ArticleslgStudy

biology

S phase

S phase is a biology topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand S phase rather than just read about it. In short: S phase (Synthesis phase) is the phase of the cell cycle in which DNA is replicated, occurring between G1 phase and G2 phase. Since accurate duplication of the genome is critical to successful cell division, the processes that occur during S-phase are tightly regulated and widely conserved.

S phase — main illustration
S phase — illustration

Key takeaways

  • S phase belongs to biology; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect S phase to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of S phase from memory before moving on to harder problems.

Reference excerpt

S phase (Synthesis phase) is the phase of the cell cycle in which DNA is replicated, occurring between G1 phase and G2 phase. Since accurate duplication of the genome is critical to successful cell division, the processes that occur during S-phase are tightly regulated and widely conserved.

Regulation

Entry into S-phase is controlled by the G1 restriction point (R), which commits cells to the remainder of the cell-cycle if there is adequate nutrients and growth signaling. This transition is essentially irreversible; after passing the restriction point, the cell will progress through S-phase even if environmental conditions become unfavorable. Accordingly, entry into S-phase is controlled by molecular pathways that facilitate a rapid, unidirectional shift in cell state. In yeast, for instance, cell growth induces accumulation of Cln3 cyclin, which complexes with the cyclin dependent kinase CDK2. The Cln3-CDK2 complex promotes transcription of S-phase genes by inactivating the transcriptional repressor Whi5. Since upregulation of S-phase genes drive further suppression of Whi5, this pathway creates a positive feedback loop that fully commits cells to S-phase gene expression. A remarkably similar regulatory scheme exists in mammalian cells. Mitogenic signals received throughout G1-phase cause gradual accumulation of cyclin D, which complexes with CDK4/6. Active cyclin D-CDK4/6 complex induces release of E2F transcription factor, which in turn initiates expression of S-phase genes. Several E2F target genes promote further release of E2F, creating a positive feedback loop similar to the one found in yeast.

DNA replication

Throughout M phase and G1 phase, cells assemble inactive pre-replication complexes (pre-RC) on replication origins distributed throughout the genome. During S-phase, the cell converts pre-RCs into active replication forks to initiate DNA replication. This process depends on the kinase activity of Cdc7 and various S-phase CDKs, both of which are upregulated upon S-phase entry. Activation of the pre-RC is a closely regulated and highly sequential process. After Cdc7 and S-phase CDKs phosphorylate their respective substrates, a second set of replicative factors associate with the pre-RC. Stable association encourages MCM helicase to unwind a small stretch of parental DNA into two strands of ssDNA, which in turn recruits replication protein A (RPA), an ssDNA binding protein. RPA recruitment primes the replication fork for loading of replicative DNA polymerases and PCNA sliding clamps. Loading of these factors completes the active replication fork and initiates synthesis of new DNA. Complete replication fork assembly and activation only occurs on a small subset of replication origins. All eukaryotes possess many more replication origins than strictly needed during one cycle of DNA replication. Redundant origins may increase the flexibility of DNA replication, allowing cells to control the rate of DNA synthesis and respond to replication stress.

Histone synthesis Since new DNA must be packaged into nucleosomes to function properly, synthesis of canonical (non-variant) histone proteins occurs alongside DNA replication. During early S-phase, the cyclin E-Cdk2 complex phosphorylates NPAT, a nuclear coactivator of histone transcription. NPAT is activated by phosphorylation and recruits the Tip60 chromatin remodeling complex to the promoters of histone genes. Tip60 activity removes inhibitory chromatin structures and drives a three to ten-fold increase in transcription rate. In addition to increasing transcription of histone genes, S-phase entry also regulates histone production at the RNA level. Instead of polyadenylated tails, canonical histone transcripts possess a conserved 3` stem loop motif that selective binds to Stem Loop Binding Protein (SLBP). SLBP binding is required for efficient processing, export, and translation of histone mRNAs, allowing it to function as a highly sensitive biochemical "switch". During S-phase, accumulation of SLBP acts together with NPAT to drastically increase the efficiency of histone production. However, once S-phase ends, both SLBP and bound RNA are rapidly degraded. This immediately halts histone production and prevents a toxic buildup of free histones.

Nucleosome replication

Free histones produced by the cell during S-phase are rapidly incorporated into new nucleosomes. This process is closely tied to the replication fork, occurring immediately in "front" and "behind" the replication complex. Translocation of MCM helicase along the leading strand disrupts parental nucleosome octamers, resulting in the release of H3-H4 and H2A-H2B subunits. Reassembly of nucleosomes behind the replication fork is mediated by chromatin assembly factors (CAFs) that are loosely associated with replication proteins. Though not fully understood, the reassembly does not appear to utilize the semi-conservative scheme seen in DNA replication. Labeling experiments indicate that nucleosome duplication is predominantly conservative. The paternal H3-H4 core nucleosome remains completely segregated from newly synthesized H3-H4, resulting in the formation of nucleosomes that either contain exclusively old H3-H4 or exclusively new H3-H4. "Old" and "new" histones are assigned to each daughter strand semi-randomly, resulting in equal division of regulatory modifications.

… excerpt ends here. Continue reading the full article.

Illustrations

S phase: Asymmetry in the synthesis of leading and lagging strands
Asymmetry in the synthesis of leading and lagging strands
S phase: Steps in DNA synthesis
Steps in DNA synthesis
S phase: Conservative reassembly of core H3/H4 nucleosome behind the replication fork.
Conservative reassembly of core H3/H4 nucleosome behind the replication fork.

Worked examples

Example 1 — a first encounter with S phase

Start with the simplest possible case. Write down what S phase claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In biology, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to S phase before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about S phase ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of S phase

In research
S phase appears in biology research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses S phase in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
S phase is common in secondary-school and first-year university syllabi. It links to neighbouring topics Cell cycle, so understanding it makes those chapters shorter.
In everyday life
Look for S phase outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study S phase in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what S phase means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain S phase out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is S phase in simple terms?

S phase (Synthesis phase) is the phase of the cell cycle in which DNA is replicated, occurring between G1 phase and G2 phase. Since accurate duplication of the genome is critical to successful cell division, the processes that occur during S-phase are tightly regulated and widely conserved.

Why does S phase matter?

Because it connects several biology ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study S phase?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on S phase.

Tags

  • Cell cycle

Keep exploring