ArticleslgStudy

science

Plasma osmolality

Plasma osmolality is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Plasma osmolality rather than just read about it. In short: Plasma osmolality measures the body's electrolyte–water balance. There are several methods for arriving at this quantity through measurement or calculation.

Key takeaways

  • Plasma osmolality belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Plasma osmolality to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Plasma osmolality from memory before moving on to harder problems.

Reference excerpt

Plasma osmolality measures the body's electrolyte–water balance. There are several methods for arriving at this quantity through measurement or calculation. Osmolality and osmolarity are measures that are technically different, but functionally the same for normal use. Whereas osmolality (with an "l") is defined as the number of osmoles (Osm) of solute per kilogram of solvent (osmol/kg or Osm/kg), osmolarity (with an "r") is defined as the number of osmoles of solute per liter (L) of solution (osmol/L or Osm/L). As such, larger numbers indicate a greater concentration of solutes in the plasma.

Measured osmolality (MO) Osmolality can be measured on an analytical instrument called an osmometer. It works on the method of depression of freezing point.

Osmolality versus osmolarity Osmolarity is affected by changes in water content, as well as temperature and pressure. In contrast, osmolality is independent of temperature and pressure. For a given solution, osmolarity is slightly less than osmolality, because the total solvent weight (the divisor used for osmolality) excludes the weight of any solutes, whereas the total solution volume (used for osmolarity) includes solute content. Otherwise, one litre of plasma would be equivalent to one kilogram of plasma, and plasma osmolarity and plasma osmolality would be equal. However, at low concentrations (below about 500 mM), the mass of the solute is negligible compared to the mass of the solvent, and osmolarity and osmolality are very similar. Technically, the terms can be compared as follows:

Therefore, bedside calculations are actually in units of osmolarity, whereas laboratory measurements will provide readings in units of osmolality. In practice, there is almost negligible difference between the absolute values of the different measurements. For this reason, both terms are often used interchangeably, even though they refer to different units of measurement.

Ranges

Human Normal human reference range of osmolality in plasma is about 275-299 milli-osmoles per kilogram.

Nonhuman Plasma osmolarity of some reptiles, especial those from a freshwater aquatic environment, may be lower than that of mammals (e.g. < 260 mOsm/L) during favourable conditions. Consequently, solutions osmotically balanced for mammals (e.g., 0.9% normal saline) are likely to be mildly hypertonic for such animals. Many arid species of reptiles and hibernating uricotelic species allow major elevations of plasma osmolarity (e.g. > 400 mOsm/L) that could be fatal to some mammals. Deep-sea fish have adapted to the extreme hydrostatic pressures of depth through a number of factors, including increasing osmolality, with one of the deepest known fish in the world, the hadal snailfish (Notoliparis kermadecensis) having a recorded muscle osmolality of 991 ± 22 mOsmol/kg, almost four times the osmolality of mammals and three times that of shallow water fish species (typically 350 mOsmol/kg).

Clinical relevance As cell membranes in general are freely permeable to water, the osmolality of the extracellular fluid (ECF) is approximately equal to that of the intracellular fluid (ICF). Therefore, plasma osmolality is a guide to intracellular osmolality. This is important, as it shows that changes in ECF osmolality have a great effect on ICF osmolality — changes that can cause problems with normal cell functioning and volume. If the ECF were to become too hypotonic, water would readily fill surrounding cells, increasing their volume and potentially lysing them (cytolysis). Many poisons, medications and diseases affect the balance between the ICF and ECF, affecting individual cells and homeostasis as a whole. Osmolality of blood increases with dehydration and decreases with overhydration. In normal people, increased osmolality in the blood will stimulate secretion of antidiuretic hormone (ADH). This will result in increased water reabsorption, more concentrated urine, and less concentrated blood plasma. A low serum osmolality will suppress the release of ADH, resulting in decreased water reabsorption and more concentrated plasma. Syndrome of inappropriate ADH secretion occurs when excessive release of antidiuretic hormone results in inappropriately elevated urine osmolality (>100 mOsmol/L) relative to the blood plasma, leading to hyponatraemia. This ADH secretion may occur in excessive amounts from the posterior pituitary gland, or from ectopic sources such as small-cell carcinoma of the lung. Elevation may be associated with stroke mortality.

Calculated osmolarity (CO) In medical lab reports, this quantity often appears as "Osmo, Calc" or "Osmo (Calc)." According to the international SI unit use the following equation : Calculated osmolarity = 2 Na + Glucose + Urea (all in mmol/L) As Na+ is the major extracellular cation, the sum of osmolarity of all other anions can be assumed to be equal to natremia, hence [Na+]x2 ≈ [Na+] + [anions] To calculate plasma osmolality use the following equation (typical in the US):

= 2[Na+] + [Glucose]/18 + [ BUN ]/2.8 where [Glucose] and [BUN] are measured in mg/dL. If the patient has ingested ethanol, the ethanol level should be included in the calculated osmolarity:

= 2[Na+] + [Glucose]/18 + [ BUN ]/2.8 + [Ethanol]/3.7 Based on the molecular weight of ethanol the divisor should be 4.6 but empiric data shows that ethanol does not behave as an ideal osmole.

Osmolar gap (OG)

… excerpt ends here. Continue reading the full article.

Worked examples

Example 1 — a first encounter with Plasma osmolality

Start with the simplest possible case. Write down what Plasma osmolality claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Plasma osmolality before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Plasma osmolality ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Plasma osmolality

In research
Plasma osmolality appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Plasma osmolality in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Plasma osmolality is common in secondary-school and first-year university syllabi. It links to neighbouring topics Blood tests, so understanding it makes those chapters shorter.
In everyday life
Look for Plasma osmolality outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Plasma osmolality” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Plasma osmolality in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Plasma osmolality means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Plasma osmolality out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Plasma osmolality in simple terms?

Plasma osmolality measures the body's electrolyte–water balance. There are several methods for arriving at this quantity through measurement or calculation.

Why does Plasma osmolality matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Plasma osmolality?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Plasma osmolality.

Tags

  • Blood tests

Keep exploring