ArticleslgStudy

engineering

Prussia Columns

Prussia Columns is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Prussia Columns rather than just read about it. In short: The Prussia Columns (German: Preußensäulen) are two monuments, over 15 metres (49 ft) high, that were erected in the years 1854 and 1855 by order of the Prussian king, Frederick William IV on the southeast coast of the German island of Rügen near Neukamp and Groß Stresow. Both villages are today part of the municipality of Putbus.

Prussia Columns — main illustration
Prussia Columns — illustration

Key takeaways

  • Prussia Columns belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Prussia Columns to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Prussia Columns from memory before moving on to harder problems.

Reference excerpt

The Prussia Columns (German: Preußensäulen) are two monuments, over 15 metres (49 ft) high, that were erected in the years 1854 and 1855 by order of the Prussian king, Frederick William IV on the southeast coast of the German island of Rügen near Neukamp and Groß Stresow. Both villages are today part of the municipality of Putbus. The monument near Neukamp was inaugurated on 15 October 1854 and the one near Groß Stresow exactly one year later, on the 60th birthday of Frederick William IV. The drums and parts of the pedestal were carved from one of the largest glacial erratics on and around Rügen, the Great Rock near Nardevitz on Rügen's Jasmund peninsula. Most of the rock was destroyed as a result of being quarried for the columns. Nevertheless, it is still impressive today, and sticks 3 metres out of the ground. The monuments were intended to commemorate the landings of the Brandenburg and later, Prussian troops on the island in the years 1678 and 1715 and to demonstrate Prussia's claim to power over the southern Baltic Sea region. The island of Rügen, which had belonged to Swedish Pomerania since the Treaty of Westphalia in 1648, was on each occasion briefly wrested from Swedish rule as a result of the invasions, but then returned to Sweden as a result of subsequent peace agreements.

Historical background

Neukamp

During the Swedish-Brandenburg War (1674–1679) Frederick William, the "Great Elector" of Brandenburg, allied with the Danish king, Christian V, conquered the island in September 1678 in the invasion of Rügen. The Danes landed under the command of Admiral Nils Juel on 13 September 1678 on the Wittow peninsula and, after driving off the weak Swedish garrison on Wittow to the Schaabe near present-day Juliusruh, erected earthworks that are still well preserved today (by the village sign and coming from the south). The Great Elector landed on the same day on the southeast shore of Rügen near Neukamp with the Brandenburg troops (7,000–8,000 men) under the command of General Field Marshal Derfflinger. He had approached from Greifswald through the Greifswalder Bodden with his fleet comprising 350 sailing ships and 150 rowing boats. The Swedes entrenched there were quickly forced back via Altefähr to Stralsund and Stralsund itself was also captured on 12 October 1678. The entrenchment near Neukamp is well preserved and is located just behind the monument. Following the Treaty of Saint-Germain on 29 June 1679 Brandenburg-Western Pomerania, including Rügen, was returned to Sweden.

Groß Stresow

In the course of the Great Northern War (1700–1721), the Prussian king, Frederick William I, allied with the Danish king, Frederick IV, landed on 15 November 1715 with his forces (20,000–24,000 men) commanded by the Old Dessauer near Groß Stresow. They drove the Swedes, led by their king, Charles XII, from the island of Rügen over the Strelasund to Stralsund, which had been besieged for a long time by the Danes and Prussians, but had hitherto received Swedish supplies through Rügen. After further siege operations the Swedes trapped in the town of Stralsund gave themselves up on 23 December 1715, Charles XII only escaping in a fishing boat across the Baltic Sea. Despite their victory, Prussia had to cede the island to Sweden as part of the peace treaty of 14 August 1719.

Erection of the monuments The designs for the monuments ordained by Frederick William IV were produced by the architect, Friedrich August Stüler. The sculptor, Wilhelm Stürmer, carved the statues on top of the columns. The statues are each about 3.4 metres (11 ft) high and, like the capitals, are made of Saxon sandstone, standing atop the granite columns. The total cost was 6,815 Reichstalers.

