ArticleslgStudy

science

Spoon bending

Spoon bending is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Spoon bending rather than just read about it. In short: Spoon bending is the deformation of objects, especially metal cutlery, purportedly by paranormal means. It is a common theme for magic tricks, which use a variety of methods to produce the effect.

Spoon bending — main illustration
Spoon bending — illustration

Key takeaways

  • Spoon bending belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Spoon bending to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Spoon bending from memory before moving on to harder problems.

Reference excerpt

Spoon bending is the deformation of objects, especially metal cutlery, purportedly by paranormal means. It is a common theme for magic tricks, which use a variety of methods to produce the effect. Performers commonly use misdirection to draw their audience's attention away while the spoon is manually bent. Another method uses a metal spoon that has been prepared by repeatedly bending the spoon back and forth, weakening the material. Applying light pressure will then cause it to bend or break. Spoon bending attracted considerable media attention in the 1970s when a number of individuals claimed to have the ability to cause such effects by psychic means. The most famous was Uri Geller, who performed on television bending metal spoons, keys, and other objects. Geller's performances were revealed to be tricks due to the work of magician and investigator James Randi and others. Despite hundreds of experiments by parapsychologists to determine whether spoon bending is a genuine psychic phenomenon, spoon bending by psychic powers has not been demonstrated to the satisfaction of the scientific community.

History Spoon bending was popularized in the 1970s by magician and self-described psychic Uri Geller, who claimed to have paranormal powers and appeared on television performing purportedly psychokinetic feats such as causing spoons, nails, and keys to bend using the power of his mind. Geller's actual methods were revealed to be trickery largely due to the work of magician and investigator James Randi. (See § Methods, below.) While many individuals have claimed the paranormal or psychokinetic ability to bend spoons or manipulate other objects, spoon bending by psychic powers has not been demonstrated to the satisfaction of the scientific community. Randi offered a prize of one million dollars to any person who was able to demonstrate paranormal abilities, such as spoon bending.

Scientific testing Parapsychologists have conducted hundreds of experiments to determine whether spoon bending is a genuine psychic phenomenon. Physicist John Hasted believed that children could paranormally bend paper clips inside a glass sphere, provided the sphere had a hole in it and they were allowed to take the sphere into a room unobserved. Science writer and skeptic Martin Gardner wrote that Hasted was incapable of devising simple controls such as videotaping the children secretly. Stephen North, a British psychic, was tested by Hasted in the late 1970s. Hasted claimed North had the psychokinetic ability to bend spoons and teleport objects in and out of sealed containers. According to James Randi, during a test conducted by Hasted at Birkbeck College, North was observed to have bent a metal sample with his bare hands. North was tested in Grenoble on 19 December 1977 in scientific conditions and the results were negative. Jean-Pierre Girard, a French psychic, has claimed he can bend metal bars by psychokinesis. Girard was tested in the 1970s but failed to produce any paranormal effects in scientifically controlled conditions. He was tested on January 19, 1977 during a two-hour experiment in a Paris laboratory. The experiment was directed by physicist Yves Farge with a magician also present. All of the experiments were negative as Girard failed to make any of the objects move paranormally. He failed two tests in Grenoble in June 1977 with Randi. He was also tested on September 24, 1977 at a laboratory at the Nuclear Research Centre. Girard failed to bend any bars or change the structure of the metals. Other experiments into spoon bending were also negative and witnesses described his feats as fraudulent. Girard later admitted that he would sometimes cheat to avoid disappointing the public but insisted he still had genuine psychic power. Magicians and scientists have written that he produced all his alleged psychokinetic feats through fraudulent means. Between 1979 and 1981, the McDonnell Laboratory for Psychical Research at Washington University reported a series of experiments they named Project Alpha, in which two teenaged male subjects had demonstrated psychokinesis phenomena, including metal-bending and causing images to appear on film, under less than stringent laboratory conditions. Randi eventually revealed that the subjects were two of his associates, amateur conjurers Steve Shaw and Michael Edwards. The pair had created the effects by standard trickery, but the researchers, being unfamiliar with magic techniques, interpreted them as proof of psychokinesis. John Taylor had tested children in metal bending. According to Gardner, the controls were inadequate as the children would put paper clips in their pockets and later take one out twisted or be left with metal rods unobserved. Randi managed to bend an aluminum bar when Taylor was not looking and scratch on it "Bent by Randi". In other experiments, two scientists from the University of Bath examined metal bending with children in a room which was secretly being videotaped through a one-way mirror. The film revealed that the children bent the objects with their hands and feet. Due to the evidence of trickery, Taylor concluded metal bending had no paranormal basis. In an experimental study (Wiseman and Greening, 2005) two groups of participants were shown a videotape in which a fake psychic placed a bent key on a table. Participants in the first group heard the fake psychic suggest that the key was continuing to bend when it had remained stationary, while those in the second group did not. The results revealed that participants from the first group reported significantly more movement of the key than the second group. The findings were replicated in another study. The experiments had demonstrated that "testimony for PKMB [psychokinetic metal bending] after effects can be created by verbal suggestion, and therefore the testimony from individuals who have observed allegedly genuine demonstrations of such effects should not be seen as strong evidence in support of the paranormal".

Methods

… excerpt ends here. Continue reading the full article.

Illustrations

Spoon bending: Illusionist Guy Bavli demonstrates spoon bending
Illusionist Guy Bavli demonstrates spoon bending
Spoon bending: Psychologist Ray Hyman demonstrating Geller's spoon bending feats at a Center for Inquiry lecture in 2012
Psychologist Ray Hyman demonstrating Geller's spoon bending feats at a Center for Inquiry lecture in 2012

Worked examples

Example 1 — a first encounter with Spoon bending

Start with the simplest possible case. Write down what Spoon bending claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Spoon bending before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Spoon bending ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Spoon bending

In research
Spoon bending appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Spoon bending in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Spoon bending is common in secondary-school and first-year university syllabi. It links to neighbouring topics Magic tricks, Paranormal terminology, Parapsychology, so understanding it makes those chapters shorter.
In everyday life
Look for Spoon bending outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Spoon bending in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Spoon bending means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Spoon bending out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Spoon bending in simple terms?

Spoon bending is the deformation of objects, especially metal cutlery, purportedly by paranormal means. It is a common theme for magic tricks, which use a variety of methods to produce the effect.

Why does Spoon bending matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Spoon bending?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Spoon bending.

Tags

  • Magic tricks
  • Paranormal terminology
  • Parapsychology

Keep exploring