ArticleslgStudy

engineering

Rabbit-proof fence

Rabbit-proof fence is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Rabbit-proof fence rather than just read about it. In short: The State Barrier Fence, formerly known as the Rabbit-Proof Fence, the State Vermin Barrier Fence, and the Emu Fence, is a series of pest-exclusion fences originally constructed between 1902 and 1907 to keep rabbits and other agricultural pests from entering Western Australia from the east. There are three fences in Western Australia: the original No. 1 Fence crosses the state from north to south, No. 2 Fence is sma…

Rabbit-proof fence — main illustration
Rabbit-proof fence — illustration

Key takeaways

  • Rabbit-proof fence belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Rabbit-proof fence to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Rabbit-proof fence from memory before moving on to harder problems.

Reference excerpt

The State Barrier Fence, formerly known as the Rabbit-Proof Fence, the State Vermin Barrier Fence, and the Emu Fence, is a series of pest-exclusion fences originally constructed between 1902 and 1907 to keep rabbits and other agricultural pests from entering Western Australia from the east. There are three fences in Western Australia: the original No. 1 Fence crosses the state from north to south, No. 2 Fence is smaller and further west, and No. 3 Fence is smaller still and runs east–west. The fences took six years to build. When completed, the rabbit-proof fence (including all three fences) stretched 3,256 kilometres (2,023 mi). The cost to build each kilometre of fence at the time was about $250 (equivalent to $42,000 in 2022). When it was completed in 1907, the 1,833-kilometre (1,139 mi) No. 1 Fence was the longest unbroken fence in the world.

History

Rabbits were introduced to Australia by the First Fleet in 1788. They became a problem after October 1859, when Thomas Austin released 24 wild rabbits from England for hunting purposes, believing "The introduction of a few rabbits could do little harm and might provide a touch of home, in addition to a spot of hunting." With virtually no local predators, the rabbits became extremely prolific and spread rapidly across the southern parts of the country. Australia had ideal conditions for an explosion in the rabbit population, which constituted an invasive species. By 1887, agricultural losses from rabbit damage compelled the New South Wales Government to offer a £25,000 reward (equivalent to $3,900,000 in 2022) for "any method of success not previously known in the Colony for the effectual extermination of rabbits". A Royal Commission was held in 1901 to investigate the situation. It determined to build a pest-exclusion fence.

Construction

The fence posts are placed 12 ft (3.7 m) apart and have a minimum diameter of 4 in (100 mm). There were initially three wires of 12+1⁄2 gauge, strung 4 in (102 mm), 1 ft 8 in (0.5 m), and 3 ft (0.9 m) above ground, with a barbed wire added later at 3 ft 4 in (1.02 m) and a plain wire at 3 ft 7 in (1.1 m). To make the fence a barrier against dingoes and foxes as well, wire netting extending 6 in (150 mm) below ground, was attached to the wire. The fence was constructed with a variety of materials, according to the local climate and availability of wood. At first, fence posts were made from salmon gum and gimlet, but they attracted termites (locally known as white ants) and had to be replaced. Split white gum was one of the best types of wood used in the fence. Other timbers used were mulga, wodjil, native pine, and tea-tree, depending on local availability. Iron posts were used where there was no wood. Most materials had to be hauled hundreds of kilometres from rail heads and ports by bullock, mule and camel teams. From 1901, the fence was constructed by private contractors. In 1904, the project became the responsibility of the Public Works Department of Western Australia, under the supervision of Richard John Anketell. With a workforce of 120 men, 350 camels, 210 horses and 41 donkeys, Anketell was responsible for the construction of the greater part of No. 1 Fence and the survey of its last 70 miles (110 km).

Maintenance

Alexander Crawford took over the maintenance of the fence from Anketell as each section was finished; he was in charge until he retired in 1922. The area inside the fence to the west became known as "Crawford's Paddock". The fence was maintained at first by boundary riders riding bicycles and later by riders astride camels. However, fence inspection was difficult from atop the tall animal. In 1910, a car was bought for fence inspection, but it was subject to punctured tyres. It was found the best way to inspect the fence was using buckboard buggies, pulled by two camels. The camels were also used as pack animals, especially in the north. In the east, camels were used to pull drays with supplies for the riders. Camels were ideal for this as they could go for a long time without water. They were considered critical to the building and maintenance of the fence. Crawford supervised four sub-inspectors, each responsible for about 500 miles (800 km) of fence, and 25 boundary riders, who regularly patrolled 100-mile (160 km) sections of fence. Due to frontier violence in the north of the state, a 300-mile (480 km) section of No. 1 Fence was patrolled by riders who traveled in pairs. Crawford also was responsible for eliminating rabbits that had breached the fence. In the first year following the fence's completion, rabbit colonies were found and all members killed at several locations inside the fence. These included sites near Coorow, Mullewa, and Northampton. Following the introduction of myxomatosis to control rabbits in the 1950s, the importance of the rabbit-proof fence diminished.

