Self-focusing is a non-linear optical process induced by the change in refractive index of materials exposed to intense electromagnetic radiation. A medium whose refractive index increases with the electric field intensity acts as a focusing lens for an electromagnetic wave characterized by an initial transverse intensity gradient, as in a laser beam. The peak intensity of the self-focused region keeps increasing as the wave travels through the medium, until defocusing effects or medium damage interrupt this process. Self-focusing of light was discovered by Gurgen Askaryan. Self-focusing is often observed when radiation generated by femtosecond lasers propagates through many solids, liquids and gases. Depending on the type of material and on the intensity of the radiation, several mechanisms produce variations in the refractive index which result in self-focusing: the main cases are Kerr-induced self-focusing and plasma self-focusing.
Kerr-induced self-focusing Kerr-induced self-focusing was first predicted in the 1960s and experimentally verified by studying the interaction of ruby lasers with glasses and liquids. Its origin lies in the optical Kerr effect, a non-linear process which arises in media exposed to intense electromagnetic radiation, and which produces a variation of the refractive index n {\displaystyle n} as described by the formula n = n 0 + n 2 I {\displaystyle n=n_{0}+n_{2}I} , where n0 and n2 are the linear and non-linear components of the refractive index, and I is the intensity of the radiation. Since n2 is positive in most materials, the refractive index becomes larger in the areas where the intensity is higher, usually at the centre of a beam, creating a focusing density profile which potentially leads to the collapse of a beam on itself. Self-focusing beams have been found to naturally evolve into a Townes profile regardless of their initial shape. Self-focusing beyond a threshold of power can lead to laser collapse and damage to the medium, which occurs if the radiation power is greater than the critical power
P cr = α λ 2 4 π n 0 n 2 {\displaystyle P_{\text{cr}}=\alpha {\frac {\lambda ^{2}}{4\pi n_{0}n_{2}}}} , where λ is the radiation wavelength in vacuum and α is a constant which depends on the initial spatial distribution of the beam. Although there is no general analytical expression for α, its value has been derived numerically for many beam profiles. The lower limit is α ≈ 1.86225, which corresponds to Townes beams, whereas for a Gaussian beam α ≈ 1.8962. For air, n0 ≈ 1, n2 ≈ 4×10−23 m2/W for λ = 800 nm, and the critical power is Pcr ≈ 2.4 GW, corresponding to an energy of about 0.3 mJ for a pulse duration of 100 fs. For silica, n0 ≈ 1.453, n2 ≈ 2.4×10−20 m2/W, and the critical power is Pcr ≈ 2.8 MW. Kerr-induced self-focusing is crucial for many applications in laser physics, both as a key ingredient and as a limiting factor. For example, the technique of chirped pulse amplification was developed to overcome the nonlinearities and damage of optical components that self-focusing would produce in the amplification of femtosecond laser pulses. On the other hand, self-focusing is a major mechanism behind Kerr-lens modelocking, laser filamentation in transparent media, self-compression of ultrashort laser pulses, parametric generation, and many areas of laser-matter interaction in general.
Self-focusing and defocusing in gain medium Kelley predicted that homogeneously broadened two-level atoms may focus or defocus light when carrier frequency ω {\displaystyle \omega } is detuned downward or upward the center of gain line ω 0 {\displaystyle \omega _{0}} . Laser pulse propagation with slowly varying envelope E ( r → , t ) {\displaystyle E({\vec {\mathbf {r} }},t)} is governed in gain medium by the nonlinear Schrödinger-Frantz-Nodvik equation. When ω {\displaystyle \omega } is detuned downward or upward from ω 0 {\displaystyle \omega _{0}} the refractive index is changed. "Red" detuning leads to an increased index of refraction during saturation of the resonant transition, i.e. to self-focusing, while for "blue" detuning the radiation is defocused during saturation:
… excerpt ends here. Continue reading the full article.
