ArticleslgStudy

science

Stratigraphic cycles

Stratigraphic cycles is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Stratigraphic cycles rather than just read about it. In short: Stratigraphic cycles refer to the transgressive and regressive sequences bounded by unconformities in the stratigraphic record on the cratons. These cycles represent a large scale eustasy cycle since the Cambrian period with further sub-divisions of those units.

Key takeaways

  • Stratigraphic cycles belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Stratigraphic cycles to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Stratigraphic cycles from memory before moving on to harder problems.

Reference excerpt

Stratigraphic cycles refer to the transgressive and regressive sequences bounded by unconformities in the stratigraphic record on the cratons. These cycles represent a large scale eustasy cycle since the Cambrian period with further sub-divisions of those units.

Divisions

The division of these sequences were originally constructed in the Appalachian Basin and Cordilleran Basin of North America. Eventually these sequences were correlated in Russia and South America. The transgressive-regressive units show gaps in the rock records which indicate times of continual erosion and very little deposition. Local tectonics did not play a role in these global events, rather, a worldwide rise and fall of sea level (which is not to say that local tectonics have no influence on how the global events are expressed locally). Smaller orders in stratigraphic cycles have also been proposed. Fifth-order cycles and sixth order cycles have also been described in much of the Absaroka sequence. The time scale is much smaller and instead of Wilson cycle controlled sea-level change, these shorter cycles were controlled by glaciers (also called glacio-eustasy).

First-order cycles This cycle is most likely caused by the break-up and formation of super-continents. The earth went through major climatic swings over the course of 200 to 400 million years. From the late Pre-Cambrian to the late Cambrian, late Devonian to the Triassic-Jurassic border, and since the Miocene until the present time, the earth was an "icehouse", with ice sheets covering the poles. In the intervening years, the earth was a "greenhouse", with high global temperatures and elevated atmospheric CO2. Volcanic activity was also high in the greenhouse years. These long periods of continental emergence helped produce changes in ocean currents and the distribution of atmospheric heat.

Second-order cycles There are two competing arguments for second-order sea-level changes. The first states the sea level can be affected by the number of and the volume of the magma being produced at mid-ocean ridges. During times of increased sea floor spreading, more magma is being produced and the volume of the ocean basins are displaced by this. This would result in a higher sea level. This increase in magmatic activity corresponds to increased mantle activity and the Earth's magnetic field. Another theory is that earth's true polar wander occurs over a long period of time. The tectonic plates of the earth would move relatively faster due to imbalance of continents near the poles. This was true during the Cambrian Period, but the same event also happened approximately 66 million years ago but not as severely.

Third-order cycles This order of sea-level change has yet to be fully explained. It was originally thought that glaciers controlled these sea-level changes. But glaciers form and retreat far too rapidly, only tens of thousands of years instead of over a million years. Instead, short-term changes in earth's surface due to volcanics and tectonic events could change global sea levels over a million years. This change to earth's shape could produce "bulges" or "sags" that contribute to ocean level fluctuations.

Fourth order cycles Again, there are two competing theories for what controls fourth order cycles. Often called cyclothems, the relative short time period in which individual layers of rock are never more than 1 million years. Glaciers are capable of causing quick changes in sea level that can show up in the rock record. This mechanism has been proposed for many of the Carboniferous-aged coal deposits producing in some regions, such as North America, cycles of seashore advance and retreat of approximately 600 miles along the shallow slopes of the continental margins. Delta switching has been proposed as an additional mechanism to produce cyclothems. A modern analogue to describe delta switching would be the Mississippi embayment. As the Mississippi River carries its sediment load into the Gulf of Mexico, the delta lobe can become sediment-choked and the river will look for a new channel to follow the path of least resistance. Once the influx of terrestrial sand and silt stops, the area might subside and marine sediments may dominate. Also, whatever terrestrial plants are there can be buried and could eventually become coal. The new river channel will now carry the terrestrial sediments to a new delta, once again starting a new cycle of delta-switching.

Event stratigraphy This can refer to accumulation of sediments in one specific event. This event could be a large storm, landslide, volcanic eruption, or flood. The thickness of the bed could sometimes be over 50 feet (15 m) in depth. The uniform (or often the erratic) nature of the sediments in relation to the surrounding sediments is the only clue that a particular bed might have been deposited in a single event. A sandstone, for instance, that is well-sorted, contains erratic fossils (like brachiopods) and is wedged between sandstones that are generally poorly-sorted and contain minor siltstone layers and contains no fossils, can be interpreted as tempestite. Other event indicators could be volcanic ash falls, lava flows, lahars, and glacial ice-dam breaks; all of which have been identified in the rock record.

See also Milankovitch cycles, a set of forth to seventh-order (0.02-0.4 ma) climate cycles potentially resulting in stratigraphic cycles particularly during glacial climates

References

Worked examples

Example 1 — a first encounter with Stratigraphic cycles

Start with the simplest possible case. Write down what Stratigraphic cycles claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Stratigraphic cycles before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Stratigraphic cycles ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Stratigraphic cycles

In research
Stratigraphic cycles appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Stratigraphic cycles in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Stratigraphic cycles is common in secondary-school and first-year university syllabi. It links to neighbouring topics Stratigraphy, so understanding it makes those chapters shorter.
In everyday life
Look for Stratigraphic cycles outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Stratigraphic cycles” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Stratigraphic cycles in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Stratigraphic cycles means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Stratigraphic cycles out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Stratigraphic cycles in simple terms?

Stratigraphic cycles refer to the transgressive and regressive sequences bounded by unconformities in the stratigraphic record on the cratons. These cycles represent a large scale eustasy cycle since the Cambrian period with further sub-divisions of those units.

Why does Stratigraphic cycles matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Stratigraphic cycles?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Stratigraphic cycles.

Tags

  • Stratigraphy

Keep exploring