ArticleslgStudy

science

Terrestrial television

Terrestrial television is a science topic covered in the lgStudy science library. This page brings together a partial reference excerpt, illustrations, worked examples, real-world applications and a short study plan, so you can understand Terrestrial television rather than just read about it. In short: Terrestrial television, or over-the-air television (OTA), is a type of television broadcasting in which the content is transmitted via radio waves from the terrestrial (Earth-based) transmitter of a TV station to a TV receiver having an antenna. This type of TV broadcast is distinguished from newer technologies, such as satellite television (direct broadcast satellite or DBS television), in which the signal is trans…

Terrestrial television — main illustration
Terrestrial television — illustration

Key takeaways

  • Terrestrial television belongs to science; place it in that map before memorising details.
  • Learn the definition first, then one example that makes the definition concrete.
  • Connect Terrestrial television to a quantity you can measure, compute or draw — that is where exam questions come from.
  • Reproduce the core statement of Terrestrial television from memory before moving on to harder problems.

Reference excerpt

Terrestrial television, or over-the-air television (OTA), is a type of television broadcasting in which the content is transmitted via radio waves from the terrestrial (Earth-based) transmitter of a TV station to a TV receiver having an antenna. This type of TV broadcast is distinguished from newer technologies, such as satellite television (direct broadcast satellite or DBS television), in which the signal is transmitted to the receiver from an overhead satellite; cable television, in which the signal is carried to the receiver through a cable; and Internet Protocol television, in which the signal is received over an Internet stream or on a network utilizing the Internet Protocol. Terrestrial television stations broadcast on television channels with frequencies between about 52 and 600 MHz in the VHF and UHF bands. Since radio waves in these bands travel by line of sight, reception is generally limited by the visual horizon to distances of 64–97 kilometres (40–60 miles), although under better conditions and with tropospheric ducting, signals can sometimes be received hundreds of kilometers distant. Terrestrial television was the first technology used for television broadcasting. The BBC began broadcasting in 1929 and by 1930 many radio stations had a regular schedule of experimental television programmes. However, these early experimental systems had insufficient picture quality to attract the public, due to their mechanical scan technology, and television did not become widespread until after World War II with the advent of electronic scan television technology. The television broadcasting business followed the model of radio networks, with local television stations in cities and towns affiliated with television networks, either commercial (in the US) or government-controlled (in Europe), which provided content. Television broadcasts were in greyscale (called black and white) until the transition to color television in the 1960s. There was no other method of television delivery until the 1950s with the beginnings of cable television and community antenna television (CATV). CATV was initially only a rebroadcast of over-the-air signals. With the widespread adoption of cable across the United States in the 1970s and 1980s, viewing of terrestrial television broadcasts has been in decline; in 2018, it was estimated that about 14% of US households used an antenna. However, in certain other regions terrestrial television continue to be the preferred method of receiving television, and it is estimated by Deloitte as of 2020 that at least 1.6 billion people in the world receive at least some television using these means. The largest market is thought to be Indonesia, where 250 million people watch through terrestrial.

Analog

Europe Following the ST61 conference, UHF frequencies were first used in the UK in 1964 with the introduction of BBC2. In the UK, VHF channels were kept on the old 405-line system, while UHF was used solely for 625-line broadcasts (which later used PAL color). Television broadcasting in the 405-line system continued after the introduction of four analog programs in the UHF bands until the last 405-line transmitters were switched off on January 6, 1985. VHF Band III was used in other countries around Europe for PAL broadcasts until the planned phase-out and switchover to digital television. The success of analog terrestrial television across Europe varied from country to country. Although each country had rights to a certain number of frequencies by virtue of the ST61 plan, not all of them were brought into service.

