Shinbashira

Key takeaways

Shinbashira belongs to chemistry; place it in that map before memorising details.
Learn the definition first, then one example that makes the definition concrete.
Connect Shinbashira to a quantity you can measure, compute or draw — that is where exam questions come from.
Reproduce the core statement of Shinbashira from memory before moving on to harder problems.

Reference excerpt

The shinbashira (心柱, also 真柱 or 刹/擦 satsu) is a central pillar at the core of a pagoda or similar structure. The shinbashira has long been thought to be the key to the Japanese pagoda's notable earthquake resistance, when newer concrete buildings may collapse.

History Hōryū-ji, the world's oldest wooden structure, was found to have in 2001 a shinbashira from a tree felled in 594 CE. Their examples continue in impending centuries in other tō (塔, pagoda) like the Hokkiji in Nara in 8th century, and Kaijūsenji of Kyoto.

Architecture The pillar structure is made out of straight trunks of Japanese cypress (hinoki). The pillar runs the entire (but see below) height of the pagoda, and juts out of the top 'layer' of the pagoda, where it supports the finial of the pagoda. The shinbashira is a typical element of Japanese pagodas facing regular earthquakes, but cannot be found in China or Korea, which are not or at least not frequently hit by earthquakes and where other methods were developed instead. The initial architectural forms included the pillar ingrained deep within the foundation (Shinso ja: 心礎) Hōryūji Gojū-no-tou 法隆寺五重塔, (Gojū-no-tō: 5-layered-pagoda) was found to be 3m below ground level. At this time, pillars were tapered and became roughly circular from the point where they rose beyond the roof, starting as hexagonal from the base. This shaping was necessary as metal pieces were fit to the central pillar to support the spire. Later uses starting 12c involve them suspended just above the ground, thus making them suspensions like the Nikkō Tōshōgū Gojū-no-tū 日光東照宮五重塔 (1818) in Tochigi prefecture. Size had a bearing on the fragmentation of the pillars found in the 8th century. The central pillar of Gojuu-no-tou at Hōryūji has a height of 31.5 m with a diameter of 77.8 cm at base, 65.1 cm in the middle and approximately 24.1 cm at the midpoint on the spire. Such huge pillars had to be divided into three sections: from the base stone to the third floor; from the fourth story to the point where the spire begins, and the spire section. The shaft of a three-storied pagoda (三重塔, sanjū-no-tou) is divided between the second and third stories and again where the spire begins. During the 8c, shinbashira were erected on a base stone set at ground level. Example: Hokkiji Sanjuu-no-tou 法起寺三重塔 (742) in Nara. (see Earthquake Resistance below)

Earthquake resistance Japan is an earthquake-prone country, yet records show that only two of the pagodas have collapsed during the past 1,400 years owing to an earthquake. Hanshin earthquake in 1995 killed 6,400 people, toppled elevated highways, flattened office blocks and devastated the port area of Kobe. Yet it left the five-story pagoda at the Tō-ji Temple in nearby Kyoto unscathed, though it levelled a number of lower buildings in the neighbourhood. The reason traditionally attributed has been the shinbashira; newer research shows that the very wide eaves also contribute to the inertial stability of the pagoda. Overall deductions have not been very simplistic. Some of structural engineer Shuzo Ishida's model pagodas have a simulated shinbashira attached to the ground, as was common in pagodas built during the sixth to eighth centuries. Others simulate later designs with the shinbashira resting on a beam on the second floor or suspended from the fifth. Compared with a model with no shinbashira at all, Ishida finds that the one with a central column anchored to the ground survives longest, and is at least twice as strong as any other shinbashira arrangement. Studies about shinbashira and their quake resistant attributes have been many. These studies are now materializing even in brick-and-mortar buildings like the Tokyo Skytree. (see below)

Modern uses As a result of studies into the shinbashira structure and its utility in earthquake-resistance it has, once again, come into use in new buildings and structures, including the Tokyo Skytree. A central feature of the Tokyo Skytree tower is an innovative system to control swaying used here for the first time; it has been dubbed a "shinbashira" after the central pillar found in traditional five-story pagodas. The 375-meter-long, steel-reinforced concrete shinbashira is not directly connected to the tower itself and is designed to cancel out the swaying of the needle-like tower during an earthquake. According to an official with Nikken Sekkei, which designed the structure, the concept was developed on the basis that pagodas rarely topple during earthquakes. More recently in San Francisco the renovation of 680 Folsom Street, a fourteen-story 1960s steel building, inspired an ultra-modern iteration of the shinbashira: an 8-million-pound structural concrete core that can freely pivot atop a single sliding friction-pendulum bearing during a large earthquake. Tipping Mar, the engineering firm behind the design, used performance-based design and nonlinear time-history analysis to prove that the solution would meet the goals of the California Building Code.

See also Buddhist temples in Japan Hōryūji Japanese Buddhist architecture List of earthquakes in Japan Tō-ji The Japanese page on the architecture of the 5-tier pagoda of Japan contains sections about the debated reason behind pagodas' quake-resistance – one of the two theories is the Shinbashira, and also lists the types of styles in which the Shinbashira is employed in the building of the structure. Shinbashira (Tenrikyo)

References and further reading

Worked examples

Example 1 — a first encounter with Shinbashira

Start with the simplest possible case. Write down what Shinbashira claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In chemistry, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Shinbashira before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Shinbashira ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Shinbashira

In research: Shinbashira appears in chemistry research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry: Engineering practice reuses Shinbashira in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom: Shinbashira is common in secondary-school and first-year university syllabi. It links to neighbouring topics Architectural elements, Columns and entablature, Earthquake engineering, so understanding it makes those chapters shorter.
In everyday life: Look for Shinbashira outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

How to study Shinbashira in 20 minutes

Read the reference excerpt below once, without taking notes.
Close the page and write down what Shinbashira means in your own words.
Compare your version with the excerpt and mark what you missed.
Work through the three examples above with pen and paper.
Explain Shinbashira out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Shinbashira in simple terms?

The shinbashira (心柱, also 真柱 or 刹/擦 satsu) is a central pillar at the core of a pagoda or similar structure. The shinbashira has long been thought to be the key to the Japanese pagoda's notable earthquake resistance, when newer concrete buildings may collapse.

Why does Shinbashira matter?

Because it connects several chemistry ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Shinbashira?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Shinbashira.