ArticleslgStudy

science

Roland GR-500

Roland GR-500 is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Roland GR-500 rather than just read about it. In short: The Roland GR-500 is a guitar synthesizer. Manufactured by the Roland Corporation and FujiGen in 1977, it was one of the first guitar synthesizers.

Roland GR-500 — main illustration
Roland GR-500 — illustration

Key takeaways

  • Roland GR-500 belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Roland GR-500 to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Roland GR-500 from memory before moving on to harder problems.

Reference excerpt

The Roland GR-500 is a guitar synthesizer. Manufactured by the Roland Corporation and FujiGen in 1977, it was one of the first guitar synthesizers.

Overview

The synthesizer module included Polyensemble, Bass, Solo Synth, and External synthesizer control. Much of the voltage-controller filter and voltage controlled amplifier sections were based on previous analog mono-synths from Roland. Sliders adjust the VCO, VCF, VCA, and LFO sections; there is no memory to store settings. The synth module is controlled by a highly modified guitar: the GS-500 guitar controller was built in a partnership between Roland and the large Japanese guitar builder FujiGen. The result was the Fuji Roland Corporation, established in 1977, through a joint capital investment. The GS-500 controller used a special pickup system that connected to the synth module via Roland's own 24-pin interface. Controls on the guitar were primarily for adjusting the relative volume of the different sections: guitar, polyensemble, bass, solo section, and external synth. The GS-500 guitar does not have a standard 1/4-inch guitar output and cannot be used without the GR-500 synthesizer module. It has a particular infinite sustain system: the frets in the GR-500 are connected to its electrical ground, and when a player frets a string, an electric current is passed through the string. The electric signal passing through the string is a greatly amplified version of the string signal detected by the divided hexaphonic pickup. Large magnets replaced the traditional "neck" pickup. As a result of Fleming's Law, the alternating electric current in the string passing through the strong magnetic field causes the string to vibrate and create a feedback loop and infinite sustain. The GS-500 used a bridge with plastic saddles to electrically isolate each string.

Sections Guitar: this is the output from a humbucking pickup. A three position EQ switch, plus tone control, provided variation to the guitar signal. There is also an optional mild peaking filter, somewhat similar to a wah-wah pedal, on the GR-500 module. Polyensemble: this is not a true synthesizer section, but rather a unique distortion circuit using custom Roland "trigger pulse generator" chips. These chips are covered in epoxy so the actual circuit is unknown. The output of the Polyensemble is sent to an Attack/Decay/Sustain (ADS) Envelope Generator, one of three identical ADS Envelope Generators in the GR-500. Bass: This is a true, pitch-to-voltage analog guitar synthesizer section. The pitch detection circuit makes use of another proprietary Roland part: the "fundamental generator" chip. Like the polyensemble, the bass output passes through an ADS Envelope Generator. Bass can be output on all six strings, just 4, 5 and 6, or only on 5 and 6. Solo Melody: this section is very close to a traditional analog monophonic synthesizer. Using the same proprietary Roland "fundamental generator" chip, the possible waveforms include 16' pulse, 8' pulse, and sawtooth waveform. The -24 dB per octave voltage-controlled filter is self-oscillating, with string-pitch tracking. In addition to the same ADS Envelope Generator found in the Polyensemble and Bass, there is a triangle wave LFO to modulate pulse width or the filter cutoff. The filter can also be used to process the output of the polyensemble section, and an external input. External Synth: This section was designed for control over external synthesizers. There are two versions of the GR-500. Later versions added an extra oscillator so that the Solo Melody section could be detuned from the rest of the synthesizer, resulting in a richer, "fatter" sound. The most effective use of the GR-500 may be found in the Polyensemble section, which, when combined with the infinite sustain system, made for a rich, symphonic sound. Also, the Polyensemble section, being basically a complex distortion circuit, did not require any pitch-to-voltage tracking, and so was not plagued by the pitch tracking errors common with early guitar synths. The Bass and Solo Melody sections work reasonably well. Roland also produced the very rare FC-50 Foot Controller for the GR500 which allowed three pre-sets to be saved and recalled by the user as well as a selector for manual control.

Notable users Chuck Hammer Tangerine Dream Steve Hillage Hisashi Imai (Buck-Tick) Genesis (Mike Rutherford within Genesis, and former Genesis guitarist Steve Hackett in his solo career) Ryo Kawasaki, who was hired by Roland to test drive the Roland GS-500. Alex Lifeson Jimmy Page Andy Summers Jeff "Skunk" Baxter

References

US patent 4137811, Ikutaro Kakehashi, "Electrical String-Instrument", issued February 6, 1979 US patent 4181058, Noboru Suenaga, "Electrical String-Instrument", issued January 1, 1980

Further reading Loney, Robert D. (July–August 1981). "More GR-500 comments and mods". Polyphony. Vol. 7, no. 1. p. 28. ISSN 0163-4534. OCLC 1090378445.

Illustrations

Roland GR-500: Roland GR-500 Guitar and Synth Module
Roland GR-500 Guitar and Synth Module
Roland GR-500: Roland GR-500 in its case
Roland GR-500 in its case
Roland GR-500: Roland GR 500 Guitar Synth Controller used by Chuck Hammer while recording with David Bowie and Lou Reed
Roland GR 500 Guitar Synth Controller used by Chuck Hammer while recording with David Bowie and Lou Reed

Worked examples

Example 1 — a first encounter with Roland GR-500

Start with the simplest possible case. Write down what Roland GR-500 claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Roland GR-500 before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Roland GR-500 ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Roland GR-500

In research
Roland GR-500 appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Roland GR-500 in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Roland GR-500 is common in secondary-school and first-year university syllabi. It links to neighbouring topics Effects units, Guitar synthesizers, Music hardware, so understanding it makes those chapters shorter.
In everyday life
Look for Roland GR-500 outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Roland GR-500” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Roland GR-500 in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Roland GR-500 means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Roland GR-500 out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Roland GR-500 in simple terms?

The Roland GR-500 is a guitar synthesizer. Manufactured by the Roland Corporation and FujiGen in 1977, it was one of the first guitar synthesizers.

Why does Roland GR-500 matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Roland GR-500?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Roland GR-500.

Tags

  • Effects units
  • Guitar synthesizers
  • Music hardware
  • Musical instruments invented in the 1970s
  • Roland electric guitars
  • Roland synthesizers

Keep exploring