ArticleslgStudy

engineering

Reclamation of Wellington Harbour

Reclamation of Wellington Harbour is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Reclamation of Wellington Harbour rather than just read about it. In short: Reclamation of Wellington Harbour started in the 1850s, in order to increase the amount of usable land for the then new City of Wellington. Flat land plots in the early city were scarce, with little room for public buildings and parks, as well as inadequate dockside areas for shipping.

Reclamation of Wellington Harbour — main illustration
Reclamation of Wellington Harbour — illustration

Key takeaways

  • Reclamation of Wellington Harbour belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Reclamation of Wellington Harbour to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Reclamation of Wellington Harbour from memory before moving on to harder problems.

Reference excerpt

Reclamation of Wellington Harbour started in the 1850s, in order to increase the amount of usable land for the then new City of Wellington. Flat land plots in the early city were scarce, with little room for public buildings and parks, as well as inadequate dockside areas for shipping. Reclamation progressively advanced into the harbour throughout the 19th and 20th centuries, providing room for public, commercial and industrial areas for the city. Large reclamations were made in the 1960s and 1970s to meet the demands of container shipping and new cargo handling methods. For over 100 years, development was largely overseen by the Wellington Harbour Board, formed in 1880. As one of the outcomes of the 1989 local government reforms, an operating company called Port of Wellington (now CentrePort Wellington) was formed. At the time it commenced operation in 1989, it owned approximately 72 ha (180 acres) of Wellington waterfront property including wharves. The remainder of the Wellington waterfront area from Shed 21 to Clyde Quay Wharf, including all the buildings, was transferred to Wellington City Council. Since then, the formerly industrial waterfront has been converted into office space and public areas. Reclamation has added more than 155 hectares to Wellington.

Establishment of Wellington

A plan for the New Zealand Company's new settlement of Britannia at Pito-one (Petone) had been prepared in England by Samuel Cobham. The key elements of his city were a large amount of flat land on the shores of a harbour, traversable by a navigable river. When surveyors arrived in 1840 on the Cuba led by Captain William Mein Smith, it was determined that the Hutt River was not navigable and, due to its tendency to flood, was not appropriate to support a major city. For these reasons the new settlement was relocated to the southern shores of Port Nicholson and renamed Wellington. Edward Gibbon Wakefield of the New Zealand Company had devised a system of "packages" of land for colonists of one town acre each. Cobham's Britannia consisted of 1100 1-acre (4,000 m2) town sections, which William Mein Smith struggled to fit into the new location. These sections were squeezed into the available space by sacrificing many of the planned amenities such as parks, reserves, ports, libraries and many other public areas identified in the original plan. For this reason, from Wellington's outset, there was a need for extra land.

19th century reclamations

Early reclamations While large scale reclamation began in the 1850s, the earliest reclamations in Wellington were conducted by private citizens. A popular story of the first reclamation conducted in Wellington was that done by George Bennet. Bennet had arrived in 1848 on the Berenicia and purchased a hilly section at Windy, or Clay Point (what is now the corner of Lambton Quay and Willis Street). At that time, Windy Point was a precipice with a narrow and often impassible path connecting Willis Street to Beach Road (now Lambton Quay). Bennet commenced, to the amusement of neighbours, with pick-axe, shovel and barrow to move earth from the Point, tossing the spoil onto the path and into the harbour, thus widening the track and performing Wellington's first reclamation. A programme of systematic reclamation began in 1852, overseen by the provincial government. Charles Carter completed a 360' x 100' extension below Willis Street at a cost of £1,036. In 1855, the magnitude 8.2 Wairarapa earthquake uplifted the northwestern side of Wellington bay (in some places up to 1.5 metres). This created a tidal swamp, and rendered many of the existing jetties in the harbour unusable. Most of this land was subsequently reclaimed, providing an excellent new rail and road route to the north. Another result of the newly raised land in Wellington was that the shipping basin planned for the city was abandoned and the land then used for a cricket ground, the Basin Reserve.