Americas The first National Television System Committee standard was introduced in 1941. This standard defined a transmission scheme for a black-and-white picture with 525 lines of vertical resolution at 60 fields per second. In the early 1950s, this standard was superseded by a backward-compatible standard for color television. The NTSC standard was exclusively used in the Americas as well as Japan until the introduction of digital terrestrial television (DTT). While Mexico has ended all its analog television broadcasts and the United States and Canada have shut down nearly all of their analog TV stations, the NTSC standard continues to be used in the rest of Latin American countries except for Argentina, Paraguay and Uruguay, where the PAL-N standard is used while testing their DTT platform. In the late 1990s and early 2000s, the Advanced Television Systems Committee developed the ATSC standard for digital high-definition terrestrial transmission. This standard was eventually adopted by many American countries, including the United States, Canada, Dominican Republic, Mexico, Argentina, El Salvador, Guatemala and Honduras; however, the four latter countries reversed their decision in favor of ISDB-Tb. The Pan-American terrestrial television operates on analog channels 2 through 6 (VHF-low band, 54 to 88 MHz, known as band I in Europe), 7 through 13 (VHF-high band, 174 to 216 MHz, known as band III elsewhere), and 14 through 51 (UHF television band, 470 to 698 MHz, elsewhere bands IV and V). Unlike with analog transmission, ATSC channel numbers do not correspond to radio frequencies. Instead, a virtual channel is defined as part of the ATSC stream metadata so that a station can transmit on any frequency but still show the same channel number. Additionally, free-to-air television repeaters and signal boosters can be used to rebroadcast a terrestrial television signal using an otherwise unused channel to cover areas with marginal reception. (see Pan-American television frequencies for frequency allocation charts) Analog television channels 2 through 6, 7 through 13, and 14 through 51 are only used for LPTV translator stations in the United States. Channels 52 through 69 are still used by some existing stations, but these channels must be vacated if telecommunications companies notify the stations to vacate that signal spectrum. By convention, broadcast television signals are transmitted with horizontal polarization.

Asia

… excerpt ends here. Continue reading the full article.

Illustrations

Terrestrial television: Indoor rabbit ears antenna often used for terrestrial television reception. This model also has a loop antenna for UHF reception.
Indoor rabbit ears antenna often used for terrestrial television reception. This model also has a loop antenna for UHF reception.
Terrestrial television illustration
Terrestrial television illustration
Terrestrial television: Rooftop television antennas like these are required to receive analog terrestrial television in fringe reception areas far from the transmitter.
Rooftop television antennas like these are required to receive analog terrestrial television in fringe reception areas far from the transmitter.

Worked examples

Example 1 — a first encounter with Terrestrial television

Start with the simplest possible case. Write down what Terrestrial television claims or describes in one sentence, then invent the smallest concrete situation in which that sentence is true. In science, the smallest case is usually a single object, a single equation or a single measurement. Check that every symbol or term in your sentence has a meaning in that case.

Example 2 — changing one variable

Take the situation from Example 1 and change exactly one quantity: double it, halve it, or set it to zero. Predict what should happen to Terrestrial television before you calculate. Comparing your prediction with the result is the fastest way to find out whether you understand the idea or only the words.

Example 3 — an exam-style question

Typical questions about Terrestrial television ask you to (a) state it precisely, (b) apply it to given data, and (c) explain a limitation. Practise writing all three answers in under five minutes; the third part is what separates a full-mark answer from an average one.

Applications of Terrestrial television

In research
Terrestrial television appears in science research whenever the underlying quantities have to be modelled precisely. Papers usually cite it as a starting assumption and then explore where it breaks down.
In technology and industry
Engineering practice reuses Terrestrial television in design rules, simulations and safety margins. Knowing the idea lets you read a specification sheet and understand why the numbers look the way they do.
In the classroom
Terrestrial television is common in secondary-school and first-year university syllabi. It links to neighbouring topics Television technology, Television terminology, so understanding it makes those chapters shorter.
In everyday life
Look for Terrestrial television outside the textbook — in sport, cooking, traffic, electronics or the sky above you. An example you found yourself is remembered far longer than one you were given.
Ask Teacher Smith questions about this articleOpens your AI tutor with a question about “Terrestrial television” →

Affiliate

Preply — study more efficiently by working with a personal tutor. 50% off.

How to study Terrestrial television in 20 minutes

  1. Read the reference excerpt below once, without taking notes.
  2. Close the page and write down what Terrestrial television means in your own words.
  3. Compare your version with the excerpt and mark what you missed.
  4. Work through the three examples above with pen and paper.
  5. Explain Terrestrial television out loud to somebody else — or to Teacher Smith in the lgStudy chat.

Frequently asked questions

What is Terrestrial television in simple terms?

Terrestrial television, or over-the-air television (OTA), is a type of television broadcasting in which the content is transmitted via radio waves from the terrestrial (Earth-based) transmitter of a TV station to a TV receiver having an antenna. This type of TV broadcast is distinguished from newer…

Why does Terrestrial television matter?

Because it connects several science ideas at once: it gives you a definition you can apply, a quantity you can calculate, and a way to check whether a result is plausible.

How should I study Terrestrial television?

Read the excerpt, restate it from memory, then work through the examples and applications listed on this page. The five-step study plan above takes about twenty minutes.

What does this page cover?

It gives you a compact reference excerpt plus original lgStudy explanations, examples, applications and study material on Terrestrial television.

Tags

  • Television technology
  • Television terminology

Keep exploring