ArticleslgStudy

computer science

SIGINT Activity Designator

SIGINT Activity Designator is a computer science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand SIGINT Activity Designator rather than just read about it. In short: A SIGINT Activity Designator (or SIGAD) identifies a signals intelligence (SIGINT) line of collection activity associated with a signals collection station, such as a base or a ship. For example, the SIGAD for Menwith Hill in the UK is USD1000.

SIGINT Activity Designator — main illustration
SIGINT Activity Designator — illustration

Key takeaways

  • SIGINT Activity Designator belongs to computer science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect SIGINT Activity Designator to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of SIGINT Activity Designator from memory before moving on to harder problems.

Reference excerpt

A SIGINT Activity Designator (or SIGAD) identifies a signals intelligence (SIGINT) line of collection activity associated with a signals collection station, such as a base or a ship. For example, the SIGAD for Menwith Hill in the UK is USD1000. SIGADs are used by the signals intelligence agencies of Australia, Canada, New Zealand, the United Kingdom, and the United States (the Five Eyes).

There are several thousand SIGADs including the substation SIGADs denoted with a trailing alpha character. Several dozen of these are significant. The leaked Boundless Informant reporting screenshot showed that it summarized 504 active SIGADs during a 30-day period in March 2013.

General format A SIGAD consists of five to eight case insensitive alphanumeric characters. It takes the general form of an alphanumeric designator normally composed of a two- or three-letter prefix followed by one to three numbers. Often a dash is used to separate the alphabetic and numeric characters in the primary part of the designator, but less frequently a space is used as a separator or the alphabetic and numeric characters are concatenated together. An additional alphabetic character can be added to denote a sub-designator for a subset of the primary unit, such as a detachment. Lastly, a numeric character can be added after the aforementioned alphabetic to provide for a sub-sub-designator. In the examples below an X represents an alphabetic character and an N represents a numeric character that are part of the primary designator. Likewise, an x represents an alphabetic character and an n represents a numeric character that are part of a sub-designator. Here are valid generalized examples of SIGADs:

The first two characters show which country operates the particular SIGINT facility, which can be US for the United States, UK for the United Kingdom, CA for Canada, AU for Australia and NZ for New Zealand. A third letter shows what sort of staff runs the station. SIGADs beginning with US without a third letter are used for intercept facilities run by the NSA.

PRISM SIGAD One prominent SIGAD as of April 2013 is US-984XN, with an unclassified codename of PRISM. It is "the number one source of raw intelligence used for NSA analytic reports" according to National Security Agency sources in a document leaked by Edward Snowden. The President's Daily Brief, an all-source intelligence product, cited SIGAD US-984XN as a source in 1,477 items in 2012. The U.S. government operates the PRISM electronic surveillance collection program through NSA's Special Source Operations, an alliance with trusted telecommunications providers.

SIGADs for spy ships The declassified SIGAD for the USS Liberty (AGTR-5) was USN-855. The USS Liberty incident occurred on 8 June 1967, during the Six-Day War, when Israeli Air Force jet fighter aircraft and Israeli Navy motor torpedo boats attacked the USS Liberty in international waters. The USS Pueblo (AGER-2) was a technical research ship, which was boarded and captured by North Korean forces on 23 January 1968, in what is known as the Pueblo incident. The declassified SIGAD for the NSA Direct Support Unit (DSU) from the Naval Security Group (NSG) on the USS Pueblo patrol involved in the incident was USN-467Y. The USS Pueblo, which officially remains a commissioned vessel of the United States Navy, is the only ship of the U.S. Navy currently being held captive.

Vietnam War SIGADs The following are the Vietnam War-era declassified SIGADs from inside South Vietnam during the period of 1969 to 1975:

Some locations have multiple SIGADs due to different types of collection activities and/or collection at different times during the period. The SIGADs beginning with USA were operated by the United States Air Force's United States Air Force Security Service (USAFSS). The SIGADs beginning with USM were operated by the United States Army's Army Security Agency (ASA). Lastly, the SIGADs beginning with USN were operated by the United States Navy's Naval Security Group (NAVSECGRU). All three of these units have been merged into other units or inactivated. The above list consists of the higher-echelon SIGADs. It does not include the numerous miscellaneous and temporary detachments, or direction finding stations belonging to major units or sites unless that detachment or site was the only one stationed in South Vietnam. Many of the "dets" were short-lived, often formed to support ongoing MACV operations or forward deployments of combat operational or maneuver units. These detachments usually were designated by a letter suffix attached to the higher-echelon SIGAD such as "USM-633J," which was a detachment of the 372d Radio Research Company, USM-633, supporting the United States Army's 25th Infantry Division.

Supporting Southeast Asia SIGADs The following declassified SIGADs were highly relevant to the Vietnam Campaign, but were located in areas outside of South Vietnam in Southeast Asia.

Again, detachments are not listed separately. In the case of the USS Maddox, naval Direct Support Units (DSUs) used the SIGAD USN-467 as a generic designator for their missions. Each specific patrol received a letter suffix for its duration. The subsequent mission would receive the next letter in an alphabetic sequence. Thus, SIGAD USN-467N specifically designates the USS Maddox patrol involved with the Gulf of Tonkin incident.

Joint Base SIGADs In November 2005, the US Congress performed a fifth round of Base Realignment and Closure. This 2005 law also created twelve joint bases by merging adjacent installations belonging to different services in an effort to reduce costs and improve efficiencies. Joint bases with a primarily SIGINT mission have SIGADs that begin with USJ. A joint base would have a primary SIGAD in the general form of USJ-NNN, where NNN are numeric characters. An actual example is not given, since these units are currently active.

See also Boundless Informant National Security Agency United States Intelligence Community

References

External links List of SIGINT Activity Designators 10 Things You Didn't Know About The National Security Agency Surveillance Program (28 February 2013)

Illustrations

SIGINT Activity Designator: Snapshot of Boundless Informant global heat map of data collection
Snapshot of Boundless Informant global heat map of data collection

Worked examples

Example 1 — a first encounter with SIGINT Activity Designator

Start with the simplest possible case. Write down what SIGINT Activity Designator claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In computer science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to SIGINT Activity Designator before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about SIGINT Activity Designator ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of SIGINT Activity Designator

In research
SIGINT Activity Designator appears in computer science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses SIGINT Activity Designator in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
SIGINT Activity Designator is common in secondary-school and first-year university syllabi. It links to neighbouring topics Cryptography, Cyberwarfare, Intelligence gathering disciplines, so understanding it makes those chapters shorter.
In everyday life
Look for SIGINT Activity Designator outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “SIGINT Activity Designator” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study SIGINT Activity Designator in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what SIGINT Activity Designator means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain SIGINT Activity Designator out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is SIGINT Activity Designator in simple terms?

A SIGINT Activity Designator (or SIGAD) identifies a signals intelligence (SIGINT) line of collection activity associated with a signals collection station, such as a base or a ship. For example, the SIGAD for Menwith Hill in the UK is USD1000.

Why does SIGINT Activity Designator matter?

Because it connects several computer science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study SIGINT Activity Designator?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on SIGINT Activity Designator.

Tags

  • Cryptography
  • Cyberwarfare
  • Intelligence gathering disciplines
  • Military intelligence
  • National Security Agency
  • Signals intelligence

Keep exploring