A nuclear reactor is a device used to sustain a controlled fission nuclear chain reaction. They are used for commercial electricity, marine propulsion, weapons production, and research. Fissile nuclei (primarily uranium-235 or plutonium-239) absorb single neutrons and split, releasing energy and multiple neutrons, which can induce further fission. Reactors stabilize this, regulating neutron absorbers and moderators in the core. Fuel efficiency is exceptionally high; low-enriched uranium is 120,000 times more energy-dense than coal. Heat from nuclear fission is passed to a working fluid coolant. In commercial reactors, this drives turbines and electrical generator shafts. Some reactors are used for district heating, and isotope production for medical and industrial use. After the discovery of fission in 1938, many countries launched military nuclear research programs. Early subcritical experiments probed neutronics. In 1942, the first artificial critical nuclear reactor, Chicago Pile-1, was built by the Metallurgical Laboratory. From 1944, for weapons production, the first large-scale reactors were operated at the Hanford Site. The pressurized water reactor design, used in about 70% of commercial reactors, was developed for US Navy submarine propulsion, beginning with S1W in 1953. In 1954, small-scale nuclear electricity production began with the Soviet Obninsk plant. The first commercial nuclear power station was Calder Hall at Sellafield, England, which started operation in 1956. Spent fuel can be reprocessed, potentially reducing nuclear waste and recovering reactor-usable fuel. This also poses a nuclear proliferation risk via production of plutonium for nuclear weapons. Reactor accidents have been caused by combinations of design and operator failure. The 1979 Three Mile Island accident, at INES Level 5, and the 1986 Chernobyl and 2011 Fukushima disasters, both at Level 7, had major effects on the nuclear industry and anti-nuclear movement. As of 2025, there are 417 commercial reactors, 226 research reactors, and over 200 marine propulsion reactors in operation globally. Commercial reactors provide 9% of the global electricity supply, compared to 30% from renewables, together comprising low-carbon electricity. Almost 90% of this comes from pressurized and boiling water reactors. Other designs include gas-cooled, fast-spectrum, breeder, heavy-water, molten-salt, and small modular, each of which improves safety, efficiency, cost, fuel type, enrichment, or burnup, and the now-obsolete Light water graphite reactor.
Terminology During early 1940s nuclear research, the phrase "atomic pile" was used to refer to any assembly involving uranium and attempts at neutron multiplication, most of which were subcritical. After Chicago Pile-1 demonstrated a self-sustaining chain reaction, the "reactor" terminology became more common. The phrases "nuclear pile" and "atomic reactor" were also common. Critical mass experiments, while being far simpler, are sometimes referred to as research reactors, such as the Godiva device. The term "nuclear reactor" is predominantly used to refer to nuclear fission reactors. It can also refer to a nuclear fusion reactor, of which only net negative power systems have been constructed. Radioisotope thermoelectric generators and radioisotope heater units, while deriving power from nuclear decay reactions, are not referred to as nuclear reactors as they do not induce reactions.
Operation
Just as conventional thermal power stations generate electricity by harnessing the thermal energy released from burning fossil fuels, nuclear reactors convert the energy released by controlled nuclear fission into thermal energy for further conversion to mechanical or electrical forms.
Fission
When a large fissile atomic nucleus such as uranium-235, uranium-233, or plutonium-239 absorbs a neutron, it may undergo nuclear fission. The heavy nucleus splits into two or more lighter nuclei (the fission products), releasing kinetic energy, gamma radiation, and free neutrons. A portion of these neutrons may be absorbed by other fissile atoms and trigger further fission events, which release more neutrons, and so on. This is known as a nuclear chain reaction. To control such a nuclear chain reaction, control rods containing neutron poisons and neutron moderators are able to change the portion of neutrons that will go on to cause more fission. Nuclear reactors generally have automatic and manual systems to shut the fission reaction down if monitoring or instrumentation detects unsafe conditions.
Heat generation The reactor core generates heat in several ways:
The kinetic energy of fission products is converted to thermal energy when these nuclei collide with nearby atoms. The reactor absorbs some of the gamma rays produced during fission and converts their energy into heat. Heat is produced by the radioactive decay of fission products and materials that have been activated by neutron absorption. This decay heat source will remain for some time even after the reactor is shut down. A kilogram of uranium-235 (U-235) converted via nuclear processes releases approximately three million times more energy than a kilogram of coal burned conventionally (7.2 × 1013 joules per kilogram of uranium-235 versus 2.4 × 107 joules per kilogram of coal). The fission of one kilogram of uranium-235 releases about 19 billion kilocalories, so the energy released by 1 kg of uranium-235 corresponds to that released by burning 2.7 million kg of coal.
Cooling A nuclear reactor coolant – usually water but sometimes a gas or a liquid metal (like liquid sodium or lead) or molten salt – is circulated past the reactor core to absorb the heat that it generates. The heat is carried away from the reactor and is then used to generate steam. Most reactor systems employ a cooling system that is physically separated from the water that will be boiled to produce pressurized steam for the turbines, like the pressurized water reactor. However, in some reactors the water for the steam turbines is boiled directly by the reactor core – for example, the boiling water reactor.
Reactivity control
… excerpt ends here. Continue reading the full article.
