ArticleslgStudy

science

Robinson projection

Robinson projection is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Robinson projection rather than just read about it. In short: The Robinson projection is a map projection of a world map that shows the entire world at once. It was created in an attempt to find a good compromise to the problem of readily showing the whole globe as a flat image.

Robinson projection — main illustration
Robinson projection — illustration

Key takeaways

  • Robinson projection belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Robinson projection to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Robinson projection from memory before moving on to harder problems.

Reference excerpt

The Robinson projection is a map projection of a world map that shows the entire world at once. It was created in an attempt to find a good compromise to the problem of readily showing the whole globe as a flat image. The Robinson projection was devised by Arthur H. Robinson in 1963 in response to an appeal from the Rand McNally company, which has used the projection in general-purpose world maps since that time. Robinson published details of the projection's construction in 1974. The National Geographic Society (NGS) began using the Robinson projection for general-purpose, full world maps in 1988, replacing the Van der Grinten projection. In 1998, the NGS abandoned the Robinson projection for that use in favor of the Winkel tripel projection, as the latter "reduces the distortion of land masses as they near the poles".

Strengths and weaknesses The Robinson projection is neither equal-area nor conformal, abandoning both for a compromise. The creator felt that this produced a better overall view than could be achieved by adhering to either. The meridians curve gently, avoiding extremes, but thereby stretch the poles into long lines instead of leaving them as points. Hence, distortion close to the poles is severe, but quickly declines to moderate levels moving away from them. The straight parallels imply severe angular distortion at the high latitudes toward the outer edges of the map – a fault inherent in any pseudocylindrical projection. However, at the time it was developed, the projection effectively met Rand McNally's goal to produce appealing depictions of the entire world.

I decided to go about it backwards. … I started with a kind of artistic approach. I visualized the best-looking shapes and sizes. I worked with the variables until it got to the point where, if I changed one of them, it didn't get any better. Then I figured out the mathematical formula to produce that effect. Most mapmakers start with the mathematics.

Formulation The projection is defined by the table:

The table is indexed by latitude at 5-degree intervals; intermediate values are calculated using interpolation. Robinson did not specify any particular interpolation method, but it is reported that others used either Aitken interpolation (with polynomials of unknown degrees) or cubic splines while analyzing area deformation on the Robinson projection. The X column is the ratio of the length of the parallel to the length of the equator; the Y column can be multiplied by 0.2536 to obtain the ratio of the distance of that parallel from the equator to the length of the equator. Coordinates of points on a map are computed as follows:

x = 0.8487 R X ( λ − λ 0 ) , y = 1.3523 R Y , {\displaystyle {\begin{aligned}x&=0.8487\,RX(\lambda -\lambda _{0}),\\y&=1.3523\,RY,\end{aligned}}}

where R is the radius of the globe at the scale of the map, λ is the longitude of the point to plot, and λ0 is the central meridian chosen for the map (both λ and λ0 are expressed in radians). Simple consequences of these formulas are:

With x computed as a constant multiplier to the meridian across the entire parallel, meridians of longitude are thus equally spaced along the parallel. With y having no dependency on longitude, parallels are straight horizontal lines.

Applications The Central Intelligence Agency World Factbook uses the Robinson projection in its political and physical world maps. The European Centre for Disease Prevention and Control recommends using the Robinson projection for mapping the whole world.

See also List of map projections Cartography Kavrayskiy VII

References

Further reading Arthur H. Robinson (1974). "A New Map Projection: Its Development and Characteristics". In: International Yearbook of Cartography. Vol 14, 1974, pp. 145–155. John B. Garver Jr. (1988). "New Perspective on the World". In: National Geographic, December 1988, pp. 911–913. John P. Snyder (1993). Flattening The Earth—2000 Years of Map Projections, The University of Chicago Press. pp. 214–216.

External links

Table of examples and properties of all common projections, from radicalcartography.net Numerical evaluation of the Robinson projection, from Cartography and Geographic Information Science, April, 2004 by Cengizhan Ipbuker

Illustrations

Robinson projection: Robinson projection of the world
Robinson projection of the world
Robinson projection: The Robinson projection with Tissot's indicatrix of deformation
The Robinson projection with Tissot's indicatrix of deformation
Robinson projection: Map of the world created by the Central Intelligence Agency, with standard parallels 38°N and 38°S
Map of the world created by the Central Intelligence Agency, with standard parallels 38°N and 38°S
Robinson projection: Map of the world with all recognized jurisdictions
Map of the world with all recognized jurisdictions

Worked examples

Example 1 — a first encounter with Robinson projection

Start with the simplest possible case. Write down what Robinson projection claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Robinson projection before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Robinson projection ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Robinson projection

In research
Robinson projection appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Robinson projection in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Robinson projection is common in secondary-school and first-year university syllabi. It links to neighbouring topics Map projections, so understanding it makes those chapters shorter.
In everyday life
Look for Robinson projection outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Robinson projection” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Robinson projection in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Robinson projection means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Robinson projection out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Robinson projection in simple terms?

The Robinson projection is a map projection of a world map that shows the entire world at once. It was created in an attempt to find a good compromise to the problem of readily showing the whole globe as a flat image.

Why does Robinson projection matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Robinson projection?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Robinson projection.

Tags

  • Map projections

Keep exploring