ArticleslgStudy

earth science

Saddle (landform)

Saddle (landform) is a earth science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Saddle (landform) rather than just read about it. In short: The saddle between two hills or mountains is the region surrounding the saddle point, the lowest point on the line tracing the drainage divide connecting the peaks. When, and if, the saddle is navigable, even if only on foot, the saddle of a (optimal) pass between the two massifs, is the area generally found around the lowest route on which one could pass between the two summits, which includes that point which is a…

Saddle (landform) — main illustration
Saddle (landform) — illustration

Key takeaways

  • Saddle (landform) belongs to earth science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Saddle (landform) to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Saddle (landform) from memory before moving on to harder problems.

Reference excerpt

The saddle between two hills or mountains is the region surrounding the saddle point, the lowest point on the line tracing the drainage divide connecting the peaks. When, and if, the saddle is navigable, even if only on foot, the saddle of a (optimal) pass between the two massifs, is the area generally found around the lowest route on which one could pass between the two summits, which includes that point which is a mathematically when graphed a relative high along one axis, and a relative low in the perpendicular axis, simultaneously; that point being by definition the col of the saddle.

Topography

A saddle is the lowest area between two highlands (prominences or peaks) which has two wings which span the divide (the line between the two prominences) by crossing the divide at an angle, and, so is concurrently the local highpoint of the land surface which falls off in the lower direction. That is, the drainage divide is a ridge along the high point of the saddle, as well as between the two peaks and so defines the major reference axis. A saddle can vary from a sharp, narrow gap to a broad, comfortable, sway-backed, shallow valley so long as it is both the high point in the sloping faces which descends to lower elevations and the low area between the two (or three or four.) flanking summits. Concurrently, along a different axis, it is the low point between two peaks, so as such, is the likely 'optimal' high point in a pass if the saddle is traversed by a track, road or railway.

Saddles and cols The relationship between saddles and cols is not universally agreed upon. A col is sometimes defined as the lowest point on a saddle co-linear with the drainage divide that connects the peaks. Whittow describes a saddle as "low point or col on a ridge between two summits", whilst the Oxford Dictionary of English implies that a col is the lowest point on the saddle. Monkhouse describes a saddle as a "broad, flat col in a ridge between two mountain summits." The term col tends to be associated more with mountain, rather than hill, ranges. The height of a summit above its highest saddle (called the key saddle) is effectively a measure of a hill's prominence, an important measure of the independence of its summit. Saddles lie on the line of the watershed between two hills.

Structural geology In structural geology, a saddle is a depression located along the axial trend of an anticline.

Mathematical saddles

A 'saddle point' in mathematics derives its name from the fact that the prototypical example in two dimensions is a surface that curves up in one direction, and curves down in a different direction, resembling a riding saddle or a mountain pass between two peaks forming a landform saddle.

Notes

References

Illustrations

Saddle (landform): Cross-section diagram of three hills, with two saddles marked by X. • There are three peaks (Schartenhöhe) or prominences shown labeled 'A', 'B', & 'C'. •  The diagram illustrates the topographic isolation (German: Dominanz)-the distance from a prominence which is also a minimum to the point of the same height. •  The 'isolation' (German: Dominanz) of the right two peaks is not labeled, but is represented by the dashed line. •  "sattel zwischen" means saddle between, so the labeling is saying the saddle between A and C is the same saddle as between A and B
Cross-section diagram of three hills, with two saddles marked by X. • There are three peaks (Schartenhöhe) or prominences shown labeled 'A', 'B', & 'C'. • The diagram illustrates the topographic isolation (German: Dominanz)-the distance from a prominence which is also a minimum to the point of the same height. • The 'isolation' (German: Dominanz) of the right two peaks is not labeled, but is represented by the dashed line. • "sattel zwischen" means saddle between, so the labeling is saying the saddle between A and C is the same saddle as between A and B
Saddle (landform): Route along a saddle
Route along a saddle
Saddle (landform): The saddle Mittelbergjoch (lower edge, left from middle) in Tyrolia in Austria. It is frequently crossed by mountaineers on the way up to the Wildspitze (3.768 m, right upper corner). In the diagram top right, the saddle is comparable to the leftmost drawn type.
The saddle Mittelbergjoch (lower edge, left from middle) in Tyrolia in Austria. It is frequently crossed by mountaineers on the way up to the Wildspitze (3.768 m, right upper corner). In the diagram top right, the saddle is comparable to the leftmost drawn type.
Saddle (landform): USGS topographic map of ridges and saddles near Hazelton, Pennsylvania (closer view). The points -A-, -B-, -C-, -D- and, -E- all represent saddles — relative minimums oriented to two or more nearby peaks, but a local maxima relative to lower land.
USGS topographic map of ridges and saddles near Hazelton, Pennsylvania (closer view). The points -A-, -B-, -C-, -D- and, -E- all represent saddles — relative minimums oriented to two or more nearby peaks, but a local maxima relative to lower land.

Worked examples

Example 1 — a first encounter with Saddle (landform)

Start with the simplest possible case. Write down what Saddle (landform) claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In earth science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Saddle (landform) before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Saddle (landform) ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Saddle (landform)

In research
Saddle (landform) appears in earth science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Saddle (landform) in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Saddle (landform) is common in secondary-school and first-year university syllabi. It links to neighbouring topics Landforms, Oronyms, Structural geology, so understanding it makes those chapters shorter.
In everyday life
Look for Saddle (landform) outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Saddle (landform)” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Saddle (landform) in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Saddle (landform) means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Saddle (landform) out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Saddle (landform) in simple terms?

The saddle between two hills or mountains is the region surrounding the saddle point, the lowest point on the line tracing the drainage divide connecting the peaks. When, and if, the saddle is navigable, even if only on foot, the saddle of a (optimal) pass between the two massifs, is the area gener…

Why does Saddle (landform) matter?

Because it connects several earth science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Saddle (landform)?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Saddle (landform).

Tags

  • Landforms
  • Oronyms
  • Structural geology

Keep exploring