ArticleslgStudy

engineering

Queen Anne Pool

Queen Anne Pool is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Queen Anne Pool rather than just read about it. In short: The Queen Anne Pool (also known as the Queen Anne Aquatic Center) is a public pool in the Queen Anne neighborhood of Seattle, Washington, United States. Funded by the Forward Thrust initiatives in 1968, the pool construction was delayed for years in deliberations over funding and location.

Queen Anne Pool — main illustration
Queen Anne Pool — illustration

Key takeaways

  • Queen Anne Pool belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Queen Anne Pool to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Queen Anne Pool from memory before moving on to harder problems.

Reference excerpt

The Queen Anne Pool (also known as the Queen Anne Aquatic Center) is a public pool in the Queen Anne neighborhood of Seattle, Washington, United States. Funded by the Forward Thrust initiatives in 1968, the pool construction was delayed for years in deliberations over funding and location. After ten houses adjacent to the McClure Middle School were purchased by the city recreation fund, in 1974 local architect Benjamin F. McAdoo was selected to design the structure. Construction began on the site two years later; the project exceeded the construction firm's initial bid, for a total cost of $843,000 (equivalent to $4,800,000 in 2025). It was opened to the public on November 10, 1977, and dedicated by Mayor Wesley C. Uhlman eleven days later. The pool building is T-shaped, with the pool located in the leg of the T, away from the street. It is fashioned from reinforced concrete with a brick veneer and features an asymmetrical red roof. It was designed in Modernist style, featuring trademark details in the interior such as exposed concrete wall, brickwork, and support beams. The pool itself, measuring 75 by 43 ft (23 by 13 m), features one-meter and three-meter diving platforms, a rope swing, and a pool lift. A sauna is also located within the facility. Today, Queen Anne Pool is used for local recreational swimming, provides lessons, and hosts daily family and lap swims. In addition, the pool serves as the practice facility and home pool of the Lincoln High School boys' and girls' swim and dive teams during their respective athletic seasons.

History In 1968, King County voters approved Forward Thrust, a series of bond ballot initiatives to fund various improvements in Seattle and the surrounding King County. Park and recreation improvements in Seattle were funded by $65,000,000 (equivalent to $601,800,000 in 2025) in bonds, with almost 200 distinct recreation projects included within the program. This included a set of seven public pools: Medgar Evers Pool, Capt. William R. Ballard, Helene Madison, Rainier Beach, Meadowbrook, Sealth, and Queen Anne. The legislation specified that all of these pools were to be constructed in the vicinity of high schools. While the Queen Anne Pool was initially planned to be among the first pools constructed under the Forward Thrust program, it was the only pool that was not completed or under construction by 1975. The pool's construction was first delayed in 1972 due to high property costs in Queen Anne and a lack of open space. No suitable pool locations were available in the area around Queen Anne High School due to a lack of open space and high property values, prompting Park Superintendent Hans Thompson to suggest a location adjacent to McClure Middle School, a proposal supported by local community organizations. This was opposed by residents in Magnolia, who advocated for a location in the Interbay neighborhood, situated between Queen Anne and Magnolia. A location on the Seattle Pacific College campus was also proposed, but rejected. After public debate and delays from deliberations over whether the bond allowed the proposed locations, the City Council's Parks Committee chose the site adjacent to McClure in late 1973. As the bond program only funded the construction of the pool and not the resulting land acquisition, arrangements were made with the Seattle City Council and Seattle Public Schools to help fund the latter. Following an early 1973 environmental survey, ten houses situated on the site were purchased through a $325,000 (equivalent to $3,000,000 in 2025) payment by the Parks and Recreation Fund. The Forward Thrust pools had a variety of architectural styles and influences, with others having been constructed in Brutalist and New Formalist styles. In November 1974, African-American architect Benjamin F. McAdoo, a specialist in Modernist and Northwest Regional styles, was selected to design the structure. McAdoo had previously focused on designing private residences, but had shifted towards civic commissions after returning to Seattle in 1964. Donald Harris, of the Seattle Parks Department, was appointed the project's manager. He was later replaced in favor of Dave Buchan, adding several months of delay to the pool's construction. After bidding, Frodesen & Associates was selected as the construction firm after a low bid of $764,000 (equivalent to $5,000,000 in 2025). Frodesen & Associates began work on the site in July 1976; their costs went on to exceed their initial bid for a total cost of $843,000 (equivalent to $4,800,000 in 2025). While the opening date was planned for November 9, 1977, it was delayed by one day after a faulty thermostat overheated the pool to 100 °F (38 °C), far exceeding the intended temperature of 84 °F (29 °C). Seattle Mayor Wesley C. Uhlman officially dedicated the pool on November 21, 1977. In August 1978, the pool was closed for over a month to be dried and dampproofed, due to humidity damaging the brickwork and turning the building white; dampproofing was only partially applied during construction. The Seattle Landmarks Preservation Board chose to designate the pool a Seattle Landmark in May 2024.

Site and structure

The Queen Anne Pool sits near the center of the Queen Anne neighborhood of Seattle, on a block bounded by Queen Anne Avenue N. to its east and 1st Avenue W. to its west, which separates the pool from McClure Middle School, Queen Anne Playfield, and the Queen Anne Community Center. Raised grassy berms to the north and south of the building, trees to the northeast and northwest, and flower beds on all sides shield the structure and blend it into the surrounding area, which mainly consists of single-family houses. A 50 ft (15 m) wide concrete walkway featuring concrete bollards and a bike rack connect the building to the street and the crosswalk to the middle school. It is located near the top of Queen Anne Hill, at an elevation of 380 feet (120 m).

… excerpt ends here. Continue reading the full article.

Illustrations

Queen Anne Pool illustration
Queen Anne Pool: Swimmers at the pool, 2013
Swimmers at the pool, 2013

Worked examples

Example 1 — a first encounter with Queen Anne Pool

Start with the simplest possible case. Write down what Queen Anne Pool claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Queen Anne Pool before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Queen Anne Pool ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Queen Anne Pool

In research
Queen Anne Pool appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Queen Anne Pool in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Queen Anne Pool is common in secondary-school and first-year university syllabi. It links to neighbouring topics 1977 establishments in Washington (state), Buildings and structures completed in 1977, Buildings and structures in Queen Anne, Seattle, so understanding it makes those chapters shorter.
In everyday life
Look for Queen Anne Pool outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Queen Anne Pool in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Queen Anne Pool means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Queen Anne Pool out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Queen Anne Pool in simple terms?

The Queen Anne Pool (also known as the Queen Anne Aquatic Center) is a public pool in the Queen Anne neighborhood of Seattle, Washington, United States. Funded by the Forward Thrust initiatives in 1968, the pool construction was delayed for years in deliberations over funding and location.

Why does Queen Anne Pool matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Queen Anne Pool?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Queen Anne Pool.

Tags

  • 1977 establishments in Washington (state)
  • Buildings and structures completed in 1977
  • Buildings and structures in Queen Anne, Seattle
  • Landmarks in Seattle
  • Swimming venues in the United States

Keep exploring