Slate is a fine-grained, foliated, homogeneous, metamorphic rock derived from an original shale-type sedimentary rock composed of clay or volcanic ash through low-grade, regional metamorphism. It is the finest-grained foliated metamorphic rock. Foliation may not correspond to the original sedimentary layering, but instead is in planes perpendicular to the direction of metamorphic compression. The foliation in slate, called "slaty cleavage", is caused by strong compression in which fine-grained clay forms flakes to regrow in planes perpendicular to the compression. When expertly "cut" by striking parallel to the foliation with a specialized tool in the quarry, many slates display a property called fissility, forming smooth, flat sheets of stone which have long been used for roofing, floor tiles, and billiard tables. Slate is frequently grey in color, especially when seen en masse covering roofs. However, slate occurs in a variety of colors even from a single locality; for example, slate from North Wales can be found in many shades of grey, from pale to dark, and may also be purple, green, or cyan. Slate is not to be confused with shale, from which it may be formed, or schist. The word "slate" is also used for certain types of object made from slate rock. It may mean a single roofing tile made of slate, or a writing slate, which was traditionally a small, smooth piece of the rock, often framed in wood, used with chalk as a notepad or notice board, and especially for recording charges in pubs and inns. The phrases "clean slate" and "blank slate" come from this usage.
Description
Slate is a fine-grained, metamorphic rock that shows no obvious compositional layering but can easily be split into thin slabs and plates. It is usually formed by low-grade regional metamorphism of mudrock. This mild degree of metamorphism produces a rock in which the individual mineral crystals remain microscopic in size, producing a characteristic slaty cleavage in which fresh cleavage surfaces appear dull. This is in contrast to the silky cleaved surfaces of phyllite, which is the next-higher grade of metamorphic rock derived from mudstone. The direction of cleavage is independent of any sedimentary structures in the original mudrock, reflecting instead the direction of regional compression. Slaty cleavage is continuous, meaning that the individual cleavage planes are too closely spaced to be discernible in hand samples. The texture of the slate is totally dominated by these pervasive cleavage planes. Under a microscope, the slate is found to consist of very thin lenses of quartz and feldspar (QF-domains) separated by layers of mica (M-domains). These are typically less than 100 μm (micron) thick. Because slate was formed in low heat and pressure, compared to most other metamorphic rocks, some fossils can be found in slate; sometimes even microscopic remains of delicate organisms can be found in slate. The process of conversion of mudrock to slate involves a loss of up to 50% of the volume of the mudrock as it is compacted. Grains of platy minerals, such as clay minerals, are rotated to form parallel layers perpendicular to the direction of compaction, which begin to impart cleavage to the rock. Slaty cleavage is fully developed as the clay minerals begin to be converted to chlorite and mica. Organic carbon in the rock is converted to graphite. Slate is mainly composed of the minerals quartz, illite, and chlorite, which account for up to 95% of its composition. The most important accessory minerals are iron oxides (such as hematite and magnetite), iron sulfides (such as pyrite), and carbonate minerals. Feldspar may be present as albite or, less commonly, orthoclase. Occasionally, as in the purple slates of North Wales, ferrous (iron(II)) reduction spheres form around iron nuclei, leaving a light-green, spotted texture. These spheres are sometimes deformed by a subsequent applied stress field into ovoids, which appear as ellipses when viewed on a cleavage plane of the specimen. However, some evidence shows that reduced spots may also form after deformation and acquire an elliptical shape from preferential infiltration along the cleavage direction, so caution is required in using reduction ellipsoids to estimate deformation.
Terminology Before the mid-19th century, the terms "slate", "shale", and "schist" were not sharply distinguished. In the context of underground coal mining in the United States, the term slate was commonly used to refer to shale well into the 20th century. For example, roof slate referred to shale above a coal seam, and draw slate referred to shale that fell from the mine roof as the coal was removed. The British Geological Survey recommends that the term "slate" be used in scientific writings only when very little else is known about the rock that would allow a more definite classification. For example, if the characteristics of the rock show definitely that it was formed by metamorphosis of shale, it should be described in scientific writings as a metashale. If its origin is uncertain, but the rock is known to be rich in mica, it should be described as a pelite.
Uses
Construction
… excerpt ends here. Continue reading the full article.