Effectiveness By 1902, rabbits had already been found west of the fence line that had been initially constructed. The Number 2 Rabbit Proof Fence was built in 1905 in order to stem their advance. It held back the rabbits for many years, to such an extent that the Government Scheme for supplying rabbit netting, by extending long-term loans to farmers, was never applied to farmers west of that fence. The farmers between the two fences suffered from the ravages of the rabbits for many years, before they bred into plague form to spread out over the agricultural districts to the west of the No. 2 fence. Overall, as a long-term barrier to rabbits, the fences were a failure; even while construction was underway, rabbits were hopping into regions that the fences were intended to protect. According to a web page published by the State Library of Western Australia, the fences represent "a unique, if inadequate, response to an overwhelming environmental problem".

Intersection with railway system No. 1 Fence intersected railway lines at:

Eastern Railway near Burracoppin Wyalkatchem: Southern Cross railway at Campion Sandstone branch railway: just west of Anketell Meekatharra–Wiluna railway: at Paroo No. 2 Fence intersected with most of the Wheatbelt railway lines of Western Australia.

Elsewhere in Australia

The Darling Downs–Moreton Rabbit Board fence is a rabbit fence that extends along part of the Queensland–New South Wales border.

… excerpt ends here. Continue reading the full article.

Illustrations

Rabbit-proof fence: The rabbit-proof fence in 2005
The rabbit-proof fence in 2005
Rabbit-proof fence: Map of the original rabbit-proof fences in Western Australia.
Map of the original rabbit-proof fences in Western Australia.
Rabbit-proof fence: Boundary rider's team at the 100-mile (160 km) No. 1 Fence in Western Australia in 1926
Boundary rider's team at the 100-mile (160 km) No. 1 Fence in Western Australia in 1926
Rabbit-proof fence: 1884 cartoon in response to a proposal to erect a rabbit-proof fence between New South Wales and Queensland. The caption reads: "Mr Stevenson, M.L.A., suggested that the Government should erect a wire fence along our New South Wales border in order to check the coming invasion of rabbits. The artist depicts the probable use the bunnies would make of the fence."
1884 cartoon in response to a proposal to erect a rabbit-proof fence between New South Wales and Queensland. The caption reads: "Mr Stevenson, M.L.A., suggested that the Government should erect a wire fence along our New South Wales border in order to check the coming invasion of rabbits. The artist depicts the probable use the bunnies would make of the fence."

Worked examples

Example 1 — a first encounter with Rabbit-proof fence

Start with the simplest possible case. Write down what Rabbit-proof fence claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Rabbit-proof fence before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Rabbit-proof fence ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Rabbit-proof fence

In research
Rabbit-proof fence appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Rabbit-proof fence in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Rabbit-proof fence is common in secondary-school and first-year university syllabi. It links to neighbouring topics 1907 establishments in Australia, Animal migration, Buildings and structures completed in 1907, so understanding it makes those chapters shorter.
In everyday life
Look for Rabbit-proof fence outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Rabbit-proof fence” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Rabbit-proof fence in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Rabbit-proof fence means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Rabbit-proof fence out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Rabbit-proof fence in simple terms?

The State Barrier Fence, formerly known as the Rabbit-Proof Fence, the State Vermin Barrier Fence, and the Emu Fence, is a series of pest-exclusion fences originally constructed between 1902 and 1907 to keep rabbits and other agricultural pests from entering Western Australia from the east. There a…

Why does Rabbit-proof fence matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Rabbit-proof fence?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Rabbit-proof fence.

Tags

  • 1907 establishments in Australia
  • Animal migration
  • Buildings and structures completed in 1907
  • Fences
  • Mid West (Western Australia)
  • Pilbara
  • Rabbits
  • Separation barriers
  • Wheatbelt (Western Australia)

Keep exploring