Thermoresponsive polymers can be used as stationary phase in liquid chromatography. Here, the polarity of the stationary phase can be varied by temperature changes, altering the power of separation without changing the column or solvent composition. Thermally related benefits of gas chromatography can now be applied to classes of compounds that are restricted to liquid chromatography due to their thermolability. In place of solvent gradient elution, thermoresponsive polymers allow the use of temperature gradients under purely aqueous isocratic conditions. The versatility of the system is controlled not only through changing temperature, but through the addition of modifying moieties that allow for a choice of enhanced hydrophobic interaction, or by introducing the prospect of electrostatic interaction. These developments have already introduced major improvements to the fields of hydrophobic interaction chromatography, size exclusion chromatography, ion exchange chromatography, and affinity chromatography separations as well as pseudo-solid phase extractions ("pseudo" because of phase transitions).
Hydrophobic interaction chromatography
Gel permeation chromatography The research that appeared to spark an onslaught of modified applications was a gel permeation chromatography technique of fixing poly(isopropyl acrylate) (PIPA) strands to glass beads and separating a mixture of dextrans, which was developed by Gewehr et al. They found that between the temperatures of 25–32 °C, the elution time of dextrans at different molecular weights exhibited a dependence on the temperature. Dextrans of the highest molecular weight eluted first since the PIPA chains exhibit hydrophilicity at temperatures below the LCST. As the temperature of the elution increased, when the chains behave in a more hydrophobic manner, the elution times increased for each of the analytes for the given range. The trend generally applies over the entire temperature range, but there is a flattening of the curve before 25 °C and after 32 °C (the approximate LCST for this experiment). Above the LCST, the PIPA acts as a typical nonpolar stationary phase that would be used in reverse-phased chromatography. There are also instances of the elution times increasing below 15 °C, which most likely can be attributed to the lower temperatures’ effects on mass transfer playing a more significant role on retention than the stationary phase behavior. This study showed that the resolution could essentially be tuned by adjusting the operating temperature. The scope of this study was limited to isothermal conditions and attaching polymer chains to glass beads. The results, however, were satisfying enough to inspire other investigations and modifications to create a more versatile stationary phase for the advancement of chromatography.
Enhancing hydrophobic interaction Okano’s group expanded on their success by using different modifiers to enhance hydrophobicity through the attachment of butyl methacrylate (BMA), a hydrophobic comonomer. For simplification the resultant polymer has been labeled as IBc (isopropylacrylamide butyl methacrylate copolymer). The polymers were synthesized using radical telomerization with varying BMA content. Where pure PNIPAAm was unable to resolve hydrophobic steroids at any temperature, IBc-grafted silica stationary phases were able to resolve steroid peaks with increasingly retarded retention times in correlation to both increased BMA content and increased temperature. They went on to develop a method to separate phenylthiohydantoin(PTH)-amino acids using their IBc stationary phase with a stronger emphasis of implementing environmentally friendly conditions using a purely aqueous phase in HPLC. Another group separated catechins using PNIPAAm.
Modifying the LCST for improved experimental parameters Since the separation of biological molecules such as proteins would be better served by isocratic elution with an aqueous solvent, resolution of HPLC analysis should be tweaked in the area of stationary phases to elute such analytes that may be sensitive to organic solvents. Kanazawa et al. recognized the possibility of changing the LCST parameter through the addition of different moieties. Kanazawa’s group investigated the reversible changes of PNIPAAm once modifying it with a carboxyl end. It was suggested that the modification leads to faster changes in conformation due to the restrictions introduced by the carboxyl group. They attached the carboxyl-terminated PNIPAAm chains to (aminopropyl)silica and used it as packing material for HPLC analysis of steroids. The separation took place under isocratic conditions using pure water as the mobile phase, and controlled the temperature using a water bath. They were able to shift the LCST from 32 °C to 20 °C by making the solution 1M in NaCl concentration. Of the 5 steroids and benzene, only testosterone could be resolved from the other peaks below the LCST (5 °C, LCST=20 °C in 1M NaCl). Above the LCST (25 °C, LCST=20 °C in 1M NaCl), all of the peaks are well resolved, and there is an increasing trend of retention time versus temperature up to 50 °C.
… excerpt ends here. Continue reading the full article.