Recent history to the present

In 1985, i.e. 130 years after the erection of the monuments, experts from the Dresden Office for Monument Conservation (VEB Denkmalpflege Dresden) questioned the structural stability of the columns during an inspection. Five years later, following an emergency meeting on 11 September 1990 in Putbus, a Berlin master stonemason and restorer was contracted to remove both monuments. In late November 1991, the monuments were dismantled and their drums, capitals and statues transported to the master stonemason's workshop in Berlin-Pankow. Originally replicas of the drums, capitals and statues were to be made, because the advice had been not to repair them due to the severe damage to the original stone. The drums had once been joined together by means of iron pins. Serious corrosion of these jointing pins over many decades had caused the granite to split in places, which meant there had been a danger of the columns collapsing as result of the formation of cracks and fissures. The statues, too, were so badly eroded by weathering and lightning strikes, that their outline had been destroyed for ever. The material to be used for any replicas - i.e. Elbe Sandstone for the capitals and statues and Bornholm granite, of which the Nardevitz Erratic was also made, for the column drums weighing six and five tons respectively - would be readily obtainable. Further damage occurred during disassembly. The commissioned stonemason used percussion drills to get the iron pins out that held the pieces of the granite together. In doing so, large pieces at the respective ends of the drums were broken off. The drilling holes at each end of the drums show this clearly. The journey to Berlin was did not go smoothly either. The statue of Frederick William I from Great Stresow broke off at the legs. The head came off and was glued back by the master stonemason. Due to the continuing shortage of money in the district of Rügen, which was the owner of the monuments, little work was carried out in the following years, with the exception of the completion of a capital. One of the factors in this situation was, for example, the fact that in allocating funds, the making of replicas had a lower priority over the restoration of original monuments.

… excerpt ends here. Continue reading the full article.

Illustrations

Prussia Columns: Prussia column near Groß Stresow in July 1984
Prussia column near Groß Stresow in July 1984
Prussia Columns: Prussia Column near Groß Stresow in July 1989
Prussia Column near Groß Stresow in July 1989
Prussia Columns: Pedestal of the Prussia Column of 1855 near Groß Stresow - re-erected in October 2004
Pedestal of the Prussia Column of 1855 near Groß Stresow - re-erected in October 2004
Prussia Columns: Information board on the site of the original pieces of the Prussia Columns in Alleestraße in Putbus
Information board on the site of the original pieces of the Prussia Columns in Alleestraße in Putbus
Prussia Columns: Pieces of the pedestal near Neukamp in August 2006
Pieces of the pedestal near Neukamp in August 2006

Worked examples

Example 1 — a first encounter with Prussia Columns

Start with the simplest possible case. Write down what Prussia Columns claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Prussia Columns before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Prussia Columns ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Prussia Columns

In research
Prussia Columns appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Prussia Columns in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Prussia Columns is common in secondary-school and first-year university syllabi. It links to neighbouring topics Buildings and structures completed in 1854, Buildings and structures completed in 1855, Buildings and structures in Vorpommern-Rügen, so understanding it makes those chapters shorter.
In everyday life
Look for Prussia Columns outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Prussia Columns” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Prussia Columns in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Prussia Columns means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Prussia Columns out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Prussia Columns in simple terms?

The Prussia Columns (German: Preußensäulen) are two monuments, over 15 metres (49 ft) high, that were erected in the years 1854 and 1855 by order of the Prussian king, Frederick William IV on the southeast coast of the German island of Rügen near Neukamp and Groß Stresow. Both villages are today pa…

Why does Prussia Columns matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Prussia Columns?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Prussia Columns.

Tags

  • Buildings and structures completed in 1854
  • Buildings and structures completed in 1855
  • Buildings and structures in Vorpommern-Rügen
  • Monumental columns
  • Monuments and memorials in Germany
  • Outdoor sculptures in Germany
  • Putbus
  • Rügen
  • Statues in Germany

Keep exploring