ArticleslgStudy

physics

Prism cover test

Prism cover test is a physics topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Prism cover test rather than just read about it. In short: The prism cover test (PCT) is an objective measurement and the gold standard in measuring strabismus, i.e. ocular misalignment, or a deviation of the eye. It is used by ophthalmologists, orthoptists, and optometrists in order to measure the vertical and horizontal deviation and includes both manifest and latent components.

Prism cover test — main illustration
Prism cover test — illustration

Key takeaways

  • Prism cover test belongs to physics; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Prism cover test to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Prism cover test from memory before moving on to harder problems.

Reference excerpt

The prism cover test (PCT) is an objective measurement and the gold standard in measuring strabismus, i.e. ocular misalignment, or a deviation of the eye. It is used by ophthalmologists, orthoptists, and optometrists in order to measure the vertical and horizontal deviation and includes both manifest and latent components. Manifest is defined by the eye deviating constantly or intermittently, whereas latent is where the deviation is normally controlled but becomes present when the eyes are dissociated. A PCT reveals the total deviation and cannot distinguish between latent and manifest strabismus as you are using an alternate cover test. A number of different instruments are required when performing a PCT.

Horizontal and vertical prism bars (or loose prisms). An occluder Near accommodative target. For example, near fixation stick Distance target. For example, most commonly a Snellen chart is utilised, however the LogMAR chart is preferred as it has letters of equal legibility, same numbers of letters on each row and uniform spacing between letters and rows This compared to the Snellen Chart which has 'poor reproducibility and reliability' In order to perform a PCT, you must first perform a cover test as this gives an estimation of the size of the strabismus, thus an approximate starting point on the prism bar. You can also get an indication of presence and type of strabismus by observing the patients' eye and observing corneal reflections, also known as Hirschbergs. It also shows whether the patient has a manifest or latent deviation. If a manifest deviation is present, it reveals which eye has the deviation or if it is alternating between both eyes.

Indicated in Patients with manifest and latent strabismus Patients with concomitant and incomitant deviations Horizontal and vertical deviations Patients with good fixation, visual acuity and cooperation For accurate (within two prism dioptres) numerical recording that will provide a point of reference for future consultations Monitoring the efficacy of various noninvasive treatments and also surgery interventions

Not indicated in Cyclotropias or torsional deviations Patients with eccentric fixation because the movement of the deviating eye stops when the stimulus falls on the eccentric retinal area used for fixation and not on the fovea Patients that do not have simultaneous perception Patients that have difficulty with nystagmus Unreliable deviations greater than eighty prism dioptres

Advantages Provides complete dissociation that gives the maximum angle of deviation Provides a comparison of distance and near deviations

Disadvantages Can not be used in all types of deviations as above in 'Not indicated in'

Method The prism cover test must be conducted at near (33 cm), at distance (6m) and if necessary at greater than 6 metres. Before commencing the test, ensure the patient is sitting upright with their chin and head straight. Patients with a head tilt (abnormal head posture) are 'not formally controlled by using a bite bar or chin rest' and are always tested with their head tilt and then without their head tilt The results leading on from the cover test will give you an indication of the type of deviation and which way you should hold your prism for the next stage of the test. Either BASE IN for an exodeviation (eye turned out), BASE OUT for an esodeviation (eye turned in), BASE UP for a hypodeviation (eye turned down) or BASE DOWN for a hyperdeviation (eye turned up). Steps: 1. The patient should be measured in primary position first and then in any other positions of gaze of concern. For near fixation, the patient should hold an accommodative target (fixation stick) at 33 cm, ensuring it is in line with their visual axis. By having the patient read out loud the letters at the top of the fixation stick, it is easy to ensure they are maintaining their accommodation. 2. The examiner then holds the prism bar over the patients deviating eye, starting at a small strength prism, however, if the deviation on the cover test appeared to be large, a larger strength prism may be used to achieve results quicker. 3. With the prism present, an alternate cover test is performed. It is important that an alternate cover test is performed correctly in order to ensure maximum dissociation as we are determining the total deviation size which includes both latent and manifest. Note: It is important to ensure the patient maintains good fixation, by continuing to look at the near fixation stick. 4. As the alternate cover test is performed, the examiner watches the patients eye for movement. If movement is seen, the prism bar is moved to increase the power. If the 'deviation exceeds 50 prism dioptres, such that a single prism bar cannot be used', prisms can either be stacked or split 5. Prism strength is increased until the eye under the prism produces no movement, meaning the deviation is neutralised. 6. To confirm neutralisation the next prism of increasing strength should produce a movement in the opposite direction indicating overcorrection. 7. Once the results for the near PCT have been recorded, the procedure should be repeated at 6m with the Snellen chart and if needed at greater than 6m by patient fixating out the window. 8. Continue the test until neutralisation has been established.

Recording The PCT recordings assist in classification and diagnosis of specific strabismic conditions by comparing the size of the deviation from near to distance and also in other various positions of gaze. When recording the results obtained on a PCT it must be noted:

If correction (glasses or contact lenses) was worn at the time of measurement The fixation distance where the prism neutralised the deviation. That way we can gain an understanding as to whether it increases or decreases in size in different positions of gaze and therefore make a diagnosis of whether it is a concomitant or incomitant deviation. The prism base utilised. For example, Base in (BI), Base out (BO), Base up (BU) or Base down (BD). The angle of the deviation with the units in prism dioptres Which eye is fixating and which eye is deviating Whether the test was performed with or without an abnormal head posture

Examples of recording PCT cc (D) 12 p.d BI 6 p.d BU (FL) (N) 18 p.d BI 6 p.d BU (FL)

or

PCT cc (D) 12 p.d BI R/L 6 p.d (FR&L) (N) 18 p.d BI R/L 6 p.d (FR&L)

… excerpt ends here. Continue reading the full article.

Worked examples

Example 1 — a first encounter with Prism cover test

Start with the simplest possible case. Write down what Prism cover test claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In physics, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Prism cover test before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Prism cover test ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Prism cover test

In research
Prism cover test appears in physics research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Prism cover test in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Prism cover test is common in secondary-school and first-year university syllabi. It links to neighbouring topics Diagnostic ophthalmology, Physical examination, so understanding it makes those chapters shorter.
In everyday life
Look for Prism cover test outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Prism cover test” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Prism cover test in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Prism cover test means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Prism cover test out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Prism cover test in simple terms?

The prism cover test (PCT) is an objective measurement and the gold standard in measuring strabismus, i.e. ocular misalignment, or a deviation of the eye. It is used by ophthalmologists, orthoptists, and optometrists in order to measure the vertical and horizontal deviation and includes both manife…

Why does Prism cover test matter?

Because it connects several physics ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Prism cover test?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Prism cover test.

Tags

  • Diagnostic ophthalmology
  • Physical examination

Keep exploring