nature of the material causes a breakdown of the Fermi liquid theory for electron behavior. Therefore, a 1-D conductor should behave as a Luttinger liquid instead. A Luttinger liquid is a paramagnetic one-dimensional metal without Landau quasi-particle excitations.

… excerpt ends here. Continue reading the full article.

Illustrations

Peierls transition: The lowest Bloch bands of a distorted 1D lattice. Energy gaps appear in 
  
    
      
        k
        a
        =
        ±
        π
        
          /
        
        2
      
    
    {\displaystyle ka=\pm \pi /2}
  
 as a result of the Peierls' instability.
The lowest Bloch bands of a distorted 1D lattice. Energy gaps appear in k a = ± π / 2 {\displaystyle ka=\pm \pi /2} as a result of the Peierls' instability.
Peierls transition: Peierls distortion of a 1-d periodic lattice.
Peierls distortion of a 1-d periodic lattice.
Peierls transition: Notes from the 1954 Les Houches Conference presenting the Peierls transition.
Notes from the 1954 Les Houches Conference presenting the Peierls transition.

Worked examples

Example 1 — a first encounter with Peierls transition

Start with the simplest possible case. Write down what Peierls transition claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Peierls transition before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Peierls transition ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Peierls transition

In research
Peierls transition appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Peierls transition in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Peierls transition is common in secondary-school and first-year university syllabi. It links to neighbouring topics Phase transitions, Superconductivity, so understanding it makes those chapters shorter.
In everyday life
Look for Peierls transition outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Peierls transition” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Peierls transition in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Peierls transition means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Peierls transition out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Peierls transition in simple terms?

A Peierls transition or Peierls distortion is a distortion of the periodic lattice of a one-dimensional crystal. Atomic positions oscillate, so that the perfect order of the 1-D crystal is broken.

Why does Peierls transition matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Peierls transition?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Peierls transition.

Tags

  • Phase transitions
  • Superconductivity

Keep exploring