Seismic tomography

Seismic tomography or seismotomography is a technique for imaging the subsurface of the Earth using seismic waves. The properties of seismic waves are modified by the material through which they travel. By comparing the differences in seismic waves recorded at different locations, it is possible to create a model of the subsurface structure. Most commonly, these seismic waves are generated by earthquakes or man-made sources such as explosions. Different types of waves, including P, S, Rayleigh, and Love waves can be used for tomographic images, though each comes with their own benefits and downsides and are used depending on the geologic setting, seismometer coverage, distance from nearby earthquakes, and required resolution. The model created by tomographic imaging is almost always a seismic velocity model, and features within this model may be interpreted as structural, thermal, or compositional variations. Geoscientists apply seismic tomography to a wide variety of settings in which the subsurface structure is of interest, ranging in scale from whole-Earth structure to the upper few meters below the surface.

Theory Tomography is solved as an inverse problem. Seismic data are compared to an initial Earth model and the model is modified until the best possible fit between the model predictions and observed data is found. Seismic waves would travel in straight lines if Earth was of uniform composition, but structural, chemical, and thermal variations affect the properties of seismic waves, most importantly their velocity, leading to the reflection and refraction of these waves. The location and magnitude of variations in the subsurface can be calculated by the inversion process, although solutions to tomographic inversions are non-unique. Most commonly, only the travel time of the seismic waves is considered in the inversion. However, advances in modeling techniques and computing power have allowed different parts, or the entirety, of the measured seismic waveform to be fit during the inversion. Seismic tomography is similar to medical x-ray computed tomography (CT scan) in that a computer processes receiver data to produce a 3D image, although CT scans use attenuation instead of travel-time difference. Seismic tomography has to deal with the analysis of curved ray paths which are reflected and refracted within the Earth, and potential uncertainty in the location of the earthquake hypocenter. CT scans use linear x-rays and a known source.

History In the early 20th century, seismologists first used travel time variations in seismic waves from earthquakes to make discoveries such as the existence of the Moho and the depth to the outer core. While these findings shared some underlying principles with seismic tomography, modern tomography itself was not developed until the 1970s with the expansion of global seismic networks. Networks like the World-Wide Standardized Seismograph Network were initially motivated by underground nuclear tests, but quickly showed the benefits of their accessible, standardized datasets for geoscience. These developments occurred concurrently with advancements in modeling techniques and computing power that were required to solve large inverse problems and generate theoretical seismograms, which are required to test the accuracy of a model. As early as 1972, researchers successfully used some of the underlying principles of modern seismic tomography to search for fast and slow areas in the subsurface. The first widely cited publication that largely resembles modern seismic tomography was published in 1976 and used local earthquakes to determine the 3D velocity structure beneath Southern California. The following year, P wave delay times were used to create 2D velocity maps of the whole Earth at several depth ranges, representing an early 3D model. The first model using iterative techniques, which improve upon an initial model in small steps and are required when there are a large number of unknowns, was done in 1984. The model was made possible by iterating upon the first radially anisotropic Earth model, created in 1981. A radially anisotropic Earth model describes changes in material properties, specifically seismic velocity, along a radial path through the Earth, and assumes this profile is valid for every path from the core to the surface. This 1984 study was also the first to apply the term "tomography" to seismology, as the term had originated in the medical field with X-ray tomography. Seismic tomography has continued to improve in the past several decades since its initial conception. The development of adjoint inversions, which are able to combine several different types of seismic data into a single inversion, help negate some of the trade-offs associated with any individual data type. Historically, seismic waves have been modeled as 1D rays, a method referred to as "ray theory" that is relatively simple to model and can usually fit travel-time data well. However, recorded seismic waveforms contain much more information than just travel-time and are affected by a much wider path than is assumed by ray theory. Methods like the finite-frequency method attempt to account for this within the framework of ray theory. More recently, the development of "full waveform" or "waveform" tomography has abandoned ray theory entirely. This method models seismic wave propagation in its full complexity and can yield more accurate images of the subsurface. Originally these inversions were developed in exploration seismology in the 1980s and 1990s and were too computationally complex for global and regional scale studies, but development of numerical modeling methods to simulate seismic waves has allowed waveform tomography to become more common.

… excerpt ends here. Continue reading the full article.