ArticleslgStudy

science

Scottish units of measurement

Scottish units of measurement is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Scottish units of measurement rather than just read about it. In short: Scottish or Scots units of measurement are the weights and measures peculiar to Scotland which were nominally replaced by English units in 1685 but continued to be used in unofficial contexts until at least the late 18th century. The system was based on the ell (length), stone (mass), and boll and firlot (volume).

Scottish units of measurement — main illustration
Scottish units of measurement — illustration

Key takeaways

  • Scottish units of measurement belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Scottish units of measurement to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Scottish units of measurement from memory before moving on to harder problems.

Reference excerpt

Scottish or Scots units of measurement are the weights and measures peculiar to Scotland which were nominally replaced by English units in 1685 but continued to be used in unofficial contexts until at least the late 18th century. The system was based on the ell (length), stone (mass), and boll and firlot (volume). This official system coexisted with local variants, especially for the measurement of land area. The system is said to have been introduced by David I of Scotland (1124–53), although there are no surviving records until the 15th century when the system was already in normal use. Standard measures and weights were kept in each burgh, and these were periodically compared against one another at "assizes of measures", often during the early years of the reign of a new monarch. Nevertheless, there was considerable local variation in many of the units, and the units of dry measure steadily increased in size from 1400 to 1700. The Scots units of length were technically replaced by the English system by an Act of the Parliament of Scotland in 1685, and the other units by the Treaty of Union with England in 1706. However, many continued to be used locally during the 18th and 19th centuries. The introduction of the Imperial system by the Weights and Measures Act 1824 (5 Geo. 4. c. 74) saw the end of any formal use in trade and commerce, although some informal use as customary units continued into the 20th century. "Scotch measure" or "Cunningham measure" was brought to parts of Ulster in Ireland by Ulster Scots settlers, and used into the mid-19th century.

Length

Scottish inch The Scottish inch was 25.44 mm, almost the same as the English (and modern international) inch (25.40 mm). A fraudulent smaller inch of 1⁄42 ell (22.4 mm) is also recorded. foot (Scots: fit) 12 inches (305.3 mm; compare with the English foot of 304.8 mm). yard (yaird) 36 inches (915.9 mm; compare with the English yard of 914.4 mm). Rarely used except with English units, although it appears in an Act of Parliament from 1432: "The king's officer, as is foresaid, shall have a horn, and each one a red wand of three-quarters of a yard at least." Scots ell The ell (Latin: ulna) was the basic unit of length, equal to 37 inches (941.3 mm). The "Barony ell" of 42 inches (1069 mm) was used as the basis for land measurement in the Four Towns area near Lochmaben, Dumfriesshire. fall (faw) 6 ells, or 222 inches (5.648 m). Identical to the Scots rod and raip ("rope"). Scots mile 320 falls or 5920 feet or 1973.33 yards (1807 metres), compare with the English mile of 5280 English feet or 1760 yards (approximately 1609 metres), but varied from place to place. Obsolete by the 19th century.

Area A number of conflicting systems were used for area, sometimes bearing the same names in different regions, but working on different conversion rates. Because some of the systems were based on what land would produce, rather than the physical area, they are listed in their own section. Please see individual articles for more specific information. Because fertility varied widely, in many areas, production was considered a more practical measure.

Area by size For information on the squared units, please see the appropriate articles in the length section

square inch square ell square fall (faw) Scots rood (ruid) Scots acre

Area by production

Eastern Scotland:

oxgang (damh-imir) The area an ox could plough in a year (around 20 acres). ploughgate (plougate) 8 oxgangs davoch (dabhach, or dauch) 4 ploughgates

Area by taxation/rent In western Scotland, including Galloway:

markland (merkland, marg-fhearann) 8 ouncelands (varied) ounceland (unceland, tir-unga) 20 pennylands pennyland (peighinn) basic unit; sub-divided into halfpenny-land and farthing-land. Also:

quarterland (ceathramh Of variable value: one-quarter of a Markland. groatland (Scottish Gaelic, còta bàn) Land valued at a groat i.e. four pence

Volume

Dry volume Dry volume measures were slightly different for various types of grain, but often bore the same name.

chalder (chauder) Normally understood as 16 bolls (being just under 12 Winchester quarters) boll (bowe, or bole) Equal to 4 firlots. firlot peck lippie, or forpet These volume measurements were fixed at slightly different sizes at different times. A unified weights and measures system is attributed to David I – though the first written records of this are from the 14th century. The Assize of 1426 made changes to these measures. Then the Assize of 1457 was followed by four major revisions. These involved increases in the size of the firlot, the basic unit of grain measure, and occurred in: c.1500, 1555 (modified in 1563), 1587 and 1618. This last date gave a fixed Scottish system which only changed with the introduction of English measures. An increase in the size of the firlot allowed greater taxation to be raised (as each unit collected was bigger). Superimposed on this chronological complexity was the difference between the "legal" measures established by the assizes, and the actual measures used in the markets and everyday trade. The "trading" measure could be one sixteenth larger than the "legal" boll, and the "customary" boll a further one sixteenth larger. Weight equivalents of one boll are given in a trade dictionary of 1863 as follows: Flour 140 pounds; Peas or beans 280 pounds; Oats 264 pounds; Barley 320 pounds; Oatmeal 140 pounds.

Fluid volume

Nipperkin was also used, but perhaps not part of this more formal set.

Weight Weight was measured according to "troy measure" (Lanark) and "tron measure" (Edinburgh), which were standardised in 1661. In the Troy system these often bore the same name as imperial measures.

drop (drap) ounce (unce) pound (pund) stone (stane) Various local measures all existed, often using local weighing stones. See also the weight meanings of the boll under the dry volume section, above.

See also Units of measurement Systems of measurement History of measurement Scottish coinage Scottish pronunciation Tron

… excerpt ends here. Continue reading the full article.

Worked examples

Example 1 — a first encounter with Scottish units of measurement

Start with the simplest possible case. Write down what Scottish units of measurement claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Scottish units of measurement before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Scottish units of measurement ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Scottish units of measurement

In research
Scottish units of measurement appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Scottish units of measurement in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Scottish units of measurement is common in secondary-school and first-year university syllabi. It links to neighbouring topics British units of measurement, Early modern history of Scotland, Medieval history of Scotland, so understanding it makes those chapters shorter.
In everyday life
Look for Scottish units of measurement outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Scottish units of measurement” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Scottish units of measurement in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Scottish units of measurement means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Scottish units of measurement out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Scottish units of measurement in simple terms?

Scottish or Scots units of measurement are the weights and measures peculiar to Scotland which were nominally replaced by English units in 1685 but continued to be used in unofficial contexts until at least the late 18th century. The system was based on the ell (length), stone (mass), and boll and…

Why does Scottish units of measurement matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Scottish units of measurement?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Scottish units of measurement.

Tags

  • British units of measurement
  • Early modern history of Scotland
  • Medieval history of Scotland
  • Obsolete Scottish units of measurement
  • Obsolete units of measurement
  • Systems of units
  • Units of measurement by country

Keep exploring