Establishment of the Wellington Harbour Board The Wellington City Council was inaugurated in 1870, and by the end of the 1870s some 70 acres (280,000 m2) of land had been reclaimed using spoil from the hills behind Lambton Quay and from Wadestown Hill. In 1880, the Wellington Harbour Board was established to manage and develop the harbour and its facilities. From then on reclamation work was divided between the Harbour Board, the Government and the City Council. Among major developments from 1880 to the turn of the century was reclamation north of Pipitea Point for railways land and south of Queens Wharf to Te Aro by the City Council. This removed the last vestiges of private ownership of the foreshore, putting the waterfront under the control of the Harbour Board. By the end of the 19th century, the original 1840 shoreline was unrecognisable.

20th century reclamations

From 1900 to 1930 further reclamations were made for railways and Harbour Board purposes. Additional wharves and the seawall at Oriental Bay were built, and the boat harbour at Clyde Quay was constructed.

Thorndon reclamations An 1875-78 Thorndon Reclamation provided space for streets and government offices. Another started in January 1924, to provide space for a new railway goods yard, a wider railway approach to the new station, a new road, more shipping berths and a floating dock. A 3,879 ft (1,182 m) concrete sea-wall was built to enclose the area, 8 ft (2.4 m) above low water, and with foundations 27 ft (8.2 m) to 53 ft (16 m) below low water, with a base width of 18 ft 9 in (5.72 m) to 30 ft 6 in (9.30 m). The dredger Whakarire and drag-suction dredge Kaione filled the area with sand, shells and gravel, before a top layer of clay, broken bricks and concrete was added, starting from the north. The area for the floating dock was dredged to 46 ft (14 m) below low water, some of it blasted out. The last part of the reclamation was the Aotea Quay Breastwork, completed in February 1940.

1960s and container shipping

… excerpt ends here. Continue reading the full article.

Illustrations

Reclamation of Wellington Harbour: An animation showing the phases of reclamation by year in Wellington Harbour.
An animation showing the phases of reclamation by year in Wellington Harbour.
Reclamation of Wellington Harbour: The Cuba anchored in Wellington Harbour by Charles Heaphy.
The Cuba anchored in Wellington Harbour by Charles Heaphy.
Reclamation of Wellington Harbour: Map of proposed reclamation of the area on the harbour side of Lambton Quay from 1851
Map of proposed reclamation of the area on the harbour side of Lambton Quay from 1851
Reclamation of Wellington Harbour: Two men fishing off the reclamations at Te Aro, in the vicinity of Cable Street, Wellington. Photograph taken circa. 1910.
Two men fishing off the reclamations at Te Aro, in the vicinity of Cable Street, Wellington. Photograph taken circa. 1910.
Reclamation of Wellington Harbour: Reclamation in Thorndon circa 1925
Reclamation in Thorndon circa 1925

Worked examples

Example 1 — a first encounter with Reclamation of Wellington Harbour

Start with the simplest possible case. Write down what Reclamation of Wellington Harbour claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Reclamation of Wellington Harbour before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Reclamation of Wellington Harbour ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Reclamation of Wellington Harbour

In research
Reclamation of Wellington Harbour appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Reclamation of Wellington Harbour in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Reclamation of Wellington Harbour is common in secondary-school and first-year university syllabi. It links to neighbouring topics Coastal construction, Coastal engineering, Land reclamation in New Zealand, so understanding it makes those chapters shorter.
In everyday life
Look for Reclamation of Wellington Harbour outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Reclamation of Wellington Harbour” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Reclamation of Wellington Harbour in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Reclamation of Wellington Harbour means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Reclamation of Wellington Harbour out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Reclamation of Wellington Harbour in simple terms?

Reclamation of Wellington Harbour started in the 1850s, in order to increase the amount of usable land for the then new City of Wellington. Flat land plots in the early city were scarce, with little room for public buildings and parks, as well as inadequate dockside areas for shipping.

Why does Reclamation of Wellington Harbour matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Reclamation of Wellington Harbour?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Reclamation of Wellington Harbour.

Tags

  • Coastal construction
  • Coastal engineering
  • Land reclamation in New Zealand
  • Wellington Harbour
  • Wellington Waterfront

Keep exploring