ArticleslgStudy

mathematics

Penman equation

Penman equation is a mathematics topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Penman equation rather than just read about it. In short: The Penman equation describes evaporation (E) from an open water surface, and was developed by Howard Penman in 1948. Penman's equation requires daily mean temperature, wind speed, air pressure, and solar radiation to predict E.

Key takeaways

  • Penman equation belongs to mathematics; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Penman equation to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Penman equation from memory before moving on to harder problems.

Reference excerpt

The Penman equation describes evaporation (E) from an open water surface, and was developed by Howard Penman in 1948. Penman's equation requires daily mean temperature, wind speed, air pressure, and solar radiation to predict E. Simpler Hydrometeorological equations continue to be used where obtaining such data is impractical, to give comparable results within specific contexts, e.g. humid vs arid climates.

Details Numerous variations of the Penman equation are used to estimate evaporation from water, and land. Specifically the Penman–Monteith equation refines weather based potential evapotranspiration (PET) estimates of vegetated land areas. It is widely regarded as one of the most accurate models, in terms of estimates. The original equation was developed by Howard Penman at the Rothamsted Experimental Station, Harpenden, UK. The equation for evaporation given by Penman is:

E m a s s = m R n + ρ a c p ( δ e ) g a λ v ( m + γ ) {\displaystyle E_{\mathrm {mass} }={\frac {mR_{n}+\rho _{a}c_{p}\left(\delta e\right)g_{a}}{\lambda _{v}\left(m+\gamma \right)}}}

where:

m = Slope of the saturation vapor pressure curve (Pa K−1) Rn = Net irradiance (W m−2) ρa = density of air (kg m−3) cp = heat capacity of air (J kg−1 K−1) δe = vapor pressure deficit (Pa) ga = momentum surface aerodynamic conductance (m s−1) λv = latent heat of vaporization (J kg−1) γ = psychrometric constant (Pa K−1) which (if the SI units in parentheses are used) will give the evaporation Emass in units of kg/(m2·s), kilograms of water evaporated every second for each square meter of area. Remove λ to obviate that this is fundamentally an energy balance. Replace λv with L to get familiar precipitation units ETvol, where Lv=λvρwater. This has units of m/s, or more commonly mm/day, because it is flux m3/s per m2=m/s. This equation assumes a daily time step so that net heat exchange with the ground is insignificant, and a unit area surrounded by similar open water or vegetation so that net heat & vapor exchange with the surrounding area cancels out. Some times people replace Rn with and A for total net available energy when a situation warrants account of additional heat fluxes. Temperature, wind speed, relative humidity impact the values of m, g, cp, ρ, and δe.

Shuttleworth (1993) In 1993, W.Jim Shuttleworth modified and adapted the Penman equation to use SI, which made calculating evaporation simpler. The resultant equation is:

E m a s s = m R n + γ ∗ 6.43 ( 1 + 0.536 ∗ U 2 ) δ e λ v ( m + γ ) {\displaystyle E_{\mathrm {mass} }={\frac {mR_{n}+\gamma *6.43\left(1+0.536*U_{2}\right)\delta e}{\lambda _{v}\left(m+\gamma \right)}}}

where:

Emass = Evaporation rate (mm day−1) m = Slope of the saturation vapor pressure curve (kPa K−1) Rn = Net irradiance (MJ m−2 day−1) γ = psychrometric constant = 0.0016286 ∗ P k P a λ v {\displaystyle {\frac {0.0016286*P_{kPa}}{\lambda _{v}}}} (kPa K−1) U2 = wind speed (m s−1) δe = vapor pressure deficit (kPa) λv = latent heat of vaporization (MJ kg−1)

… excerpt ends here. Continue reading the full article.

Worked examples

Example 1 — a first encounter with Penman equation

Start with the simplest possible case. Write down what Penman equation claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In mathematics, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Penman equation before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Penman equation ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Penman equation

In research
Penman equation appears in mathematics research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Penman equation in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Penman equation is common in secondary-school and first-year university syllabi. It links to neighbouring topics Agronomy, Equations, Hydrology, so understanding it makes those chapters shorter.
In everyday life
Look for Penman equation outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Penman equation in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Penman equation means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Penman equation out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Penman equation in simple terms?

The Penman equation describes evaporation (E) from an open water surface, and was developed by Howard Penman in 1948. Penman's equation requires daily mean temperature, wind speed, air pressure, and solar radiation to predict E.

Why does Penman equation matter?

Because it connects several mathematics ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Penman equation?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Penman equation.

Tags

  • Agronomy
  • Equations
  • Hydrology

Keep exploring