ArticleslgStudy

engineering

Southport Pier, Gold Coast

Southport Pier, Gold Coast is a engineering topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Southport Pier, Gold Coast rather than just read about it. In short: Southport Pier is a pier spanning the Gold Coast Broadwater in Southport, a suburb on the Gold Coast in South East Queensland, Australia. The current pier was constructed in 2009, replacing a previous structure demolished in 1969.

Southport Pier, Gold Coast — main illustration
Southport Pier, Gold Coast — illustration

Key takeaways

  • Southport Pier, Gold Coast belongs to engineering; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Southport Pier, Gold Coast to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Southport Pier, Gold Coast from memory before moving on to harder problems.

Reference excerpt

Southport Pier is a pier spanning the Gold Coast Broadwater in Southport, a suburb on the Gold Coast in South East Queensland, Australia. The current pier was constructed in 2009, replacing a previous structure demolished in 1969.

History

Located in the sheltered Broadwater, the pier and its surrounds was an attraction to visitors in the late 19th and the first half of the 20th century who sailed along the coast or, after the arrival of the railway, traveled down from Brisbane by steam train. Passengers were also transported to Brisbane via steamboats. Southport has had a number of jetties along the curve of beach between the mouth of the Nerang River and Deep Water Point in Labrador, some of them operating concurrently, since the 1870s. Without a wharf or similar structure it was not possible to land goods or passengers directly onto the shore without using a smaller boat. Differing opinions were held within the growing township as to the best position for a wharf or jetty. In February 1879 two delegations traveled to Brisbane to put forward their respective cases. One group was in favour of constructing the jetty in a position central to the township which they anticipated growing northwards. The other group preferred the jetty to be built to the south where the current owners were selling lots. The first permanent jetty in Southport was built to the south of the township near the mouth of the Nerang River opposite the Southport Hotel near the present day northern approach of the Gold Coast Bridge. Originally owned by Richard Gardiner, in early 1878 the Southport Hotel was sold to William Charles Maund who constructed a substantial jetty the following year. The jetty was designed by H. Barnes who was part of the first survey trip by the Harbours and Rivers Department mapping local waterways. The survey party were staying at the hotel which was, at the time, the only accommodation in the area. It was built by private subscription for £52 and was approximately 280 foot long and six foot wide. The jetty included a tram track along its length to aid in unloading and transferring luggage and other items from the steamers arriving at Southport It opened in late 1879 with additional work undertaken to create a channel between the new jetty and Deepwater Point at Labrador. By May 1880, it was reported that Maund, the hotelier, had substantially enlarged the existing jetty. In January 1880 a deputation of local residents visited the Acting Colonial Treasurer to request that the State Government construct a jetty able to meet their needs. The visit did not result in the Government committing funds, and it was suggested that the people of Southport or the local Divisional Board fund the endeavor. Upon the return of the deputation, a meeting of local residents was called in February at which the proposed jetty was discussed. In November the local residents met again to consider borrowing £600 to build the jetty. A second jetty was erected further north near the Pacific Hotel in the vicinity of the intersection of The Esplanade and Nerang Street which, by September 1881, was reported as being partially completed but in use. In October 1881 the growth of the township was being reported in local newspapers and the 'new jetty' is mentioned. Neither of the jetties were able to fully meet the needs of the local community. The jetty near the mouth of the river could not be used in low tide while the pier in front of the Pacific Hotel was not easily approached by steamers. The decision was made to build a third jetty incorporating the existing structure in front of the Pacific Hotel. After an unsuccessful attempt to raise the funds by public subscription, the money for the third jetty was provided by E. J. Stevens and John Cameron. The Queensland Government provided the lease for land on the water front and William David Nisbet, the engineer of the Harbours and Rivers Department, assisted with specifications and drew the plans. The owners leased the structure for three years to the Southport Divisional Board. On Wednesday 28 November 1883 the township's third jetty was opened with the 'whole of Southport' in attendance. To keep building costs low, the new jetty used reclaimed railway rails in its construction. This was reported as being one of the first times this method of construction was known to have been used. The new jetty was 800 foot long and had a goods shed and waiting room surrounded by a verandah on three sides. This extended structure was to become known as the Southport Pier. In 1886 the Southport Divisional Board announced that it intended to build a new pier and goods shed near the site of the 'old jetty near Balmer's hotel' at a cost of £600. In 1886 Balmer had taken over the Southport Hotel from Maund. In 1887 the Divisional Board were reporting that the existing jetty at the river mouth remained in private hands but the foreshore and surrounds, which were the responsibly of local government, were suffering from erosion. By 1888, the local community still did not have access to a free public jetty. Within a few years, the Southport Pier near the Pacific Hotel had been extended to 900 feet (270 m) and a bathing enclosure was built against the pier for locals and visitors to enjoy protected sea bathing. It was during this same period that construction of the Southport Sea Wall along the foreshore began. The Southport Pier and Baths Company leased—and ultimately sold—the pier to the Southport Divisional Board. In 1913, the timber structure was replaced with a concrete one. The very popular Pier Theatre opened in December 1926 and offered a venue for movies, dances and general entertainment. The first theatre was destroyed by fire in 1932 and rebuilt that same year. Both the pier and theatre were demolished in 1969.

Current structure

A new pier was constructed in 2009. Its length is 100 metres (330 ft).

See also

List of piers Southport Broadwater Parklands

References

Research notes provided by Gold Coast City Council Local Studies Library Gold Coast Bulletin, 18 May 1989 "SOUTHPORT". The Brisbane Courier. Vol. XXXIX, no. 8, 520. 1 May 1885. p. 3. Retrieved 7 May 2016 – via National Library of Australia.

External links Gold Coast Parks – Southport Pier

Illustrations

Southport Pier, Gold Coast illustration
Southport Pier, Gold Coast: Southport Pier, 1910
Southport Pier, 1910
Southport Pier, Gold Coast: Pier in 2015
Pier in 2015

Worked examples

Example 1 — a first encounter with Southport Pier, Gold Coast

Start with the simplest possible case. Write down what Southport Pier, Gold Coast claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In engineering, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Southport Pier, Gold Coast before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Southport Pier, Gold Coast ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Southport Pier, Gold Coast

In research
Southport Pier, Gold Coast appears in engineering research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Southport Pier, Gold Coast in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Southport Pier, Gold Coast is common in secondary-school and first-year university syllabi. It links to neighbouring topics Buildings and structures completed in 2009, Buildings and structures on the Gold Coast, Queensland, Piers in Australia, so understanding it makes those chapters shorter.
In everyday life
Look for Southport Pier, Gold Coast outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Southport Pier, Gold Coast” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Southport Pier, Gold Coast in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Southport Pier, Gold Coast means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Southport Pier, Gold Coast out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Southport Pier, Gold Coast in simple terms?

Southport Pier is a pier spanning the Gold Coast Broadwater in Southport, a suburb on the Gold Coast in South East Queensland, Australia. The current pier was constructed in 2009, replacing a previous structure demolished in 1969.

Why does Southport Pier, Gold Coast matter?

Because it connects several engineering ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Southport Pier, Gold Coast?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Southport Pier, Gold Coast.

Tags

  • Buildings and structures completed in 2009
  • Buildings and structures on the Gold Coast, Queensland
  • Piers in Australia
  • Southport, Queensland
  • Tourist attractions on the Gold Coast, Queensland
  • Transport buildings and structures in Queensland

Keep exploring