In statistical thermodynamics, thermodynamic beta, also known as coldness, is the reciprocal of the thermodynamic temperature of a system: β ≡ 1 k B T {\displaystyle \beta \equiv {\frac {1}{k_{\rm {B}}T}}} (where T is the temperature and kB is Boltzmann constant). Thermodynamic beta has units reciprocal to that of energy (in SI units, reciprocal joules, [ β ] = J − 1 {\displaystyle [\beta ]={\textrm {J}}^{-1}} ). In non-thermal units, it can also be measured in byte per joule, or more conveniently, gigabyte per nanojoule; 1 K−1 is equivalent to about 13,062 gigabytes per nanojoule; at room temperature: T = 300K, β ≈ 44 GB/nJ ≈ 39 eV−1 ≈ 2.4×1020 J−1. The conversion factor is 1 GB/nJ = 8 ln 2 × 10 18 {\displaystyle 8\ln 2\times 10^{18}} J−1.
Description Thermodynamic beta is essentially the connection between the information theory and statistical mechanics interpretation of a physical system through its entropy and the thermodynamics associated with its energy. It expresses the response of entropy to an increase in energy. If a small amount of energy is added to the system, then β describes the amount the system will randomize. Via the statistical definition of temperature as a function of entropy, the coldness function can be calculated in the microcanonical ensemble from the formula
β = 1 k B T = 1 k B ( ∂ S ∂ E ) V , N {\displaystyle \beta ={\frac {1}{k_{\rm {B}}T}}\,={\frac {1}{k_{\rm {B}}}}\left({\frac {\partial S}{\partial E}}\right)_{V,N}}
(i.e., the partial derivative of the entropy S with respect to the energy E at constant volume V and particle number N).
Advantages Although completely equivalent in conceptual content to temperature, β is generally considered a more fundamental quantity than temperature owing to the phenomenon of negative temperature, in which β is continuous as it crosses zero whereas T has a singularity. In addition, β has the advantage of being easier to understand causally: If a small amount of heat is added to a system, β is the increase in entropy divided by the increase in heat. Temperature is difficult to interpret in the same sense, as it is not possible to "Add entropy" to a system except indirectly, by modifying other quantities such as temperature, volume, or number of particles.
Statistical interpretation From the statistical point of view, β is a numerical quantity relating two macroscopic systems in equilibrium. The exact formulation is as follows. Consider two systems, 1 and 2, in thermal contact, with respective energies E1 and E2. We assume E1 + E2 = some constant E. The number of microstates of each system will be denoted by Ω1 and Ω2. Under our assumptions Ωi depends only on Ei. We also assume that any microstate of system 1 consistent with E1 can coexist with any microstate of system 2 consistent with E2. Thus, the number of microstates for the combined system is
Ω = Ω 1 ( E 1 ) Ω 2 ( E 2 ) = Ω 1 ( E 1 ) Ω 2 ( E − E 1 ) . {\displaystyle \Omega =\Omega _{1}(E_{1})\Omega _{2}(E_{2})=\Omega _{1}(E_{1})\Omega _{2}(E-E_{1}).\,}
We will derive β from the fundamental assumption of statistical mechanics:
When the combined system reaches equilibrium, the number Ω is maximized. (In other words, the system naturally seeks the maximum number of microstates.) Therefore, at equilibrium,
… excerpt ends here. Continue reading the full article.
