ArticleslgStudy

physics

Target indicator

Target indicator is a physics topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Target indicator rather than just read about it. In short: Target indicators, also known as target markers or TI's for short, were flares used by the RAF's Bomber Command during World War II. TIs were normally dropped by Pathfinders onto the target, providing an easily seen visual aiming point for the following "main force" of bombers to aim at.

Target indicator — main illustration
Target indicator — illustration

Key takeaways

  • Target indicator belongs to physics; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Target indicator to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Target indicator from memory before moving on to harder problems.

Reference excerpt

Target indicators, also known as target markers or TI's for short, were flares used by the RAF's Bomber Command during World War II. TIs were normally dropped by Pathfinders onto the target, providing an easily seen visual aiming point for the following "main force" of bombers to aim at. After their introduction, the use of TIs expanded to include en-route markers to gather up lost aircraft, additional TI drops to keep the target lit over long periods, and various changes in technique to address German defences. The use of TIs allowed the RAF to concentrate its advanced navigational systems in the Pathfinder units. Most widely used were the H2S ground scanning radar and Oboe navigation system, the former requiring considerable training to be useful, the latter able to guide only a single aircraft at a time. The limited number of navigational units meant that spreading them through the force would have limited effects. By concentrating these in a single Group (No. 8 Group RAF) and having them drop TIs, the accurate fixes could be used to guide the entire attack. The same basic system had been used by the Luftwaffe's Kampfgruppe 100 during The Blitz, for similar reasons. Target indicators were available in various colours, some with ejecting stars of the same or a different colour. During a raid, bomb aimers would be instructed by the Master Bomber to drop their bombs on the target indicators of a specified colour, the marker aircraft carrying different colours to be used if the initial target indicators were dropped off-target. The first target indicators could be cancelled over the radio by the Master Bomber and the marker crews instructed to drop new target indicators of a different colour, until the correct aiming point was correctly marked. The Main Force bombers would then be instructed by the Master Bomber to bomb the colour of the most accurate target indicators. Target indicators could be fuzed for both air and ground burst, the air burst markers – referred to as "sky marking" by the RAF – resembling bunches of grapes or upturned fir trees when detonated in the air under their parachutes. The Germans called these "Christmas trees" because of their shape. Marking of targets was carried out using the following methods:

"Newhaven" – target marking blind using H2S, then with visual backup marking "Parramatta" – target marking by blind-dropped ground markers, prefixed with "Musical" when the bombers were guided by Oboe "Wanganui" – target marking by blind-dropped sky markers when ground concealed by cloud, prefixed with "Musical" when Oboe-guided The three code words were initially chosen by asking three Bomber Command personnel in the operations room where they came from. One was from Newhaven, England, one from Parramatta, Australia, and one from Wanganui, New Zealand. Oboe was usually carried by Pathfinder de Havilland Mosquitoes.

History The first TIs were converted 4,000 lb (1,800 kg) "cookie" bomb casings filled with red pyrotechnic, benzole, rubber and phosphorus. These were nicknamed "pink pansies" and were used for the first time on the night of 10/11 September 1942 against Düsseldorf.

References

Bibliography Bennett, Donald C T, Air Vice-Marshall (1972). Pathfinder. London: Sphere Books.{{cite book}}: CS1 maint: multiple names: authors list (link) Bowman, Martin W. (2016). Voices in Flight: The Path Finder Force. Pen and Sword. ISBN 978-1-4738-8116-7. Neillands, Robin (2002). The Bomber War; Arthur Harris and the Allied Bomber Offensive 1939–1945. London: John Murray. ISBN 0-7195-5644-9. "Part I — Chapter 18 Target Identification Bombs", OP1665 British Explosive Ordnance (1970 ed.), US Navy Bureau of Ordnance, June 1946, pp. 127–141

Illustrations

Target indicator: Target indicators falling over Berlin during a raid on the city
Target indicators falling over Berlin during a raid on the city

Worked examples

Example 1 — a first encounter with Target indicator

Start with the simplest possible case. Write down what Target indicator claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In physics, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Target indicator before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Target indicator ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Target indicator

In research
Target indicator appears in physics research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Target indicator in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Target indicator is common in secondary-school and first-year university syllabi. It links to neighbouring topics Equipment of the Royal Air Force, Military equipment introduced from 1940 to 1944, Night flying, so understanding it makes those chapters shorter.
In everyday life
Look for Target indicator outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Target indicator in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Target indicator means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Target indicator out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Target indicator in simple terms?

Target indicators, also known as target markers or TI's for short, were flares used by the RAF's Bomber Command during World War II. TIs were normally dropped by Pathfinders onto the target, providing an easily seen visual aiming point for the following "main force" of bombers to aim at.

Why does Target indicator matter?

Because it connects several physics ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Target indicator?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Target indicator.

Tags

  • Equipment of the Royal Air Force
  • Military equipment introduced from 1940 to 1944
  • Night flying
  • Pyrotechnics

Keep exploring