ArticleslgStudy

science

Phosphorus monoxide

Phosphorus monoxide is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Phosphorus monoxide rather than just read about it. In short: Phosphorus monoxide is an unstable radical inorganic compound with molecular formula PO. Phosphorus monoxide is notable as one of the few molecular compounds containing phosphorus that has been detected outside of Earth.

Phosphorus monoxide — main illustration
Phosphorus monoxide — illustration

Key takeaways

  • Phosphorus monoxide belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Phosphorus monoxide to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Phosphorus monoxide from memory before moving on to harder problems.

Reference excerpt

Phosphorus monoxide is an unstable radical inorganic compound with molecular formula PO. Phosphorus monoxide is notable as one of the few molecular compounds containing phosphorus that has been detected outside of Earth. Other phosphorus containing molecules found in space include PN, PC, PC2, HCP and PH3. It was detected in the circumstellar shell of VY Canis Majoris and in the star forming region catalogued as AFGL 5142. The compound has been found to have been initially produced in star-forming regions, and speculated to be carried by interstellar comets throughout outer space, including to the early Earth. Phosphorus monoxide plays a role in the phosphorescence of phosphorus.

Discovery In 1894 W. N. Hartley was the first to report an observation of ultraviolet emission from a phosphorus compound, that was later expanded on by Geuter. The source of the spectral lines and bands were known to be related to phosphorus, but the exact nature was unknown. In 1927 H. J. Emeléus and R. H. Purcell determined that the cause was a phosphorus oxide. But it was in 1921 that P. N. Ghosh and G. N. Ball determined that the oxide was phosphorus monoxide. Phosphorus monoxide is believed to be the most abundant phosphorus-containing molecule found in interstellar clouds. Phosphorus was identified as a cosmically abundant element in 1998 after researchers found a cosmic ratio of phosphorus to hydrogen (P/H) of about 3×10−7. Even with the prevalence of phosphorus in interstellar clouds, very few phosphorus bearing molecules had been identified and found in very few sources; phosphorus nitride, PN, and the free radical CP were found in a carbon rich envelope of IRC +10215 in 1987. This suggested that more phosphorus containing molecules had to be found in interstellar space. While examining the oxygen-rich shell of the supergiant star VY Canis Majoris (VY CMa) the presence of PO was detected. VY CMa was studied using the Submillimeter Telescope (SMT) of the Arizona Radio Observatory (ARO). The telescope was able to observe the rotational frequencies of PO. ARO's 10 m SMT was able to measure the rotational transitions of PO showing J=5.5→4.5 at 240 GHz and J=6.5→5.5 at 284 GHz toward the evolved star, each consisting of well-defined lambda-doublets. Since the detection of PO towards the envelope of the VY CMa supergiant in 2001, PO has been found in many more interstellar clouds and is found in abundance around oxygen-rich shells.

Formation PO is formed when phosphorus is burnt in oxygen or ozone. It is a transient molecule observed in hot flames, or can be condensed into noble gas matrix. PO can be formed in an inert gas matrix in the photolysis of P4S3O, a phosphorus oxysulfide. On Earth, phosphorus monoxide can be prepared for study by spraying phosphoric acid into a flame. Because commercial acetylene gas contains some phosphine, an oxy-acetylene flame will have weak PO emission bands in its spectrum also. In the flame, PO oxidises back to P4O10.

Reactions

Phosphorescence As white phosphorus oxidises it gives out a greenish-white glow. The glow happens as PO is oxidised by one of these reactions: PO + O• → PO2; or PO + O2 →PO2 + O•. The possible ways that PO appears in this process is by breakup of the P2O molecule which in turn may come from P4O.

Ligand Phosphorus monoxide can act as a ligand on transition elements such as molybdenum, ruthenium and osmium. The phosphorus forms a triple bond with the metal. The first to be discovered was on a nickel-tungsten cluster. The WNi2P2 cluster was oxidised by a peroxide to yield a μ3-coordination, where each phosphorus atom is bound to three metal atoms.

Properties

Bond Phosphorus monoxide is a free radical with phosphorus double bonded to oxygen with phosphorus having an unpaired valence electron. The bond order is about 1.8. The P=O bond in PO has a dissociation energy of 6.4 eV. The bond length of the PO double bond is 1.476 Å, and free PO shows an infrared vibrational frequency of 1220 cm−1 due to the stretching of the bond. The free radical nature of PO makes it highly reactive and unstable compared to other phosphorus oxides that have been further oxidized.

Spectrum The visible to ultraviolet spectrum of phosphorus monoxide has three important bands. There is a continuum band near 540 nm. The β-system near 324 nm is due to the D2Σ→2Π transition. The γ-system has bands near 246 nm due to a A2Σ→2Π transition. Peaks in this band occur at 230, 238, 246, 253, and 260 nm in the ultraviolet. All these bands can be emission, absorption, or fluorescence depending on the method of illumination and temperature. There is also a C'2Δ state. The γ-system band can be broken down into sub-bands based on the different vibrational transitions. (0,0), (0,1) and (1,0) are designations for the sub-bands produced by the transition between two vibration states, as the electronic transition occurs. Each of these contains eight series termed branches. These are oP12, P2, Q2, R2, P1, Q1, R1 and sR21.

Molecule The ionisation potential of PO is 8.39 eV. When ionised, PO forms the cation PO+. The adiabatic electron affinity of PO is 1.09 eV. On gaining an electron the PO− ion forms. re in the ground state is 1.4763735 Å. The dipole moment of the molecule is 1.88 D. The phosphorus atom has a slight positive charge calculated as 0.35 of the electron.

See also Nitric oxide Phosphorus mononitride

References

Illustrations

Phosphorus monoxide illustration
Phosphorus monoxide illustration

Worked examples

Example 1 — a first encounter with Phosphorus monoxide

Start with the simplest possible case. Write down what Phosphorus monoxide claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Phosphorus monoxide before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Phosphorus monoxide ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Phosphorus monoxide

In research
Phosphorus monoxide appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Phosphorus monoxide in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Phosphorus monoxide is common in secondary-school and first-year university syllabi. It links to neighbouring topics Free radicals, Phosphorus oxides, so understanding it makes those chapters shorter.
In everyday life
Look for Phosphorus monoxide outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Phosphorus monoxide” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Phosphorus monoxide in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Phosphorus monoxide means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Phosphorus monoxide out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Phosphorus monoxide in simple terms?

Phosphorus monoxide is an unstable radical inorganic compound with molecular formula PO. Phosphorus monoxide is notable as one of the few molecular compounds containing phosphorus that has been detected outside of Earth.

Why does Phosphorus monoxide matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Phosphorus monoxide?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Phosphorus monoxide.

Tags

  • Free radicals
  • Phosphorus oxides

Keep exploring